• 한국강구조학회 논문집
• /
• 제23권2호
• /
• pp.221-228
• /
• 2011

강 판형교는 높은 세장비 때문에 좌굴이 설계의 주요 변수이다. 본 연구의 목적은 I 형 플레이트 거더와 파형 복부판을 갖는 플레이트 거더의 좌굴거동을 분석하고, 파형 복부판을 갖는 플레이트 거더의 이점을 조사하는 것이다. 파형 복부판 깊이의 변화, 복부판의 두께 변화 그리고 하중조건의 변화에 따라 다양한 파라미터 연구를 수행하였다. 연구의 결과로서 파형 복부판을 갖는 플레이트 거더의 좌굴강도가 I 형 플레이트 거더에 비해서 좌굴강도에 있어서 46%~417% 더 효과적이며, 파형 복부판을 갖는 플레이트 거더의 적절한 파형각도는 ${\theta}=15^{\circ}{\sim}22^{\circ}$로 나타났다.

• 한국공간구조학회논문집
• /
• 제12권4호
• /
• pp.47-56
• /
• 2012

This paper describes the structural design and optimization of sinusoidally corrugated web girder by using EUROCODE (EN 1993-1-5). The optimum design methodology and characteristics of the optimal cross-section are discussed. We investigate a shear buckling and the concerned standards for corrugated web and explain the equations to obtain a critical stress according to buckling type. In order to perform optimization, we consider an objective function as minimum weight of the girder and use the constraint functions as slenderness ratio and stresses of flanges as well as corrugated web and deflection. Genetic Algorithm is adopted to search a global optimum solution for this mathematical model. For numerical example, the clamped girder under the concentrated load is considered, while the optimum cross-sectional area and design variables are analyzed. From the results of the adopted example, the optimum design program of the sinusoidally corrugated web girder is able to find the suitable solution which satisfied a condition subject to constraint functions. The optimum design shows the tendency to decrease the cross-sectional area with the yielding strength increase and increase the areas with load increase. Moreover, the corrugated web thickness shows a stable increase concerning the load.

• Steel and Composite Structures
• /
• 제28권1호
• /
• pp.51-61
• /
• 2018

A new I-girder consisted of top concrete-filled tubular flange and corrugated web has been proved to have high resistance to both global buckling of the entire girder and local buckling of the web. This study carries out theoretical analysis and experimental tests for this new I-girder to investigate the stress distribution in the flanges and in the corrugated web. Based on some reasonable assumptions, theoretical equations for calculating the normal stress in the flanges and the shear stress in the corrugated web are presented. To verify the accuracy of the presented equations, experimental tests on two specimens were carried out, and the experimental results of stress distribution were used to assess the theoretical prediction. Comparison between the two results indicates that the presented theoretical equations have enough accuracy for calculating the stress in the new I-girder, and thus they can be used reliably in the design stage.

• Steel and Composite Structures
• /
• 제22권6호
• /
• pp.1465-1486
• /
• 2016

Conventional plate I-girders are sensitive to local buckling of the web when they are subjected mainly to shear action because the slenderness of the web in out-of-plane direction is much bigger. The local buckling of the web can also cause the distorsion of the plate flange under compression as a thin-walled plate has very low torsional stiffness due to its open section. A new I-girder consisted of corrugated web, a concrete-filled rectangular tubular flange under compression and a plate flange under tension is presented to improve its resistance to local buckling of the web and distorsion of the flat plate flange under compression. Experimental tests on a conventional plate I-girder and a new presented I-girder are conducted to study the failure process and the failure mechanisms of the two specimens. Strain developments at some critical positions, load-lateral displacement curves, and load-deflection curves of the two specimens have all be measured and analyzed. Based on these results, the failure mechanisms of the two kinds of I-girders are discussed.

• Steel and Composite Structures
• /
• 제18권1호
• /
• pp.255-271
• /
• 2015

This paper presents the natural frequency of a composite girder with corrugated steel web (CGCSW). A corrugated steel web has negligible in-plane axial stiffness, due to the unique characteristic of corrugated steel webs, which is called the accordion effect. Thus, the corrugated steel web only resists shear force. Further, the shear buckling resistance and out-of-plane stiffness of the web can be enhanced by using a corrugated steel web, since the inclined panels serve as transverse stiffeners. To take these advantages, the corrugated steel web has been used as an alternative to the conventional pre-stressed concrete girder. However, studies about the dynamic characteristics, such as the natural frequency of a CGCSW, have not been sufficiently reported, and it is expected that the natural frequency of a CGCSW is different from that of a composite girder with flat web due to the unique characteristic of the corrugated steel web. In this study, the natural frequency of a CGCSW was investigated through a series of experimental studies and finite element analysis. An experimental study was conducted to evaluate the natural frequency of CGCSW, and the results were compared with those from finite element analysis for verification purpose. A parametric study was then performed to investigate the effect of the geometric characteristics of the corrugated steel web on the natural frequency of the CGCSW. Finally, a simplified beam model to predict the natural frequency of a CGCSW was suggested.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.47-48
• /
• 2009

본 연구는 파형복부 PSC 거더의 사용성 개선과 프리스트레싱 효율성의 장점을 동시에 얻을 수 있도록 좌굴 특성을 고려한 부분 파형강판을 복부에 설치한 PSC 거더를 제안하고 정적재하 실험을 통하여 제안된 부분파형 PSC 거더의 거동특성을 평가하였다.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.287-290
• /
• 2008

Resistance to lateral torsional buckling of steel I-girder (open section) is a very important design requirement. But, most studies of steel I-girder with corrugated webs were invested in shear behavior. Untill now, most studies about Lateral torsional buckling of I-girder with corrugated webs have been based on Lindner.J's study (Lateral torsional buckling of beamswith trapezoidally corrugated webs,1990). the study includes that the pure torsional constant of I-girder with corrugated webs $J_{cor}$ doesn't different from that of I-girder with flat webs. This paper pesents pure torsional constant of I-girder with corrugated webs by using finite element anaysis.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.585-588
• /
• 2008

Resistance to lateral torsional buckling of steel I-girder (open section) is a very important design requirement. But, most studies of steel I-girder with corrugated webs were invested in shear behavior. Until now, most studies about Lateral torsional buckling of I-girder with corrugated webs have been based on Lindner.J's study. the study includes that the pure torsional constant of I-girder with corrugated webs doesn't different from that of I-girder with flat webs. This paper pesents pure torsional constant I-girder with sinusoidally corrugated webs by using finite element analysis.

• 한국강구조학회 논문집
• /
• 제27권6호
• /
• pp.503-511
• /
• 2015

강구조물에서 장스팬의 경우, 일반적으로 스티프너로 보강된 플레이트거더를 많이 사용하는데, 보(girder)의 춤이 크고 웨브의 폭이 좁은 단면을 선택하는 경우는, 웨브가 세장해져서 면외좌굴이 문제가 된다. 이를 해결하기 위한 방안으로, 이 연구에서는 국내에서도 공장, 창고건물을 중심으로 많이 사용되고 있는, 춤이 큰 주름 웨브 보를 휨재로 사용했을 때, 그 적용가능성을 판단하기 위하여, 그 선행작업으로, 주름 웨브(파형, Sinusoidal)를 가진 H형 단면보의 재하실험을 실시하였다. 평판웨브 P-4.5실험체에 비해서 주름웨브 CP-2.3실험체는 최대 휨내력은 12% 부족했지만, CP-3.2 실험체는 약 24% 내력상승이 나타났다. 이는 주름웨브 보는 평판보보다 불리한 판폭두께비를 가진 경우에도 충분한 내력확보가 가능함을 의미한다. 그리고 유로코드(EN 1993-1-5)에 의하여 산정된 휨 내력 및 전단내력을, 재하실험에 의한 휨내력과 KBC2009에 의한 전단내력을 비교하였다. 유로코드에서는 주름웨브의 판두께 증가는 휨성능 향상에 도움이 안 되며, 전단성능은 웨브 판두께와 주름 웨브의 형상에 민감함을 알았다.

• 한국철도학회논문집
• /
• 제10권5호
• /
• pp.600-606
• /
• 2007

복부 파형강판 거더와 복합 트러스 거더의 정적 및 동적거동 특성을 분석하기 위해 3차원 유한요소해석을 수행하였고, 이 결과를 등가보 이론에 의한 해석결과와 비교하였다. 등가보 이론은 트러스 구조의 모든 단면제원을 등가의 보로 치환함과 동시에 전단계수 등의 단면특성을 고려한 이론이다. 등가보 이론 적용 시 복부 파형강판 거더의 전단계수는 복부 단면적에 대한 전체 단면적의 비로 산정하였고, 복합 트러스 거더의 전단계수는 Abdel의 계산식을 사용하여 산정하였다. 정적해석 및 자유진동해석 결과 3차원 유한요소모델을 이용한 해석결과가 전단변형을 고려한 등가보 이론에 의한 해석결과와 잘 일치하였다.