• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.3
• /
• pp.25-34
• /
• 2004

The ability to perform the same operations in the transform domain as in the spatial domain is important for efficient image transmission through a channel. We perform image resizing, which includes magnifying and reducing the size, in the discrete cosine transform(DCT) domain and the effects of the transform domain approach are analyzed in the corresponding spatial domain. Based on this analysis, the two resizing algorithms are proposed. The first one further compresses the images encoded by the compression standard by reducing the size before compression, and the other reduces the loss of information while maintaining the conventional compression rate. Because of its compatibility with standard codec, these algorithms can be easily embedded in JPEG and MPEG codecs, which are widely used for the purpose of image storage and transmission. Experimental results show a reduction of about half the bit size with similar image quality and about a 2- or 3-dB quality improvements in the similar compression rate.

• Journal of IKEEE
• /
• v.3 no.1 s.4
• /
• pp.133-140
• /
• 1999

When the current optical communication system is used for the DWDM, it raise the serious interference because an interval between the adjacent channels is narrow. The FBG filter for the DWDM is able to reduce the interferences between the adjacent channels. In this paper, therefore, we find the reflection spectrums for the three types of induced index changes, that is, uniform, Gaussian apodized, and raised-cosine apodized. From the obtained results in this paper, we can see that uniform FBG does not fit, and that the smaller the maximum induced index change ${\sigma}$ is and the larger the value of parameter C in the raised-cosine apodized FBG and G in the Gaussian apodized FBG are, the fitter they are on the narrow filter for DWDM. But, we can also see that the raised-cosine apodized FBG has more excellent property than the Gaussian apodized FBG because it has the narrower maximum reflection spectrum band and the lower sidelobes than the other.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.10
• /
• pp.863-871
• /
• 2017

LMS (least mean square) algorithm widely used in the AVCS (active vibration control system) of helicopters calculates control input using the forward path transfer function and error signal. If the error signal is sinusoidal, it can be represented as the combination of cosine and sine functions with frequency and phase synchronized with the reference signal. The control input also has the same frequency, therefore control algorithm can be simply implemented if the cosine and the sine amplitudes of the control input are calculated and the frequency and phase of the reference signal are used. Calculation of the control input is implemented as simple matrix operation and the change of the control command is slower than the frequency of the error signal, consequently control algorithm can be operated at lower frequency. The signal processing algorithm extracting cosine and sine components of the error signals are modeled using Simulink and PIL (processor-in-the-loop) mode simulation was executed for real-time performance evaluation.

• The Korean Journal of Applied Statistics
• /
• v.20 no.2
• /
• pp.323-332
• /
• 2007

We present a new type of portmanteau test in the frequency domain which is derived from the discrete cosine transform(DCT). For the stationary time series, DCT coefficients are asymptotically independent and their variances are expressed by linear combinations of autocovariances. The covariance matrix of DCT coefficients for white noises is diagonal matrix whose diagonal elements is the variance of time series. A simple way to test the independence of time series is that we divide DCT coefficients into two or three parts and then compare sample variances. We also do this by testing the slope in the linear regression model of which the response variables are absolute values or squares of coefficients. Simulation results show that the proposed tests has much higher powers than Ljung-Box test in most cases of our experiments.

• Journal of the Korean Society for information Management
• /
• v.24 no.4
• /
• pp.267-283
• /
• 2007

In this study, measures of distributional similarity such as KL-divergence are applied to cluster documents instead of traditional cosine measure, which is the most prevalent vector similarity measure for document clustering. Three variations of KL-divergence are investigated; Jansen-Shannon divergence, symmetric skew divergence, and minimum skew divergence. In order to verify the contribution of distributional similarities to document clustering, two experiments are designed and carried out on three test collections. In the first experiment the clustering performances of the three divergence measures are compared to that of cosine measure. The result showed that minimum skew divergence outperformed the other divergence measures as well as cosine measure. In the second experiment second-order distributional similarities are calculated with Pearson correlation coefficient from the first-order similarity matrixes. From the result of the second experiment, secondorder distributional similarities were found to improve the overall performance of document clustering. These results suggest that minimum skew divergence must be selected as document vector similarity measure when considering both time and accuracy, and second-order similarity is a good choice for considering clustering accuracy only.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.6
• /
• pp.1-8
• /
• 1999

Multi-carrier CDMA is a transmission scheme where data symbols are spread in the frequency domain with a spread code then transmitted using multiple carriers. It is robust against narrowband interference because of its long symbol duration. However, due to large sidebands of the rectangular window frequency response, subchannels spectrally overlap with neighboring subchannels, which leads to substantial intercarrier interference in a dispersive channel. In this paper, we consider a mult-carrier CDMA system where subchannel spectral containment is achiveved by M-band cosine modulated filter bank (CMFB). In CMFB based MC-CDMA, subchannel spectral containment is achieved using the filter bank of longer impulse response than that of conventional discrete Fourier transform (DFT) filter bank. We show that spectral containment feature of the CMFB based fading channel is analyzed using computer simulations.

• Journal of Advanced Marine Engineering and Technology
• /
• v.17 no.5
• /
• pp.71-85
• /
• 1993

The Cycloconverter that the author is going to treat in this paper, has strong advantages over the D.C. Link Inverter in points of chattering torque problem and natural commutation. Thus, the Cycloconverter is expected to be well applied to large and low-speed machines which require better speed control at low frequency. But the control circuit of Cycloconverter has two weak points described as follows. 1) Because of its rather complicated control circuit, it is likely to be illoperating due to unexpected noise signals, thus the higher the accuracy and reliability of the circuit is required to be, the more the circuit may cost. 2) Because the load current is not purely sinusoidal, the Cycloconverter may possibly be destroyed in case of inaccurate convert switching resulted from the difficulties in detecting the load current-zero and the current direction at the moment. In this paper, the author first of all intends to design and build a modified VVVF-type Noncirculating Current Cycloconverter to which recently proposed control methods are applied for improving the circuit simplicity, the control performance, and the system reliability. And then, experiments for observing the output waveforms of the Cycloconverter which is controlled by Singled-Board Computer using 8086 16-bit microprocesser are carried out. Finally the author concludes the result of this study as follows. 1) By replacing the conventional analog control circuits such as Reference Wave Generator, Cosine Timing Wave Generator, and Comparator with softwares, a great circuit simplicity is achieved. 2) The output of the designed Cycloconverter changes its frequency very fast without showing discontinuity of its waveform, and this waveform characteristics enables the smooth speed control of Induction Motor. 3) The design control circuit of Cycloconverter can be applied to the systems of 12 or 24 pulses because of its short processing period.

• Journal of Sensor Science and Technology
• /
• v.21 no.1
• /
• pp.59-67
• /
• 2012

It was reported that the latest sensor technology allow an 65536 conductive polymer sensor array to be made with broad but overlapping selectivity to different families of chemicals emulating the characteristics found in biological olfaction. However, the supernumerary redundancy always accompanies great error and risk as well as an inordinate amount of computation time and local minima in signal processing, e.g. neural networks. In this paper, we propose a new method to reduce the number of sensor for analysis by reducing redundancy between sensors and by removing unstable sensors using the cosine similarity method and to decide on representative sensor using FCM(Fuzzy C-Means) algorithm. The representative sensors can be just used in analyzing. And, we introduce DWT(Discrete Wavelet Transform) for data compression in the time domain as preprocessing. Throughout experimental trials, we have done a comparative analysis between gas sensor data with and without reduced redundancy. The possibility and superiority of the proposed methods are confirmed through experiments.

• Journal of Broadcast Engineering
• /
• v.22 no.3
• /
• pp.366-374
• /
• 2017

Since a display device such as TV or digital signage is getting larger, the types of media is getting changed into wider view one such as UHD, panoramic and jigsaw-like media. Especially, panoramic and jigsaw-like media is realized by stitching video clips, which are captured by different camera or devices. However, a stitching process takes long time, and has difficulties in applying for a real-time process. Thus, this paper suggests to find out 2D Adjacency Matrix, which tells spatial relationships among those video clips in order to decrease a stitching processing time. Using the Discrete Cosine Transform (DCT), we convert the each frame of video source from the spatial domain (2D) into frequency domain. Based on the aforementioned features, 2D Adjacency Matrix of images could be found that we can efficiently make the spatial map of the images by using DCT. This paper proposes a new method of generating 2D adjacency matrix by using DCT for producing a panoramic and jigsaw-like media through various individual video clips.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10C
• /
• pp.1001-1009
• /
• 2009

In this paper, an efficient blind frequency offset estimation method for radio resource saving in orthogonal frequency division multiplexing (OFDM) systems is proposed. In the proposed method, we obtain two time different received OFDM signal blocks by using the cyclic prefix and define the cost function by using the two OFDM signal blocks. We show that the cost function can be approximately expressed as a closed form cosine function. The approximated cosine function can be obtained from three independent cost function values calculated at three different frequency offsets. In the proposed method, the frequency offset can be estimated by calculating a frequency offset minimizing the approximated cosine function without searching all the frequency offset range. Unlike the conventional methods such as MUSIC method, the accuracy of the proposed method is independent of the searching resolution since the closed form solution exists. The computer simulation shows that the performance of the proposed method is superior to those of the MUSIC and the oversampling method.