• Journal of the Korea Organic Resources Recycling Association
• /
• v.10 no.1
• /
• pp.128-138
• /
• 2002

Waste recyling is a very important concept with waste minimization in the waste managment. Especially, recycling waste from the point of environmental and economical view is useful. The recycling part of package waste needs to continuously grow. But, cosmetic container, which is continuosly increased as waste. The difficulty of waste treatment in cosmetic industy produces complicated environment problem. Cosmetic container is difficult to recycle because it mostly made of complex material. Also, cosmetic container is difficult to separate I source and thus usually are generated mixed waste. In this study we performed an analysis on the Recycling Improvement method of a Cosmetic Container The result of this study could be summarized as follows 1) As a part of law and a system improvement, must be achieved Improvement Cosmetic law, Deposit refund system. and charge system, Technology development for recycling of a cosmetic container, Extension of refill productions, Recovery system establishment of a cosmetic container and inducement of a maker's recycling paticipation. 2) As a part of a cosmetic container design improvement, must be achieved simplification and standardize of container's cuality, Cosmetic life cycle extension, Selection of recycling materials and Cosr reduction of a cosmetic container. In conclusion, To the recycling improvement of a cosmetic container, must be achived collective development of system improvement, participation of the government and company and a consumer's recycling consciousness. Most of all, A company need to try to recycling container development of a cosmetic container.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.19 no.3
• /
• pp.133-138
• /
• 2013

In this study, we developed cosmetic container's volume index to compare the packaging volumes of fundamental cosmetic types. Over 250 cosmetics used for this study were collected in Korean market. The written content volume and the outer volume of packaging were analyzed to establish volume index (Lcos) and a design guideline for cosmetic container. The allowable ranges, such as maximum, acceptable, and optimum ranges in the design process, were also determined using Lcos. About 37% of cosmetics were in optimum or acceptable ranges. A 15% of cosmetic packages was in maximum range for reducing their volumes. This cosmetic container's volume index may be a useful tool as a design guideline for cosmetic packaging development.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.3
• /
• pp.92-98
• /
• 2020

In this study, an injection mold with conformal cooling channels was designed and manufactured for use in the production of a thick plastic cosmetic container that required high gloss surfaces. A cooling analysis verified the design of the conformal cooling channel for the cosmetic container, and also showed that the cooling efficiency was superior to that of the straight cooling channel. Slide cores designed with the conformal cooling channel were manufactured using the Layers Parting method and vacuum diffusion bonding. Subsequent test injection and quality inspection showed no problem in the appearance and dimensional accuracy of the produced product. The cycle time for product production was about 110 seconds, sufficient for mass production.

• The Journal of Industrial Distribution & Business
• /
• v.12 no.3
• /
• pp.21-29
• /
• 2021

Purpose: The cosmetic industry is one of the significant sectors of the economy that has attracted a wide range of players due to the fast growth rate. The purpose of this research is to identify the effect of container design in influencing consumer purchase intention, pulling together collected textual data regarding two factors. No other research conduct to measure this relationship. Research design, data and methodology: Using web data searching tools, the present researcher coded the data obtained. The web content analysis platform is useful because it allows a researcher to examine themes in texts and, in a way, allows an ideal way to understand links within categories of data. Results: Different components of container design have different impacts on the purchase behavior of different consumers. The most crucial container design components include; shape, color, material and textual, and artistic features. These components are used by designers for different purposes and have different levels of appeal to the consumer. Conclusions: Manufacturers in the cosmetic industry must invest in designing packaging products that are more appealing in shape and color while using high-quality materials to packaging these products. The packaging containers should also be designed to incorporate textual and artistic features that provide more information regarding the products.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.2
• /
• pp.73-78
• /
• 2023

The cosmetics industry faces a significant challenge in addressing the decreased recycling rate of cosmetic containers due to the composite materials used to meet consumers' aesthetic satisfaction. To address thees issues, eco-friendly packaging solutions such as refill packaging and single-material use have been developed. However, the market for eco-friendly cosmetics packaging requires a product that meets consumers' demands for aesthetics, sensitivity, and eco-friendliness while also performing as well as existing products. This study presents a solution to the challenge of the decreased recycling rate of cosmetic containers by developing a new cosmetic packaging product for cream formulations. The product features an easily separable and dischargeable internal refill container, while maintaining the design aesthetics of the external container. Through various tests, the product was shown to be of equivalent quality and performance to existing cream cosmetic packaging, with no leakage or defects observed. Furthermore, the use of a single-material polypropylene refill container is expected to contribute to the improvement of the plastic recycling rate.

• The monthly packaging world
• /
• s.253
• /
• pp.45-49
• /
• 2014

• Design & Manufacturing
• /
• v.12 no.2
• /
• pp.51-56
• /
• 2018

Generally, The women was used in the cosmetic cushion fact. It has developed with the consideration of manufacturing. In this study, we designed green-friendly and element parts lower and single cushion fact containers using a single material. Injection mold simulation were performed using on 3D design data. The injection mold simulation used the data (Injection time / Cooling time / Temperature / Pressure) in the injection mold parameters. In addition, the sink mark phenomenon in the simulation results is analyzed as a problem due to the thickness and further research is needed in the future.

• Design & Manufacturing
• /
• v.13 no.3
• /
• pp.35-40
• /
• 2019

As the consumer market in the cosmetic, vehicle manufacturing and aerospace industries grows, the demand for manufacturing industries using on injection mold technology. Also, such manufacturing technology of metal machining is expensive, and the shape is limited. Cosmetic cushion fact products are divided into outer relevant to the exterior of the product and inner containers containing the actual contents. In the case of the inner container, it needs to be combined with the upper and lower cases. As environmental regulations are strengthened internationally, the use of a large number of component parts can result in significant losses in recycling and economics. Therefore, this study aims to perform injection molding analysis through injection molding simulation to develop a cushion fact container that can be recycled through the unification of products and materials using polypropylene to cope with environmental regulations. In the case of injection molding conditions, Injection Time(sec): 4.5, Cooling Time(sec): 13, Resin Temperature($^{\circ}C$): 240, and Pressure(MPa): 30 were determined. The results of injection molding simulation according to the two design methods were compared with the sync mark which shows the problem of filling and injection molding.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.18 no.1
• /
• pp.132-149
• /
• 1992

This study relates to a microemulsion gel which is applied in various cosmetic preparations because of good appearance, superior stability and a thin, uniform, non-greasy fi Am on the skin. Main object of this study is to elucidate the influence of polyol(clarifying agent and/or coupling agent in microemulsion) on microemulsion and to establish the optimum conditions for microemulsion gel formation in the view of superior consistency, stability, clarity and pick-up from a container. The constituents of the system are composed of water, polar ester oi1, nonionic surfactant and polyol. Using the three-component phase diagram and the tetrahedral-phase diagram, we have investigated the changes of transparence regions, consistency and resonance effect by an impact in microemulsion gel varying in polyol ratio. The results of this study showed that the variation in the content of water and couple ins agent has major influence on the microemulsion gel and the optimum formation region of microemulsion gel is the widest when the ratio of glycerine(coupling agent) to water is 63-75% It is believed that optimum use of polyol seems to be helpful to obtain the microemulsion gel containing maximum amount of oil phase with minimum amount of surfactant which is recently one of the major problems of cosmetic chemists.

• Journal of the Economic Geographical Society of Korea
• /
• v.19 no.3
• /
• pp.550-565
• /
• 2016

The size of Korean and global cosmetic industry market are consistently growing and the domestic cosmetic industry's rate of total production increase is higher than GDP in Korea. In addition, the Korean Wave has strengthened not only this phenomenon but also the increase of exports. For these reasons, the purpose of this paper is to analyze Korean cosmetic industry regarded as a new growth engine. For this study, Porter's Value Chain theory, Mudambi's Smile of Value Creation, Cosmetic GMP by ISO, and the production process on cosmetic industry are used as tools. As a result, Korean cosmetic industry comprises five nodes value chains: R&D, Raw Material Manufacture, Container Manufacture, Cosmetic Manufacture, and Marketing. And then, based on this result, the spatial analysis is conducted to identify spatial distribution characteristics of each node.