• 제목/요약/키워드: Corrosion compounds

검색결과 147건 처리시간 0.018초

Corrosion Protection from Inhibitors and Inhibitor Combinations Delivered by Synthetic Ion Exchange Compound Pigments in Organic Coatings

  • Chrisanti, S.;Ralston, K.A.;Buchheit, R.G.
    • Corrosion Science and Technology
    • /
    • 제7권4호
    • /
    • pp.212-218
    • /
    • 2008
  • Inorganic ion exchange compounds (IECs) including hydrotalcites and bentonite clays are a well known classes of layered mixed metal hydroxides or silicates that demonstrate ion exchange properties. These compounds have a range of applications from water purification to catalyst supports. The use of synthetic versions of these compounds as environmentally friendly additives to paints for storage and release of inhibitors is a new and emerging application. In this paper, the general concept of storage and release of inhibiting ions from IEC-based particulate pigments added to organic coatings is presented. The unique aspects of the IEC structure and the ion exchange phenomenon that form the basis of the storage and release characteristic are illustrated in two examples comprising an anion exchanging hydrotalcite compound and a cation exchanging bentonite compound. Examples of the levels of corrosion protection imparted by use of these types of pigments in organic coatings applied to aluminum alloy substrates is shown. How corrosion inhibition translates to corrosion protection during accelerated exposure testing by organic coatings containing these compounds is also presented.

철제유물 부식인자에 대한 부식양상 및 부식화합물 실험 연구 (An Experimental Study of Corrosion Characteristics and Compounds by Corrosion Factors in Iron Artifacts)

  • 박형호;이재성;유재은
    • 보존과학연구
    • /
    • 통권33호
    • /
    • pp.33-43
    • /
    • 2012
  • 본 연구는 부식인자에 따른 부식현상을 관찰하고 구성성분과 결정구조 분석을 통하여 철제유물에 영향을 미치는 부식위험인자를 확인하고자 하였다. 부식인자가 녹아있는 HCl, $HNO_3$, $H_2SO_4$, $H_2O$ 용액에 순수한 Fe powder(99%)를 침적시켜 부식화합물을 채취하였다. 채취된 부식화합물의 색상과 형태를 파악하기 위하여 실체 현미경 관찰을 실시하였으며 부식인자와 성장성을 확인하기 위하여 SEM-EDS분석을 실시하였다. 생성된 부식화합물의 결정구조와 조성을 알아보기 위하여 XRD, Raman 분석을 실시하였다. 실험결과 산성환경에서의 부식 속도가 빠르며 HCl, $H_2SO_4$의 부식이 $HNO_3$보다 크게 나타났다. HCl의 부식화합물은 $Cl^-$이온의 영향을 받아 침상형, 밤송이형태로 성장하였으며 X-선 회절분석과 Raman 분석결과 Goethite와 Lepidocrocite가 검출되었다. $H_2SO_4$의 부식화합물은 S이온의 영향을 받아 가느다란 침상형, 원기둥형태로 성장하였으며 X-선 회절분석과 Raman 분석결과 Goethite와 Lepidocrocite가 검출되었다. $HNO_3$의 부식화합물은 O이온의 영향을 받아 구상형, 판상형태로 성장하였으며 X-선 회절분석과 Raman 분석결과 Magnetite와 Lepidocrocite가 검출되었다. $H_2O$의 부식화합물은 O이온의 영향을 받아 구상형, 판상형태로 성장하였지만 대부분 구상형으로 관찰되며 X-선 회절분석과 Raman 분석결과 부식화합물이 검출되지 않았다. 부식인자에 따른 부식양상과 부식화합물이 다양하게 나타난다는 사실을 알게 되었다.

  • PDF

Corrosion in Oil well Stimulation Processes Caused by Different Chelating Agents Based on EDTA Compounds

  • Calderon, J.A.;Vasquez, F.A.;Arbelaez, L.;Carreno, J.A.
    • Corrosion Science and Technology
    • /
    • 제16권2호
    • /
    • pp.59-63
    • /
    • 2017
  • Chelating solutions can be damaged by strong acids during oil production. To design effective corrosion inhibitors and other alternatives for corrosion control, it is important to understand not only the behavior of the system under operating condition but also the kinetics of electrochemical reactions during the corrosion process. In this study, the electrochemical behaviors of P-110 steel in aqueous fluids based on ethylenediaminetetraacetic acid (EDTA) compounds under various temperatures and hydrodynamic regime conditions were assessed. Electrochemical measurements were conducted using rotating disc electrodes manufactured. Electrolytes were prepared using aqueous compounds of EDTA like diammonium salt, disodium salt, and tetrasodium salt. Potentiodynamic polarization, electrochemical impedance, and mass loss tests were performed in order to assess the corrosion kinetic in electrolytes. Hydrodynamic effects were observed only in the cathodic polarization curve. This proves that hydrodynamic regime plays an important role in the corrosion of steel mainly in disodium and diammonium EDTA solutions. Two cathodic reactions controlled the corrosion process. However, oxygen level and pH of the electrolyte played the most important role in metal corrosion. Corrosion rates in those fluids were decreased drastically when oxygen concentration was reduced.

Electrochemical Adsorption Properties and Inhibition of Zinc Corrosion by Two Chromones in Sulfuric Acid Solutions

  • Fouda, Abd El-Aziz S.;Nazeer, Ahmed Abdel;Saber, Ahmed
    • 대한화학회지
    • /
    • 제58권2호
    • /
    • pp.160-168
    • /
    • 2014
  • The electrochemical behavior and corrosion inhibition of zinc in 0.5 M $H_2SO_4$ in the absence and presence of some chromones has been investigated using weight loss, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and electrochemical frequency modulation (EFM) techniques. The presence of these investigated compounds in the corrosive solutions decrease the weight loss, the corrosion current density, and double layer capacitance but increases the charge transfer resistance. Polarization studies were carried out at room temperature, and showed that all the studied compounds act as mixed type inhibitors with a slight predominance of cathodic character. The effect of temperature on corrosion inhibition has been studied and the thermodynamic activation and adsorption parameters were determined and discussed. The adsorption of the investigated compounds on zinc was found to obey Langmuir adsorption isotherm.

Effects of Corrosion Inhibitor on Corrosion of Al-based Alloys in Ethylene Glycol-Water Coolant Environment

  • Gwang-Soo Choi;Young-Man Kim;Chan-Jin Park
    • Corrosion Science and Technology
    • /
    • 제22권5호
    • /
    • pp.305-313
    • /
    • 2023
  • The objective of this study was to investigate the effectiveness of sodium dodecyl benzene sulfonate (SDBS) as a corrosion inhibitor on the pitting corrosion behavior of aluminum alloys used in electric vehicle battery cooling systems within a mixture of ethylene glycol and water (EG-W) coolant. Potentiodynamic polarization testing revealed unstable passive film formation on the aluminum alloys in the absence of SDBS. However, the addition of SDBS resulted in a robust passive film, enhancing the pitting corrosion resistance across all examined alloys. Pitting corrosion was predominantly observed near intermetallic compounds in the presence of Cl? ions, which was attributed to galvanic interactions. Among tested alloys, A1040 demonstrated superior resistance due to its lower areal fraction of precipitates and donor density. The incorporation of SDBS inhibitors mitigated the overall pitting corrosion process by hindering Cl? ion penetration. These findings suggest that SDBS can significantly improve pitting corrosion resistance in aluminum alloys employed in battery coolant environments.

Hot-dipped Al-Mg-Si Coating Steel - Its Structure, Electrochemical and Mechanical Properties -

  • Tsuru, Tooru
    • Corrosion Science and Technology
    • /
    • 제9권6호
    • /
    • pp.233-238
    • /
    • 2010
  • Hot-dipped Al-Mg-Si coatings to alternate Zn and Zn alloy coatings for steel were examined on metallographic structure, corrosion resistance, sacrificial ability, formation and growth of inter-metallic compounds, and mechanical properties. Near the eutectic composition of quasi-binary system of Al-$Mg_2Si$, very fine eutectic structure of ${\alpha}$-Al and $Mg_2Si$ was obtained and it showed excellent corrosion resistivity and sacrificial ability for a steel in sodium chloride solutions. Formation and growth of Al-Fe inter-metallic compounds at the interface of substrate steel and coated layer was suppressed by addition of Si. The inter-metallic compounds layer was usually brittle, however, the coating layer did not peel off as long as the thickness of the inter-metallic compounds layer was small enough. During sacrificial protection of a steel, amount of hydrogen into the steel was more than ten times smaller than that of Zn coated steel, suggesting to prevent hydrogen embrittlement. Al-Mg-Si coating is expected to apply for several kinds of high strength steels.

철제유물 부식화합물 분석의 표준데이터 확보를 위한 라만 분광법 적용성 연구 (Application Study of Raman Micro-Spectroscopy for Analysis on Corrosion Compound of Iron Artifacts)

  • 박형호;이재성;유재은
    • 보존과학연구
    • /
    • 통권32호
    • /
    • pp.89-98
    • /
    • 2011
  • 철 부식화합물은 부식인자들과 함께 다양한 결정구조를 가지며 2가지 이상의 부식화합물들이 혼합되어 존재하므로 각각의 특성을 밝혀내기가 매우 어렵다. 본 연구는 표준 철 부식물을 대상으로 Raman Micro-Spectroscopy 분석을 실시하여 표준 Raman Data 확보를 목적으로 수행하였다. 표준 철 부식물에 대한 신뢰성을 향상시키기 위하여 SEM-EDS 분석과 XRD 분석을 추가로 실시하였다. SEM-EDS 분석결과 모두 표준 철 부식물의 구성성분과 일치하였으나 Goethite의 경우 철 이외의 비철금속 성분이 검출되었다. XRD 분석 결과 모두 표준 철 부식물의 구조와 일치 하였으나 Iron sulfate($FeSO_4{\cdot}6H_2O$)의 경우 Rozenite($FeSO_4{\cdot}4H_2O$)로 확인되었다. Raman Micro-Spectroscopy 분석결과 기존에 연구되었던 수산화철, 산화철의 Wavenumber에서 새로운 peak이 발견되었는데 이는 레이저 파장의 변화에 따른 것으로 사료 된다. 염화철과 황산철에서 Wavenumber가 새롭게 확인되어 표준 Raman Data 8건을 확보하였다. Raman Micro-Spectroscopy는 적은양의 시료를 이용하여 물질의 특성과 구조를 비교적 간단하게 분석 할 수 있어 미세한 부분이나 시료의 양이 한정된 문화재에 활용도가 높을 것으로 판단된다.

  • PDF

The Inhibition of C-steel Corrosion in H3PO4 Solution by Some Furfural Hydrazone Derivatives

  • Fouda, A.S.;Badr, G.E.;El-Haddad, M.N.
    • 대한화학회지
    • /
    • 제52권2호
    • /
    • pp.124-132
    • /
    • 2008
  • H3SO4(M: 몰농도) 용액에서 탄소강의 부식방지제로 Furfural hydrazone 유도체의 효과를 질량손실법 및 정전류극성법을 사용해 연구하였다. 이들 유도체 존재하에서 탄소강의 부식속도가 급격히 감소함을 관찰하였다. 이 연구로부터 부식방지효율은 부식방지제 농도가 증가함에 따라 증가하였고 I와 SCN을 첨가하면 부식방지효율은 더욱 증가되었다. 질량손실법을 사용해 5×10-6 M의 유도체가 있을 때와 없을 때 30-60oC 사이에서 탄소강 부식에 미치는 온도 효과를 보았다. 부식과정에 대한 활성화에너지(Ea*)와 다른 열역학적 변수들을 계산하였고 이들에 대해 논의하였다. 정전류극성법을 통해 유도체들이 혼합형 방지제로 작용함을 알았고 외부전류를 흘려주었을 때 음극은 더욱 분극되었다. 3M H3SO4 용액에서 탄소강 표면에 이들 유도체들의 흡착은 Frumkin의 흡착등온을 따랐다. 이들 유도체들의 화학구조를 통해 부식방지 메커니즘을 설명하였다.

A New Technology of Anti-corrosive of Metals in Atmospheric Environment

  • Chen, Ke Zhong
    • Corrosion Science and Technology
    • /
    • 제2권4호
    • /
    • pp.194-196
    • /
    • 2003
  • In this paper, a newest kind of anti-atmospheric corrosion method is introduced. This method does not adopt organic coating, plastic layer or metal plating, instead it adopts a kind of aqueous emulsion containing numerous tine solid compounds that are absorbed onto the component surface, which play the role of anti-electrochemical corrosion.

The Effect of Imidazole and 2-Methyl Imidazole on the Corrosion of Mild Steel in Phosphoric Acid Solution

  • Chandrasekara, V.;Kannan, K.;Natesan, M.
    • Corrosion Science and Technology
    • /
    • 제4권5호
    • /
    • pp.191-200
    • /
    • 2005
  • Two azole compounds viz., Imidazole (IM) and 2-Methylimidazole (2-MIM) were studied to investigate their inhibiting action on corrosion of mild steel in phosphoric acid ($H_3PO_4$) solution by mass loss and polarization techniques at 302K-333K. It has been found that the inhibition efficiency of the all inhibitors increased with increase in inhibitor concentration and decreases with increasing temperature and also with increase in acid concentrations. The inhibition efficiency of these compounds showed very good inhibition efficiency. At 0.5% of IM and 2-MIM in 1N and 5N phosphoric acid solution at 302K to 333K for 5 hours immersion period, the inhibition efficiency of 2-Methylimidazole found to be higher than Imidazole. The adsorption of these compounds on the mild steel surface from the acids has been found to obey Tempkin's adsorption isotherm. The values of activation energy ($E{\alpha}$) and free energy of adsorption (${\Delta}G{\alpha}ds$) were also calculated. The plots of log $W_f$ against time (days) at 302K give straight line which suggested that it obeys first order kinetics and also calculate the rate constant k and half life time $t_{1/2}$. Surface was analyzed by SEM and FITR spectroscopy.