• Bulletin of the Korean Chemical Society
• /
• v.28 no.8
• /
• pp.1375-1382
• /
• 2007

A column preconcentration method with pulverized Amberlite XAD-4 loaded with bismuthiol I (BI) has been developed for the determination of trace Cd(II) and Cu(II) in various real samples by flame atomic absorption spectrophotometry. Various experimental conditions, such as the size of XAD-4, adsorption flow rate, amount of bismuthiol I, stirring time for adsorbing bismuthiol I on XAD-4, pH of sample solution, amount of XAD-4- BI, desorption solvent, and desorption flow rate, were optimized. Also, the adsorption capacity and the adsorption rate of Cd(II) and Cu(II) on XAD-4-BI were investigated. The interfering effects of various concomitant ions were investigated, Bi(III), Sn(II) and Fe(III) were found to affect the determination. But the interference by these ions was completely eliminated by adjusting the amount of XAD-4-BI resin to 0.70 g, although the adsorption flow rate was slower. For Cd(II) our proposed technique obtained a dynamic range of 0.5-40 ng mL-1, a correlation coefficient (R2) of 0.9913, and a detection limit of 0.3 ng mL-1. For Cu(II), the corresponding values were 2.0-120 ng mL-1, 0.9921 and 1.02 ng mL-1. To validate this proposed technique, the aqueous samples (stream water, reservoir water, tap water and wastewater), the diluted brass sample and the plastic sample, as real samples, were used. Recovery yields of 91-103% were obtained. These measured data were not different from ICP-MS data at 95% confidence level. Our proposed method was also validated using rice flour CRM (normal, fortified) samples. From the results of our experiment, we found that the technique we present here can be applied to the determination of Cd(II) and Cu(II) in various real samples.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.1
• /
• pp.55-61
• /
• 2008

A real-time three-dimensional vision is a passive system, which would support various applications including collision avoidance, home networks. It is a good alternative of active systems, which are subject to interference in noisy environments. In this paper, we designed a SAD correlator with respect to resource usage for a real-time three-dimensional vision system. Regular structures, linear data flow and abundant parallelism make the correlation algorithm a good candidate for a reconfigurable hardware. We implemented two versions of SAD correlator in HDL and synthesized them to determine resource requirements and performance. From the experiment we show that the SAD correlator fits into reconfigurable hardware in marginal cost and can handle about 30 frames/sec with $640{\times}480$ images.

• Journal of Aerospace System Engineering
• /
• v.11 no.6
• /
• pp.84-91
• /
• 2017

The dynamic characteristics of a ducted fan in hovering condition were investigated. The section properties of the fan blade were calculated, and a simulation model was developed according to the rotor system components. Dynamic analyses were conducted relative to the rotational speed and the collective pitch. The proposed ducted fan system showed less aero-elastic instability within the designated operating ranges. To verify the analytical approach, a rotating test stand of the ducted fan was set up. A functional test of the assembly was carried out to determine the kinematics and interference between components. The non-rotating and rotating normal frequencies were measured by excitation of the collective pitch using hydraulic actuators. The results indicated a correlation between the test equipment and the simulation model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.3B
• /
• pp.297-304
• /
• 2011

MIMO wireless communication embedded systems, and for propagation prediction for indoor and outdoor propagation prediction program incorporates an indoor/outdoor propagation through the simulator can be predicted. This analysis technique developed by the interference between multiple transmitters and a maximum transmission distance issues, the frequency utilization efficiency for a variety of issues, including analysis and prediction becomes possible. Development of the prediction of the conventional methods, but I can consider the environmental characteristics of the ray tracing simulation software to develop and implement an efficient ray tracing, ray tracing techniques and are designed to enable tracked beam analysis of propagation characteristics using information technology by combining the theoretical characteristics of an efficient and well-reflected propagation prediction technique was employed. The frequency of domestic embedded systems, ensure the frequency characteristics and frequency of 3-5GHz band for propagation to investigate the development of local wireless communication technology-based skills needed for securing and jeonpaganseopdeung frequency management techniques to ensure the verification and verified through experiments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4B
• /
• pp.371-377
• /
• 2011

Users of the Information Age, IT usage patterns of the wired broadband information services and various forms of the same quality wireless multimedia services are required. Changes of these times the next-generation mobile communications (IMT-Advanced) has emerged as the necessity of developing its current voice and packet data communications on the move in the high-speed 100Mbps, 1Gbps in stationary and slow data transmission rates up to fixed-mobile convergence based on needed to provide ubiquitous service platform for the realization of IMT-Advanced is the time for preparation. In particular, 3-5GHz band, focused on mobile communications can be used to secure the necessary frequency band relocated and the existing crosstalk analysis methodology developed for the services rendered, and the frequency of such results to obtain new spectrum for IMT-Advanced for the country to secure the frequency characteristics and IMT-Advanced 3-5GHz band for the radio frequency of the characterization techniques necessary to develop a national wireless communication interference and frequency-based technology acquisition and management skills were identified.

• Journal of Biosystems Engineering
• /
• v.20 no.1
• /
• pp.95-103
• /
• 1995

A series of study has been conducted to develop a multi-purpose fruit grader using a black ＆ white image processing system equipped with a 550 nm interference filter. A device and high performance algorithms were developed for sizing and color grading of Fuji apple in the previous study. In this study an emphasis was put on finding correlations between weights of several kinds of fruits and their area fractions(AF), and on compensating the blurring effect upon sizing and color grading by conveying speed of fruit. Also, the effect of orientation and direction of fruit on conveyor during image forming was analyzed to identify any difficulty (or utilizing an automatic fruit feeder. The results are summarized as follows. 1. The correlation coefficients(r) between the weights of fruits and their image sizes were 0.984~0.996 for apples, 0.983~0.990 for peachs, 0.995 for tomato, 0.986 for sweet persimmon and 0.970~0.993 for pears. 2. It was possible to grade fruits by color with the area weighted mean gray values(AWMGV) based on the mean gray valves of direct image and the compensated values of reflected image of a fruit, and also possible to sort fruits by size with AF. Accuracies in sizing and color grading ranged over 81.0% ~95.0% and 82.0% ~89.7% respectively as compared with results from sizing by electronic weight scale and grading by expert. 3. The blurring effect on the sizing and color grading depending on conveying speed was identified and regression equations were derived. 4. It was found that errors in sizing and coloring grading due to the change in direction and orientation of Fuji apple on the conveyor were not significant as far as the stem end of apple keeping upward.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.255-259
• /
• 2003

In this paper, we propose an improved image encryption and decryption method using a virtual image and a joint transform correlator (JTC). The encrypted image is obtained by the Fourier transform of the product of a virtual-phase image and a random-phase image, and a Fourier transform of the decrypting key generated by the proposed phase assignment rule is used as the Fourier decrypting key. Based on the solution, the original image is reconstructed using JTC in the frequency-domain. The proposed method using a virtual image, which does not contain any information from the original image, prevents the possibility of counterfeiting by unauthorized people. And also the auto-correlation terms, which are the drawback of a JTC system, contribute to reconstructing the original image rather than to disturbing its identification. But because phase-only encryptions are sensitive to noise and scratches, phase errors can be generated in fabricating the encrypted image or the Fourier decrypting key so the errors that are responsible for degradation of the quality of the reconstructed image are analyzed and the solution is demonstrated. Computer simulations show the solution, and the proposed method is very useful for JTC architecture.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.5
• /
• pp.428-438
• /
• 2021

For long-range communication in deep water, low carrier frequency is efficient due to a decrease in transmission loss. However, there is a limitation in that the data rate decreases due to a narrow bandwith. In order to increase the data rate in an environment with a limited bandwidth, it is necessary to design a higher-order modulation scheme. This paper analyzes the long-range communication data modulated by higher-order modulation schemes. The long-range communication experiment (23 km ~) was conducted in East Sea in October 2020. During the experiment, a vertical line array was utilized and communication sequences were modulated by Phase Shift Keying (PSK) and Quadrature Amplitude Modulation (QAM) schemes and transmitted by a towed source. In more detail, PSK modulation consists of quadrature PSK and 8PSK, QAM modulation consists of 8QAM and 16QAM. Time reversal processing is applied to mitigate inter-symbol interference by utilizing the correlation between received signals and channel impulse responses. All modulation schemes show successful results at 23 km range, demonstrating the feasibility of higher-order modulation in long-range communication.

• The Journal of the Korea Contents Association
• /
• v.19 no.3
• /
• pp.405-415
• /
• 2019

The purpose of this study was to identify the relationships between perceived stress, ego-resilience, and premenstrual syndrome(PMS) and investigate the factors affecting PMS in female college students. The study participants were 215 female college students in Gyeunggi province. Data were collected from October 10 to November 10, 2017, using self-report questionnaires. Collected data were analyzed using descriptive statistics, Pearson correlation coefficients, and multiple regression analysis. PMS was positively correlated with the perceived stress and negatively correlated with ego-resilience. Eating habits, interference with daily life by menstruation, perceived stress accounted for 44.4% of variance in PMS. Based on these results, it is necessary to develop a management program that integrates psychological factors and lifestyle improvement including dietary habits, as well as efforts to manage menstrual symptoms in order to alleviate the premenstrual syndrome of female college students.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.6
• /
• pp.404-411
• /
• 2018

This paper proposes a dolphin whistle mimicking underwater communication method using FSK (Frequency Shift Keying) and method to improve BER (Bit Error Rate) performance by using multipath gain combining. The proposed method divides whistle sound into short time intervals and transmits FSK modulated signal that ensures orthogonality of the symbol. Multipath gain can be obtained by using characteristic of mimicked signal frequency that varies with time. To demonstrate the performance of the proposed method, computer simulations and lake experiments were conducted. Computer simulation results show that an additional multipath gain is obtained by multipath. From lake experiments, when symbol length is 20 msec and modulation band is 900 Hz, the proposed FSK method with multipath combining gain obtains BER of 0.002, which is better than CSS (Chirp Spread Spectrum) with BER of 0.185. he proposed based on FSK method has higher imitation degree than the CSS method by analyzing mean cross-correlation value in the time - frequency domain of the imitated signal and actual whistle signal.