• Bulletin of the Korean Chemical Society
• /
• v.35 no.12
• /
• pp.3527-3531
• /
• 2014

In this paper, we report thermodynamic and transport properties (diffusion coefficient, viscosity, and thermal conductivity) of diatomic gases ($H_2$, $N_2$, $O_2$, and $Cl_2$) at 273.15 K and 1.00 atm by performing molecular dynamics simulations using Lennard-Jones intermolecular potential and modified Green-Kubo formulas. The results of self-diffusion coefficients of diatomic gases obtained from velocity auto-correlation functions by Green-Kubo relation are in good agreement with those obtained from mean square displacements by Einstein relation. While the results for viscosities of diatomic gases obtained from stress auto-correlation functions underestimate the experimental results, those for thermal conductivities obtained from heat flux auto-correlation functions overestimate the experimental data except $H_2$.

• Kidney Research and Clinical Practice
• /
• v.37 no.4
• /
• pp.373-383
• /
• 2018

Background: Several epidemiologic studies have suggested that the urine sodium excretion (USE) can be estimated in lieu of performing 24-hour urine collection. However, this method has not been verified in patients with chronic kidney disease (CKD) or in an interventional study. The purpose of this study was to evaluate the usefulness of estimating USE in a prospective low-salt diet education cohort (ESPECIAL). Methods: A new formula was developed on the basis of morning fasting urine samples from 228 CKD patients in the ESPECIAL cohort. This formula was compared to the previous four formulas in the prediction of 24-hour USE after treatment with olmesartan and low-salt diet education. Results: Most previously reported formulas had low predictability of the measured USE based on the ESPECIAL cohort. Only the Tanaka formula showed a small but significant bias (9.8 mEq/day, P < 0.05) with a low correlation (r = 0.34). In contrast, a new formula showed improved bias (-0.1 mEq/day) and correlation (r = 0.569) at baseline. This formula demonstrated no significant bias (-1.2 mEq/day) with the same correlation (r = 0.571) after 8 weeks of treatment with olmesartan. Intensive low-salt diet education elicited a significant decrease in the measured USE. However, none of the formulas predicted this change in the measured urine sodium after diet adjustment. Conclusion: We developed a more reliable formula for estimating the USE in CKD patients. Although estimating USE is applicable in an interventional study, it may be unsuitable for estimating the change of individual sodium intake in a low-salt intervention study.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.5
• /
• pp.72-84
• /
• 1998

This paper studies the relationship between assemblability and assembly time. After analyzing characteristic factors of bolts and parts, seven different kinds of assemblability parameters were determined according to assembly process, and assemblability was also evaluated. MTM (Method-Time Measurement) and Work factor methods were used for an estimation of assembly time. It shows the relationship can be found on the basis of characteristic factors of parts and bolts by relational graphs and numerical formulas.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.5 s.54
• /
• pp.39-47
• /
• 2003

A study of the structural strength evaluation on the doubler plate, considering various load cases that were subjected to in-plane and out of plane combined load, has been performed through the systematic evaluation process. In order to estimate the proper static strength of doubler plate for various load cases, elasto-plastic large deflection analysis is introduced, including the contact effect between main plate and doubler. The characteristics of stiffness and strength variation are discussed, based on the results. In order to compare the doubler structure with the original strength of main plate, without doubler, simple formulas for the evaluation of the equivalent flat plate thickness are derived for each load case, respectively, based on the additional series of analysis of flat plate structure. Using these derived equations, the thickness change of an equivalent flat plate is analyzed according to the variation of various design parameters of doubler platesome design guides are suggested in order to maintain the original strength of main plate without doubler reinforcement. Finally, correlation between derived equivalent flat plate formula and the developed buckling strength formulas are discovered, and these relations are formulated for the future development of simple strength evaluation formula of general doubler plate structure.

• Journal of KSNVE
• /
• v.6 no.5
• /
• pp.607-616
• /
• 1996

A combined computational fluid dynamics(CFD)-Kirchhoff method is presented for predicting high-speed impulsive noise generated by a hovering blade. Two types of Kirchhoff integral formula are used; one for the classical linear Kirchhoff formulation and the other for the nonlinear Kirchhoff formulation. An Euler finite difference solver is solved first to obtain the flow field close to the blade, and then this flow field is used as an input to a Kirchhoff formulation to predict the acoustic far-field. These formulas are used at Mach numbers of 0.90 and 0.95 to investigate the effectiveness of the linear and nonlinear Kirchhoff formulas for delocalized flow. During these calculiations, the retarded time equation is also carefully examined, in particular, for the cases of the control surface located outside of the sonic cylinder, where multiple roots are obtained. Predicted results of acoustic far-field pressure with the linear Kirchhoff formulation agree well with experimental data when the control surface is at the certain location(R=1.46), but the correlation is getting worse before or after this specific location of the control surface due to the delocalized nonlinear aerodynamic flow field. Calculations based on the nonlinear Kirchhoff equation using a linear sonic cylinder as a control surface show a reasonable agreement with experimental data in negative amplitudes for both tip Mach numbers of 0.90 and 0.95, except some computational integration problems over a shock. This concliudes that a nonlinear formulation is necessary if the control surface is close to the blade and the flow is delocalized.

• Journal of the Korean Society for information Management
• /
• v.22 no.3 s.57
• /
• pp.213-232
• /
• 2005

The purpose of this study is to determine factors affecting text difficulty and to model objective formulas which measure readability scores. Some readability-related factors such as total number of letters, total number of syllables, total number of unique syllables, total number of sentences and total number of paragraphs were found through correlation analysis. Some regression equations with these factors as their variables were produced through regression analysis. A model estimating readability score from total number of unique syllables was a good formula, while a model with two factors, total number of unique syllables and new syllable occurrence ratio, was a better enhanced one. The readability score represents detailed level so we can recommend students read texts corresponding to their reading levels.

• Journal of the Korean Statistical Society
• /
• v.29 no.1
• /
• pp.81-94
• /
• 2000

For the balanced variance component model, sometimes intraclass correlation coefficient is of interest. If there is little information about the parameter, then the reference prior(Berger and Bernardo, 1992) is widely used. Pettit nd Young(1990) considered a measrue of the effect of a single observation on a logarithmic Bayes factor. However, under such a reference prior, the Bayes factor depends on the ratio of unspecified constants. In order to discard this problem, influence diagnostic measures using the intrinsic Bayes factor(Berger and Pericchi, 1996) is presented. Finally, one simulated dataset is provided which illustrates the methodology with appropriate simulation based computational formulas. In order to overcome the difficult Bayesian computation, MCMC methods, such as Gibbs sampler(Gelfand and Smith, 1990) and Metropolis algorithm, are empolyed.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.252-255
• /
• 2000

In this paper, a fast pseudo-noise (PN) code acquisition with novel adaptive architecture is presented in direct-sequence spread- spectrum (DS-SS) systems. Since an existing acquisition system has a fixed correlation tap size and threshold value, this system cannot adapt to various mobile communication environments and results in a low detection probability or a high false alarm rate and long acquisition time. Therefore, if a correlation tap size and a threshold value can be controlled adaptively according to received signals, problems of ail existing system will be solved. The system parameter varies adaptively by using constant false alarm rate (CFAR) algorithm well known in a field of detection and proposed signal-to-noise ratio (SNR) measurement system. By deriving formulas of the proposed system, the performance is analyzed.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.8
• /
• pp.1371-1374
• /
• 2007

The velocity auto-correlation (VAC) function of liquid argon in the Green-Kubo formula decays quickly within 5 ps to give a well-defined diffusion coefficient because the velocity is the property of each individual particle, whereas the stress (SAC) and heat-flux auto-correlation (HFAC) functions for shear viscosity and thermal conductivity have non-decaying, long-time tails because the stress and heat-flux appear as system properties. This problem can be overcome through N (number of particles)-fold improvement in the statistical accuracy, by considering the stress and the heat-flux of the system as properties of each particle and by deriving new Green-Kubo formulas for shear viscosity and thermal conductivity. The results obtained for the transport coefficients of liquid argon obtained are discussed.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.10
• /
• pp.2931-2936
• /
• 2013

This paper presents results for the calculation of transport properties of noble gases (He, Ne, Ar, Kr, and Xe) at 273.15 K and 1.00 atm using equilibrium molecular dynamics (EMD) simulations through a Lennard-Jones (LJ) intermolecular potential. We have utilized the revised Green-Kubo formulas for the stress (SAC) and the heat-flux auto-correlation (HFAC) functions to estimate the viscosities (${\eta}$) and thermal conductivities (${\lambda}$) of noble gases. The original Green-Kubo formula was employed for diffusion coefficients (D). The results for transport properties (D, ${\eta}$, and ${\lambda}$) of noble gases at 273.15 and 1.00 atm obtained from our EMD simulations are in a good agreement with the rigorous results of the kinetic theory and the experimental data. The radial distribution functions, mean square displacements, and velocity auto-correlation functions of noble gases are remarkably different from those of liquid argon at 94.4 K and 1.374 $g/cm^3$.