• Biomolecules & Therapeutics
• /
• v.8 no.4
• /
• pp.293-298
• /
• 2000

Bergenin is a C-glucoside of 4-O-methyl gallic acid that has been isolated from the cortex of Mallotus japonicus (Euphorbiaceae). Acetylbergenin was synthesized by acetylation from bergenin to increase lipophilic and physiological activities. The therapeutic effects of bergenin and acetylbergenin were evaluated against carbon tetrachloride ($CCl_4$)-induced hepatotoxicity in rats. Bergenin and acetylbergenin were administered orally once daily for successive 5 days, after the intraperitoneal injection of a mixture 0.5 m1/kg of $CCl_4$ in olive oil (1:1). The substantially elevated serum enzymatic activities of alanine/aspartate aminotransferase, sorbitol dehydrogenase and ${\gamma}$-glutamyltransferase induced by $CCl_4$ were restored towards normalization by posttreatment with bergenin and acetylbergenin. Bergenin and acetylbergenin also significantly prevented the elevation of hepatic malondialdehyde formation and depletion of glutathione content induced by $CCl_4$ in a dose dependent fashion. In addition, the decreased activities of glutathione S-transferase and glutathione reductase were restored towards normalization. These results suggest that therapeutic effects of bergenin and acetylbergenin may be related complex mechanisms that involve prevention of lipid peroxidation and preservation of hepatic GSH. The results of this study clearly indicate that bergenin and acetylbergenin have potent hepatothrapeutic action against $CCl_4$-induced hepatotoxicity in rats. In addition, acetylbergenin 50 mgHg showed almost the same levels of hepatoprotective activity as those of bergenin 100 mgAg, indicating the fact that lipophilic acetylbergenin is more effective in the hepatoprotective action against $CCl_4$ than bergenin.

• Korean Journal of Acupuncture
• /
• v.23 no.2
• /
• pp.105-111
• /
• 2006

Objectives: We investigated the effect of electroacupuncture on epileptic rat model and its underlying mechanisms on suppression of the epilepsy. Methods: It was used pentylenetetrazol $(35{\sim}40\;mg/kg.\;i.p)$ induced epileptic rat model and square wave electrical stimulations (5 mA, 5, 40 or 80 Hz frequency) was applied to acupoints on 'Dazhui' and 'Taichong' for 30min. Results: Electroacupuncture suppressed spikes and slow waves of EEG due to the epileptic condition. Out of electroacupuncture, a high frequency of 80Hz had a better effect for suppress epileptic EEG wave. Conclusions: Electroacupuncture can markedly reduce the excitability of cerebral cortex and strengthen the inhibitory process, checking epilepsy wave. Some intrathalamic nuclei have a promoting or inhibiting effect on epileptic EEG wave. This experimental study we are proposed to Electro-acupuncture can suppression epileptic rat model and it's scientific mechanisms.

• The Korean Journal of Physiology and Pharmacology
• /
• v.5 no.3
• /
• pp.253-258
• /
• 2001

The present study was aimed to examine whether the expression of renin is associated with that of cyclooxygenase-2 (COX-2) in the kidney. Male Sprague-Dawley rats were made two-kidney, one clip (2K1C) or deoxycorticosterone acetate (DOCA)-salt hypertensive, to stimulate or to inhibit the endogenous renin-angiotensin system, respectively. The expression of renin and COX-2 mRNA was determined in the cortex of the kidney by reverse transcription-polymerase chain reaction. 2K1C hypertensive rats showed an increased expression of renin as well as of COX-2 in the clipped kidney. The expression of renin was decreased in parallel with that of COX-2 in the contralateral non-clipped kidney. Removal of the renal arterial clip reversed the expression of both genes, along with the blood pressure, to the control level. On the other hand, DOCA-salt hypertension was associated with parallel decreases of renin and COX-2 expression. These results indicate that renin and COX-2 genes are coordinately expressed in the kidney.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.1
• /
• pp.179-185
• /
• 2017

Communication technologies hold a significant place in the swarm flight of drones for surveillance, inspection of disasters and calamities, entertainment performances, and drone collaborations. A GCS(ground control station) for the control of drone swarms needs its devoted communication method to control a large number of drones at the same time. General drone controllers control drones by connecting transmitters and drones in 1:1. When such an old communication method is employed to control many drones simultaneously, problems can emerge with the control of many transmitter modules connected to a GCS and frequency interference among them. This study implemented a transmitter controller to control many drones simultaneously with a communication chip of 2.4GHz ISM band and a Cortex M4-based board. It also designed a GCS to control many transmitter controllers via a network. The hierarchical method made it possible to control many more drones. In addition, the problem with frequency interference was resolved by implementing a time- and frequency-sharing method, controlling many drones simultaneously, and adding the frequency hopping feature. If PPM and S.BUS protocol features are added to it, it will be compatible with more diverse transmitters and drones.

• Archives of Plastic Surgery
• /
• v.34 no.4
• /
• pp.535-537
• /
• 2007

Purpose: We experienced a patient with posttraumatic duplication of the sternoclavicular joint causing a protruding deformity, whose major complaint was aesthetic. The patients history, radiologic findings, and surgical treatment are reported. Methods: A 41-year-old bus driver complained a bony prominence at the left medial clavicle, which had developed after a fracture. The patient was annoyed by the protrusion, which was even visible, when he was wearing a pullover. A three dimensional CT scan showed that the medial head was split into two portions, of which the anterior portion was protruding. In general anesthesia the anterior portion of the medial head was excised. Results: The bony prominence was corrected successfully. Follow up three dimensional CT scans showed that the anterior cortex of the clavicle had regenerated completely at the resection line one year after the operation. Conclusion: Surgical interventions for complications after clavicular fracture are usually carried out, only if there is a limitation of function or if it is painful. We report of a patient with posttraumatic bifurcation of the medial clavicular head, most probably caused by malunion. Upon the patient's request, the deformity causing protrusion of the medial clavicular area was successfully resected for cosmetic reasons.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.4
• /
• pp.68-74
• /
• 2003

Kenaf(Hibiscus cannabinus L.) cultivar, Tainung 2, had been grown for 152 days at the experimental farm of Jinju National University, Gajoa-dong, Jinju-si, Kyongnam, Korea. The planting, growth rate, fertilization and structural characteristics as well as the cultivation and growth characteristics of kenaf, and the product usage were investigated. The narrowest diameter at kenaf bottom was 10 mm, the widest 42 mm and the average about 28 mm, and the shortest height 150 cm, the tallest 480 cm and the average about 350 cm. The weight of a core fraction was 68.1％ and a bast fraction 31.9％. The weight ratio of core material to bast fiber was 2.31. The weight ratio of dry stem was 73.5％ and that of leaves 26.5％. The weight of dry plant produced in 1 $m^2$ was 1,467 g, and about 1,052 g of stem could be used for the commercial purpose, The application of fertilizers resulted in the increase of the growth rate of the diameter at plant bottom and the height. Bast fiber, phloem ray and cortex parenchyma cell were observed in bast, and vessel, wood fiber and ray in core.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.6
• /
• pp.475-479
• /
• 2021

There are many difficulties in the applications of smart manufacturing technology in the era of the 4th industrial revolution. In this paper, a test bed was built to aim for acquiring smart manufacturing technology, and the test bed was designed to acquire basic technologies necessary for PLC (Programmable Logic Controller), HMI, Internet of Things (IoT), artificial intelligence (AI) and big data. By building a vehicle maintenance lift that can be easily accessed by the general public, PLC control technology and HMI drawing technology can be acquired, and by using cloud services, workers can respond to emergencies and alarms regardless of time and space. In addition, by managing and monitoring data for smart manufacturing, it is possible to acquire basic technologies necessary for embedded systems, the Internet of Things, artificial intelligence, and big data. It is expected that the improvement of smart manufacturing technology capability according to the results of this study will contribute to the effect of creating added value according to the applications of smart manufacturing technology in the future.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.5
• /
• pp.509-515
• /
• 2022

As the 4th industrial revolution based on ICT is progressing in the manufacturing field, interest in building smart factories that can be flexible and customized according to customer demand is increasing. To this end, it is necessary to maximize the efficiency of factory by performing an automated process in real time through a network communication between engineers and equipment to be able to link the established IT system. It is also necessary to collect and store real-time data from heterogeneous facilities and to analyze and visualize a vast amount of data to utilize necessary information. Therefore, in this study, four types of controllers such as PLC, Arduino, Raspberry Pi, and embedded system, which are generally used to build a smart factory that can connect technologies such as artificial intelligence (AI), Internet of Things (IoT), and big data, are configured. This study was conducted for the development of a program that can collect and store data in real time to visualize and manage information. For communication verification by controller, data communication was implemented and verified with the data log in the program, and 3D monitoring was implemented and verified to check the process status such as planned quantity for each controller, actual quantity, production progress, operation rate, and defect rate.

• Biomolecules & Therapeutics
• /
• v.31 no.2
• /
• pp.148-160
• /
• 2023

Depression is a neuropsychiatric disorder associated with persistent stress and disruption of neuronal function. Persistent stress causes neuronal atrophy, including loss of synapses and reduced size of the hippocampus and prefrontal cortex. These alterations are associated with neural dysfunction, including mood disturbances, cognitive impairment, and behavioral changes. Synaptic plasticity is the fundamental function of neural networks in response to various stimuli and acts by reorganizing neuronal structure, function, and connections from the molecular to the behavioral level. In this review, we describe the alterations in synaptic plasticity as underlying pathological mechanisms for depression in animal models and humans. We further elaborate on the significance of phytochemicals as bioactive agents that can positively modulate stress-induced, aberrant synaptic activity. Bioactive agents, including flavonoids, terpenes, saponins, and lignans, have been reported to upregulate brain-derived neurotrophic factor expression and release, suppress neuronal loss, and activate the relevant signaling pathways, including TrkB, ERK, Akt, and mTOR pathways, resulting in increased spine maturation and synaptic numbers in the neuronal cells and in the brains of stressed animals. In clinical trials, phytochemical usage is regarded as safe and well-tolerated for suppressing stress-related parameters in patients with depression. Thus, intake of phytochemicals with safe and active effects on synaptic plasticity may be a strategy for preventing neuronal damage and alleviating depression in a stressful life.

• Biomedical Science Letters
• /
• v.12 no.2
• /
• pp.81-89
• /
• 2006

The ischemia-responsive 94 gene (irp94) encoding a 94 kDa endoplasmic reticulum resident protein was investigated its molecular properties associated with unfoled protein responses. First, the expression of irp94 mRNA was tested after the reperfusion of the transient forebrain ischemia induction at the central nervous system in three Mongolian gerbils. Second, irp94 expression in PC12 cells, which are derived from transplantable rat pheochromocytoma cultured in the DMEM media, was tested at transcriptional and translational levels. The half life of irp94 mRNA was also determined In PC12 cells. Last, the changes of irp94 mRNA expression were investigated by the addition of various ER stress inducible chemicals (A23187, BFA, tunicamycin, DTT and $H_2O_2$) and proteasome inhibitors, and heat shock. High level expression of irp94 mRNA was detected after 3 hours reperfusion in the both sites of the cerebral cortex and hippocampus of the gerbil brain. The main regulation of irp94 mRNA expression in PC 12 cells was determined at the transcriptional level. The half life of irp94 mRNA in PC12 cells was approximately 5 hours after the initial translation. The remarkable expression of irp94 mRNA was detected by the treatment of tunicamycin, which blocks glycosylation of newly synthesized polypeptides, and $H_2O_2$, which induces apoptosis. When PC12 cells were treated with the cytosol proteasome inhibitors such as ALLN (N-acetyl-leucyl-norleucinal) and MG 132 (methylguanidine), irp94 mRNA expression was increased. These results indicate that expression of irp94 was induced by ER stress including oxidation condition and glycosylation blocking in proteins. Expression of irp94 was increased when the cells were chased after heat shock, suggesting that irp94 may be involved in recovery rather than protection against ER stresses. In addition, irp94 expression was remarkably increased when cytosol proteasomes were inhibited by ALLN and MG 132, suggesting that irp94 plays an important role for maintaining the ERAD (endoplasmic reticulum associated degradation) function.