• 한국도로학회논문집
• /
• 제15권2호
• /
• pp.149-157
• /
• 2013

PURPOSES : This study is to analysis for benefit and construction cost in underpass for small vehicles. METHODS : The study was performed using the traffic software VISSIM 5.20 for analysis on a variety of traffic conditions and analysed of benefits of changes through analysis of travel speed and travel time after modeling of existing underpass and small vehicle underpass. RESULTS : Results of this study, the benefits will be reduced by the introduction underpass for small vehicles were analyzed because heavy vehicles use the intersection above the underpass. However, it was required economic analysis considering both the benefits reduction and the construction costs reduction because it has the effect of reducing the construction cost. Showed that the difference in benefit changes depending on the v/c and heavy vehicles ratio and construction cost was difference by types of underpass. As a result of performing economic analysis with total benefits and construction cost, it was analyzed to be economical in underpass over a certain size. CONCLUSIONS : The result of this study are expected to be able to contribute to reviewing for feasibility due to the small vehicles underpass introduction and economic analysis. The study is case study to the underpass in Daegu. Therefore, the future requires the calculation of benefits reflect a wider range of traffic conditions and the economic analysis to construction cost calculation for various types of grad separation facilities.

• Nuclear Engineering and Technology
• /
• 제39권5호
• /
• pp.655-662
• /
• 2007

Most decision makers in the electricity industry plan their electric power expansion program by considering only a least cost operation, even when circumstances change with differing complexities. It is necessary, however, to analyze a long-term power expansion plan from various points of view, such as environmental friendliness, benefit of a carbon reduction, and system reliability, as well as least cost operation. The objective and approach of this study is to analyze the proper role of nuclear power in a long-term expansion plan by comparing different scenarios in terms of the system cost changes, $CO_2$ emission reduction, and system reliability in relation to the Business-As-Usual (BAU). The conclusion of this paper makes it clear that the Korean government cannot but expand the nationwide nuclear power program, because an increased energy demand is inevitable and other energy resources will not provide an adequate solution from an economic and sustainability point of view. The results of this analysis will help the Korean government in its long-term resource planning of what kinds of role each electric resource can play in terms of a triangular dilemma involving economics, environmental friendliness, and a stable supply of electricity.

• 한국전기전자재료학회논문지
• /
• 제16권5호
• /
• pp.385-389
• /
• 2003

There are four main components of the CMP process: polishing pad, slurry, elastic supporter, and pad conditioner. The polishing pad is an essential component to the reproducibility of polishing uniformity in CMP process. However, the polishing pad in recently using metal CMP raised the several points of high cost caused by the increase of cycle time and the many usage of slurry. It is necessary to develop the novel polishing pad which would lead the cost reduction by the higher pad life-cycle, minimized cycle time and lower slurry usage. The characteristics of polishing pad were studied on the effects of different sets of the Polishing pad, which can be applied to metal chemical mechanical polishing process for global planarization of multilevel interconnection structure. The main purpose of this experiment is cost reduction by the increase of pad life-time, the decrease of cycle time and the lower usage of slurry through the specific hard porous structured pad design. It is confirmed that the novel polishing pad made the slurry usage decrease to 60% as well as the pad life-time increase twice with the 25% improvement of removal rate. The polishing time could be decreased and it also helped the cycle time to diminish. It can be expected that this results will help both the process throughput and the device yield to be improved.

• 산업공학
• /
• 제19권4호
• /
• pp.316-323
• /
• 2006

In this study, based on Weibull proportional age reduction model and age replacement policy, we analyze economic life of cutting tool which allows re-grinding. Re-grinding task, usually for high-priced machining tools(e.g., broaching tool), is a kind of preventive maintenance activities to extend tool life at the completion of a lot production. The numerical results are also presented. Among the parameters of Weibull proportional age reduction model, the re-grinding effect parameter and Weibull shape parameter have a strong effect on economic tool life, and in the cost parameters, shortage cost is most sensitive. With further study on the parameter estimation of tool life process and cost function, this study can be expected to give more practical contribution to management of general machining tools.

• 서비스연구
• /
• 제7권1호
• /
• pp.65-82
• /
• 2017

본 연구는 국내 서비스산업의 기업체를 대상으로 고몰입 인적자원관리의 수준이 서비스성과에 미치는 효과와 조직의 내적인 혁신방향이 갖는 매개효과를 분석하였다. 구체적으로 내적인 혁신 방향은 기업의 인력과 서비스의 고부가가치화 방향과 비용절감 다운사이징 방향으로 구성되며, 인력과 서비스의 고부가가치화 방향은 긍정적인 매개효과를 가질 것으로, 비용절감 다운사이징 방향은 부정적인 매개효과를 가질 것으로 예측하였다. 분석을 위한 자료는 한국노동연구원(KLI)의 2013년도 사업체패널 조사자료(WPS)의 1,775개 업체 중 도소매, 운수, 전문과학서비스, 교육서비스, 보건사회복지서비스, 금융서비스, 기타(정보사회지원서비스 등)서비스로 분류되는 896개 사업체의 응답을 활용하였다. 가설검증을 위한 분석은 구조방정식 분석을 사용하였다. 분석 결과, 고몰입 인적자원관리는 고부가가치화 혁신방향에 긍정적인 영향을 미치며, 비용절감 다운사이징에는 부정적인 영향을 미치는 것으로 나타났다. 또한 고부가가치화 혁신방향은 서비스성과에 긍정적인 영향을 미쳤으며, 비용절감 다운사이징은 서비스성과에 부정적인 영향을 미치는 것으로 나타났다. 그리고 고몰입 인적자원관리의 서비스성과에 대한 직접효과를 확인하지 못하였으나, 고부가가치화 혁신 방향의 긍정적인 매개효과와 비용절감 다운사이징 혁신 방향의 부정적인 매개효과가 유의한 것으로 나타나 두 변수가 고몰입 인적자원관리와 서비스성과의 관계에 대해 완전매개효과를 가지는 것을 확인하였다.

• 한국콘텐츠학회논문지
• /
• 제18권1호
• /
• pp.422-430
• /
• 2018

최근 유가 상승과 건물 에너지 소비 증가는 에너지 자원 해외 의존도가 높은 우리나라에 큰 부담이 되고 있다. 이런 상황에서 에너지 소비량의 40% 수준을 차지하는 빌딩건물의 에너지절감은 매우 중요한 이슈가 되는데, 본 연구는 ICT를 활용하여 건물에너지 소비량 및 전력사용요금 절감을 하는 최적제어방법을 구현한 실증 분석을 병원을 대상으로 수행하였다. 먼저 기존의 냉난방용 흡수식 냉온수기와 급탕용 보일러시설 일부를 수축열 히트펌프로 대체하고 사용하는 요금제의 조정을 통해 에너지소비량을 줄이고 요금을 절감하였다. 여기에 환경(외기온도, 사용량 증감 등) 변화를 고려한 ICT 기반 최적제어 기능을 추가적으로 적용함으로 기존 설비 대체 중심의 에너지절감 방법과 ICT 기반의 최적제어방법까지 고려한 효과를 분석하였다. 그 결과 본 연구에서 병원 대상의 최적제어방법은 에너지효율화 설비 적용으로 인한 절감량(53.6%)에 최적자동제어 효과(18.2%)까지 추가적으로 절감할 수 있는 것을 확인하였다. 본 연구 결과를 바탕으로 건물 에너지 절감 성과를 높이는 다양한 방안을 검토해 볼 수 있을 것이다.

• Bulletin of the Korean Chemical Society
• /
• 제34권7호
• /
• pp.2167-2170
• /
• 2013

A low-cost and simple recycling process of waste thermoelectric modules has been investigated using chemical reduction methods. The recycling is separated by two processes, such as dissolving and reduction. When the waste thermoelectric chips are immersed into a high concentration of $HNO_3$ aqueous solution at $100^{\circ}C$, oxide powders, e.g., $TeO_2$ and $Sb_2O_3$, are precipitated in the $Bi^{3+}$ and $HTeO{_2}^+$ ions contained solution. By employing a reduction process with the ions contained solutions, $Bi_2Te_3$ nanoparticles are successfully synthesized. Due to high reduction potential of $HTeO{_2}^+$ to Te, Te elements are initially formed and subsequently $Bi_2Te_3$ nanoparticles are formed. The average particle size of $Bi_2Te_3$ was calculated to be 25 nm with homogeneous size distribution. On the other hand, when the precipitated powders reduced by hydrazine, $Sb_2O_3$ and Te nanoparticles are synthesized because of higher reduction potentials of $TeO_2$ to Te. After the washing step, the $Sb_2O_3$ are clearly removed, results in Te nanoparticles.

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 1998년도 춘계 학술논문발표회 논문집
• /
• pp.265-270
• /
• 1998

As the goal of enterprises is to pursuit benefits, the goal of safety management is not only preventing accidents but also promoting benefits and productivity. However, enterprises have failed to realize the necessity of safety management, partly because they didn't grasp any appropriate evidences advocating effectiveness of safety management. This study aimed to survey construction-site engineers' consciousness on safety management contributing to cost reduction, construction period and quality enhancement. The result of this study showed that constriction-site engineers recognized the ratio of direct cost to Indirect cost as 1:2. The proportion of repliers who thought that safety management is contributable to cost reduction was 35％, to construction period was 20％, and to quality enhancement was 48％. The construction sites with excellent safety accomplisments also had good work and selling amounts.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
• /
• pp.125-128
• /
• 2003

In this paper, we propose two methods for complexity reduction of intra prediction in H.264/AVC. One is skipping of intra prediction using inter prediction cost at current macroblock in current P picture, average of intra prediction cost in previous I picture, and average of inter prediction cost in previous P picture. The other is skipping of intra 16$\times$16 prediction using intra 4$\times$4 prediction cost and modes. As a result, complexity of intra prediction in P picture and that of intra 16$\times$16 prediction in intra prediction macroblock can be reduced by about 80~99％ and 50~93％, respectively.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1542-1548
• /
• 2010

Transportation cost takes a major portion on logistics cost. The reduction of transportation cost is a key issue to achieve national competitiveness and logistics cost reduction. And railway must play a important role to shift from road freight transport to environment-friendly transport. There are many idle freight cars in railway freight transportation and they give rise to inefficient operation of freight car. It is well known that the main reason of idle freight cars is unbalanced demand according to direction. In this study, we analysed the current status on idle freight cars in railway at the level of daily data. This results help follow-up research to cut down idle freight cars in railway.