• Proceedings of the KIEE Conference
• /
• 2000.11b
• /
• pp.368-371
• /
• 2000

Two-stage power factor correction (PFC) converter with a single PWM controller is proposed. It consists of a power factor pre-regulator cascaded by an isolated DC/DC converter as in a conventional two-stage approach. However, a single PWM controller is used as in a single-stage, single-switch PFC approach. This converter gives the goof power factor correction, low line current harmonic distortions, and tight output voltage regulations. This converter also has a high efficiency by employing an soft switching method. The proposed approach has advantages such as high performance over the single-stage approach and low cost over two-stage approach. The experimental results obtained on a 300W (30V/10A) prototype PFC converter are given to verify the effectiveness of the proposed control method.

• ETRI Journal
• /
• v.35 no.6
• /
• pp.1115-1125
• /
• 2013

This paper presents a scheme for geometric correction of projected content for planar and quadratic projection surfaces. The scheme does not require the projection surface to be perfectly quadratic or planar and is therefore suitable for uneven low-cost commercial and home projection surfaces. An approach based on the recursive subdivision of second-order B$\acute{e}$zier patches is proposed for the estimation of projection distortion owing to surface imperfections. Unlike existing schemes, the proposed scheme is completely automatic, requires no prior knowledge of the projection surface, and uses a single uncalibrated camera without requiring any physical markers on the projection surface. Furthermore, the scheme is scalable for geometric calibration of multi-projector setups. The efficacy of the proposed scheme is demonstrated using simulations and via practical experiments on various surfaces. A relative distortion error metric is also introduced that provides a quantitative measure of the suppression of geometric distortions, which occurs as the result of an imperfect projection surface.

• Korean Journal of Geomatics
• /
• v.2 no.1
• /
• pp.83-89
• /
• 2002

The cadastral maps as many as about 750,000 map sheets to cover 34,751,000 parcels of land of Korea, are being digitalized. The problem of shrinkage-expansion of the paper cadastral maps has to be resolved for the new digital maps, where the nodes and vertices of the parcel boundaries are represented by coordinates. The photo coordinate refinement techniques, two dimensional projective transformation and local area transformation as in the reseau grid method, were introduced for this distortion correction. Using the fact that original maps drawn on the plane tables in field from 1910 to 1918 have grid lines and have been preserved well, a strategic flow to apply the refinement techniques to the digital maps with the original maps as controls was developed. To accommodate the presence or absence of the original maps and grid lines, and different scales and sizes of the maps, the strategy was implemented by a computer program package. Various distortions and corrections were simulated and errors were evaluated. The RMS errors in the corrected digital maps were allowable, thus, the method developed in this study was to be applicable for the digital cadastral maps.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.413-413
• /
• 2000

In this paper, we propose a series of calibrations f3r the x-ray three dimensional imaging system. In the developed x-ray system, a three dimensional inner and outer shape of an object can be reconstructed out of two dimensional transmitted x-ray image set, which are acquired by projecting x-ray to the object from different views. To achieve this, a reconstruction algorithm which estimates and updates the three dimensional volume from x-ray images is developed. The algorithm is named as uniform and simultaneous algebraic reconstruction technique(USART) which is an iterative method estimating a 3D volume based on its projected images. In this method, it is assumed that the imaging conditions that are the relative positions between the x-ray sources, object and the image planes are blown. Practically it is not easy to know the three dimensional coordinate of the components of the system, since the x-ray is not visible and the image distortions are present due to the optical components in the system. In this paper, methods of correcting image distortions are present firstly. Then the coordinates of the x-ray systems are calibrated from the x-ray images of the grid pattern. Some experimental results on these calibrations are present and discussed.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.1
• /
• pp.49-57
• /
• 2012

An image reconstruction algorithm is proposed to estimate transmitted original images from images displayed on a video terminal. The proposed algorithm acquires images that are displayed on video terminal screens by using a camera. The transmitted images are then estimated with the acquired images. However, camera-acquired images exhibit geometric and color distortions caused by characteristics of the camera and display devices. We make use of a geometric distortion correction algorithm that exploits homography and color distortions using a weighted-linear model. The experimental results show that the proposed algorithm yields promising estimation performance with respect to the peak signal-to-noise ratio (PSNR). PSNR values of the estimated images with respect to the corresponding original images range from 28-29 dB.

• Geophysics and Geophysical Exploration
• /
• v.11 no.4
• /
• pp.286-301
• /
• 2008

When magnetotelluric (MT) data are obtained in vicinity of the coast, the sea can distort observed MT responses, especially those of deep part of subsurface. We introduce an iterative method to correct the sea effect, based on the previous topographic correction method which removes the distortions due to topographic changes in seafloor MT data. The method first corrects the sea effect in observed MT impedance, and then inverts corrected responses in a model space without the sea. Due to mutual coupling between sea and subsurface structure, the correction and inversion steps are iterated until changes in each result become negligible. The method is validated for 1-D and 2-D structure using synthetic MT data produced by 3-D forward modeling including surrounding seas. In all cases, the method closely recovers the given structure after a few iterations. To test the applicability of the proposed method to field data, we generate synthetic MT data for the Jeju Island whose 1-D conductivity structure is well known, using 3-D forward modeling. The distortions due to the surrounding sea start to appear below the frequency about 1 Hz, and are relatively severe in the electrical field perpendicular to the coastline because of the location of the observation sites. The proposed method successfully eliminates the sea effect after three iterations, and both 1-D and 2-D inversion of corrected responses closely recover the given subsurface structure of the Jeju Island model.

• Investigative Magnetic Resonance Imaging
• /
• v.20 no.4
• /
• pp.215-223
• /
• 2016

Purpose: The management of metal-induced field inhomogeneities is one of the major concerns of distortion-free magnetic resonance images near metallic implants. The recently proposed method called "Slice Encoding for Metal Artifact Correction (SEMAC)" is an effective spin echo pulse sequence of magnetic resonance imaging (MRI) near metallic implants. However, as SEMAC uses the noisy resolved data elements, SEMAC images can have a major problem for improving the signal-to-noise ratio (SNR) without compromising the correction of metal artifacts. To address that issue, this paper presents a novel reconstruction technique for providing an improvement of the SNR in SEMAC images without sacrificing the correction of metal artifacts. Materials and Methods: Low-rank approximation in each coil image is first performed to suppress the noise in the slice direction, because the signal is highly correlated between SEMAC-encoded slices. Secondly, SEMAC images are reconstructed by the best linear unbiased estimator (BLUE), also known as Gauss-Markov or weighted least squares. Noise levels and correlation in the receiver channels are considered for the sake of SNR optimization. To this end, since distorted excitation profiles are sparse, $l_1$ minimization performs well in recovering the sparse distorted excitation profiles and the sparse modeling of our approach offers excellent correction of metal-induced distortions. Results: Three images reconstructed using SEMAC, SEMAC with the conventional two-step noise reduction, and the proposed image denoising for metal MRI exploiting sparsity and low rank approximation algorithm were compared. The proposed algorithm outperformed two methods and produced 119% SNR better than SEMAC and 89% SNR better than SEMAC with the conventional two-step noise reduction. Conclusion: We successfully demonstrated that the proposed, novel algorithm for SEMAC, if compared with conventional de-noising methods, substantially improves SNR and reduces artifacts.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.9
• /
• pp.36-44
• /
• 2015

This paper proposes a low-complexity processor to correct vignetting and barrel distortion for wide-angle cameras. The proposed processor calculates the required correcting factors by employing the piecewise linear approximation so that the hardware complexity can be reduced significantly while maintaining correction quality. In addition, the processor is designed to correct the two distortions concurrently in a singular pipeline, which reduces the overall complexity. The proposed processor is implemented with 18.6K logic gates in a $0.11{\mu}m$ CMOS process and shows the maximum correction speed of 200Mpixels/s for correcting an image of which size is $2048{\times}2048$.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.2
• /
• pp.114-123
• /
• 2014

Vehicle Black Box (Event Data Recorder EDR) only recognizes the general surrounding environments of load. In addition, general EDR is difficult to recognize the images of a sudden illumination change. It appears that the lens is being a severe distortion. Therefore, general EDR does not provide the clues of the circumstances of the accident. To solve this problem, we estimate the value of Normalized Luminance Descriptor(NLD) and Normalized Contrast Descriptor(NCD). Illumination change is corrected using Normalized Image Quality(NIQ). Second, we are corrected lens distortion using model of Field Of View(FOV) based on designed method of fisheye lens. As a result, we propose integration algorithm of two methods that correct distortions of images using each Gamma Correction and Lens Correction in parallel.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.528-532
• /
• 2004

Novel single-stage power factor correction AC/DC converter with low DC link voltage using new magnetic feedback technique is proposed in this paper. The Proposed converter has high power factor, tight output voltage regulation and low link capacitor voltage less than 450V for all the load range through the universal input line. This converter has also no dead-zone in the input current, which is seen in the conventional converter using the previous magnetic feedback technique. In this paper, the analysis of operations and features of the proposed converter is provided, and the experimental results of 90W-prototype shows the low harmonic distortions satisfied with EN 61000-3-2 Class D, high power factor and low link voltage less than 450V.