• 복식문화연구
• /
• 제6권3호
• /
• pp.21-33
• /
• 1998

A project manager is required to have systematic knowledge in the project management in fashion and apparel industry. The Network Technique is a modern project management technique and applies to almost all industry sectors, including fashion and apparel industry. Through the Network Technique, we can save project time and cost. The purpose of present study are - to introduce the Network Technique into fashion and apparel industry management area, and - to make an practical application of he Network Technique to fashion and apparel industry. For these purpose, fist we define the Network Technique, and then we apply it to fashion show as an example. Only time component is considered in this study. Cost component can be dealt with later on in the project planning area.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1727-1728
• /
• 2006

Chemical mechanical polishing (CMP) technology has been widely used for global planarization of multi-level interconnection for ULSI applications. However, the cost of ownership and cost of consumables are relatively high because of expensive slurry. In this paper, we studied the mixed abrasive slurry(MAS). In order to save the costs of slurry, the original silica slurry was diluted by do-ionized water (DIW). And then, $ZrO_2$,$CeO_2$, and $MnO_2$ abrasives were added in the diluted slurry in order to promote the mechanical force of diluted slurry. We have also investigate the possibility of mixed abrasive slurry for the oxide CMP application.

• 한국산학기술학회논문지
• /
• 제11권7호
• /
• pp.2670-2675
• /
• 2010

한옥에서 축부는 건물의 외관과 실내 환경, 공사기간 및 공사비와 밀접한 관련을 지닌 부분이다. 본 연구에서는 전통적인 시공법을 분석하여 전통 한옥의 장점으로서의 특성을 유지하면서 개선된 한옥 축부의 시공법을 제안하였다. 그 개선안은 기성품의 사용, 전체 공정의 건식 조립공법화, 기둥과 벽체의 일괄 시공, 기밀성과 단열성능 향상 등의 특성을 지닌다. 앞으로 시제품의 제작과 성능 시험 등의 단계를 거쳐야 하겠지만 한옥의 형태적 특성을 유지하면서 공사기간과 공사비를 줄이는데 일조할 수 있을 것으로 기대한다.

• 한국항공운항학회지
• /
• 제26권4호
• /
• pp.142-148
• /
• 2018

In recent years, Korea's aviation industry has been developing rapidly due to the emergence of low-cost airlines. In order to survive in such competition, airlines are making various efforts to save the operation cost as much as possible. Fuel costs account for more than 25% of operating costs. For airlines, reducing aircraft fuel costs is an important part of improving profitability. In this study, analyzing the difference weight between flightplan and W&B Manifest for calculated the fuel that was unnecessarily loaded. As a method to calculate the unnecessary fuel was used by Airbus company flight planning program.

• 반도체디스플레이기술학회지
• /
• 제20권2호
• /
• pp.77-81
• /
• 2021

In this paper, a low-csst ECG system using a digital filter was implemented. After amplifying the analog ECG signal, it is converted into a digital signal and filtered. The developed ECG module is miniaturized by removing the analog filter element that occupies the existing volume and replacing it with a digital filter using a 3-stage Butterworth filter which is one of IIR filters. It uses a serial monitoring program with C# to check and save the ECG waveform measured on a computer screen. The ECG system using a developed digital filter in this paper uses a low-cost processor instead of an expensive, high-end processor, and its size and price are reduced by converting the analog filter to a digital filter. In addition, since the waveform of the developed ECG system is similar to the actual ECG waveform of MIT-BIU, it is considered that the existing analog filter can be replaced with the developed digital filter.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.1328-1333
• /
• 2009

On the construction area, Information Technology (IT) has been a considerably significant part over the all phases; plan, design, procurement, construction and post-construction. For example, CALS, CITIC, PMIS, FMS, BIM and etc, designed and applied for managing construction industry are already valuable to improve on the Construction Management (CM). To develop these management methods, lots of mixed-systems are studied and progressed so far. In this paper, more useful and efficient system modules are proposed through investigating PMIS cases implemented, especially medical projects, to improve into FMS on the post-construction. Because most PMIS on the construction phase is used not to continue as FMS, considerable cost and time is consumed to rebuild the system, even both systems have common modules. As these wastes are faced to design systems, the important modules on PMIS are derived and analyzed to apply to FMS to save time and cost on CM.

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.1193-1198
• /
• 2005

The pre-assembly takes a large portion of the fabrication cost of steel bridges. In order to save the fabrication cost through the improvement of the conventional pre-assembling process, this research investigates a numerical pre-assembly simulation as an alternative to current pre-assembling process. The 3D laser scanning was utilized in site and measuring data for steel box were analyzed. The productivity of pre-assembly simulation system is compared with the conventional pre-assembling system. This paper identifies feasibility on the alternative pre-assembling process and then proposes the scheme of the pre-assembly simulation system development satisfying the current pre-assembly inspection of standards.

• 상하수도학회지
• /
• 제13권1호
• /
• pp.95-112
• /
• 1999

In this research, it is proposed that optimization method is introduced and applied to the design of pipeline system in multi-regional water supply project, which has been constructed to settle the regional unbalance problems of available water resources. For the purpose, interface programs are developed to integrate linear programming model and KYPIPE model which is used for optimization and hydraulic analysis, respectively. The developed program is applied to the pipeline system design of multi-regional water supply project. The optimal diameters from the application of linear programming technique are compared with those from conventional method that is time-consuming and tedious trail and error process. Since the conventional design largely depends upon the experience of designers and the results of general hydraulic analysis, it can not be reasonable and consistent. The application of linear programming technique can make it possible to design pipeline system optimally by using same design factors of general hydraulic models. The model can select commercial discrete pipe diameter as optimal size by using pipe length as decision variables. The developed model is applied to Pohang multi-regional water supply system design with two different objective functions, which are initial construction cost and annual cost including electric cost. As results, it is calculated that the initial construction cost of 1,449,740 thousand won is saved and annual cost of 128,951 thousand won is saved for a year within study year. Also, the optimal site of pump station is selected on 5th pipe, which is located between the diverging junction to Kangdong(2) province and the diverging junction to Cheonbuk province. It is explained that pump cost is less than pipe cost in this application case study due to little pump station scale. In the case of water supply with large pump capacity, it is reasonal that the increase of pipe size is more efficient instead the increase of pump station capacity to save annual cost.

• KIEAE Journal
• /
• 제15권5호
• /
• pp.13-20
• /
• 2015

Purpose: In order to upgrade the energy performance of existing building, energy audit stage should be implemented first because it is useful method to find where the problems occur and know how much time and cost consumption for retrofit. In overseas researches, three levels of audit is proposed whereas there are no standards for audit in Korea. Besides, most studies use dynamic simulation in detail like audit level 3 even though the level 2 can save time and cost than level 3. Thus, this paper focused on audit level 2 and proposed the audit method with the simple linear regression analysis model. Method: Two parameters were considered for the simple regression analysis, which were the monthly electric use and the mean outdoor temperature data. The former is a dependent variable and the latter is a independent variable, and the building's energy performance profile was estimated from the regression analysis method. In this analysis, we found the abnormal point in cooling season and the more detailed analysis were conducted about the three heat source equipments. Result: Comparing with real and predicted models, the total consumption of predicted model was higher than real value as 23,608 kWh but it was the results that was reflected the compulsory control in 2013. Consequently, it was analyzed that the revised model could save the cooling energy as well as reduce peak electric use than before.

• 한국환경복원기술학회지
• /
• 제8권5호
• /
• pp.19-27
• /
• 2005

The earth is a huge magnet. All organisms live under the magnetism of earth. The magnetism influences the ions in the cells of organisms and variously functions to lives as well. The medical treatment with magnet has come down from the ancient, it has an effect on the plants' growth. But there are no scientific studies about the influences of magnetism on plant growth. Accordingly, the experiment about the influence of magnetism on several foliage plants was carried out in this study. The promotion of plants' growth led by magnetism will be the method to save the management cost of horticultural market by early shipment. As a results of this experiment, plants treated with magnets showed excellent growth especially in length growth. The experiment results of the respective plants are the following. 1. Rhapis flabelliformis : This have grown so very well in the container lined with magnets as time goes by. Showing the significant(p<0.05) differences, the length growth of Height and Length of leaves was especially distinguished. 2. Howea belmoreana : This has grown well in all containers. Showing the significant(p<0.05) differences, the length growth of Height and Length of leaves was especially distinguished. 3. Chamaedorea seifrizii : There have been the growth differences between Height and Length of leaves as time goes by. The growth of Height and Length of leaves in the container lined with magnets has been excellent. The number of leaves and number of branch generally had no big differences but the growth of Height and Length of leaves was excellent in the magnet container. The method of plant growth promotion with magnet should save the management cost for this reason. Therefore the succeeding studies about the plant growth under the influence of magnet intensity and kind must be performed. The studies with various plants are needed to activate the program for growing plants with magnet.