• Nuclear Engineering and Technology
• /
• v.42 no.6
• /
• pp.670-679
• /
• 2010

In this paper, a new approach using a pixel-based correction method was developed to fix the non-uniform responses of flat-bed type scanners used for radiochromic film dosimetry. In order to validate the method's performance, two cases were tested: the first consisted of simple dose distributions delivered by a single port; the second was a complicated dose distribution composed of multiple beams. In the case of the simple individual dose condition, ten different doses, from 8.3 cGy to 307.1 cGy, were measured, horizontal profiles were analyzed using the pixel-based correcton method and compared with results measured by an ionization chamber and results corrected using the existing correction method. A complicated inverse pyramid dose distribution was made by piling up four different field shapes, which were measured with GAFCHROMIC$^{(R)}$EBT film and compared with the Monte Carlo calculation; as well as the dose distribution corrected using a conventional method. The results showed that a pixel-based correction method reduced dose difference from the reference measurement down to 1% in the flat dose distribution region or 2 mm in a steep dose gradient region compared to the reference data, which were ionization chamber measurement data for simple cases and the MC computed data for the complicated case, with an exception for very low doses of less than about 10 cGy in the simple case. Therefore, the pixel-based scanner correction method is expected to enhance the accuracy of GAFCHROMIC$^{(R)}$EBT film dosimetry, which is a widely used tool for two-dimensional dosimetry.

• Current Optics and Photonics
• /
• v.5 no.1
• /
• pp.77-77
• /
• 2021

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.4
• /
• pp.63-70
• /
• 2014

Method a target estimation in spatial are mobile wireless communication using network cell and GPS. It have much error that mobile wireless communication depend on cell size. GPS method can't find a target in shadow and inner area. In this paper, we estimate a target as direction of arrival method using adaptive array antenna system. Adaptive array antenna system can obtain desired signal to remove other signal This paper studied digital beamforming method in order to estimation a target. Proposed method is modified optimum weight and antenna error correction to estimation an optimal receive signal. Digital beamforming method decided a signal phase and amplitude from received signal on array antenna element. But if it is not to do error correction of received signal, system performance have decreased. Firstly, we proposed modified optimum weight in order to finding desired target. Secondly, we are error correction of antenna incident signals by optimal weight before digital beamforming method. Thirdly, throughly simulation, we showed that system performance of proposed method compare proposal method with general method. It have improved resolution of estimation target to good performance more proposed method than general method.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.4
• /
• pp.167-175
• /
• 2013

This study is the process of making high-definition TV broadcast color correction affects the end result comparison is focus on implement through study. In the production process and the impact on the color Correction in the video as an study for UHD, 4K, 6K video production workflow improvement of an effective program in the present and time and cost in the post production process, color correction for the final video through the production and overcome the failure of further in-efficient color correction study will help you to solve the problem. This study is the color changes over the course of the final video to see how much influence color correction of post-production. Color correction using a program of courses in Visual quality, regularly presented the possibility to retain and make on high definition video production post-production process for color correction method is utilized as the basis of study.

• The Mathematical Education
• /
• v.49 no.2
• /
• pp.161-174
• /
• 2010

The purpose of the study is to analyze various types of errors appeared in true-false proof problems of matrix and to find out correction method. In order to achieve this purpose, error test was conducted to the subject of 87 second grade students who were chosen from D high schoool. It was shown from this test that the most frequent error type was caused by the lack of understanding about concepts and essential facts of matrix(35.3%), and then caused by the invalid logically reasoning (27.4%), and then caused by the misusing conditions(18.7%). Through three hours of correction lessons with 5 students, the following correction teaching method was proposed. First, it is stressed that the operation rules and properties satisfied in real number system can not be applied in matrix. Second, it is taught that the analytical proof method and the reductio ad absurdum method are useful in the proof problem of matrix. Third, it is explained that the counter example of E=$\begin{pmatrix}1\;0\\0\;1 \end{pmatrix}$, -E should be found in proof of the false statement. Fourth, it is taught that the determinant condition should be checked for the existence of the inverse matrix.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.25 no.1
• /
• pp.11-20
• /
• 2021

The seismic deformation method is conventionally used as a seismic design for a multi-utility tunnel in Korea. In the seismic deformation method, the soil ground's natural period is one of the most critical factors for calculating the ground displacement using cosine functions. Correction factors for the natural period and shear wave velocity have been used to consider the non-linearity of dynamic soil properties. However, the correction factors have been issued because the correction factors have not been sufficiently studied to consider Korea's regional conditions. This paper aims to evaluate the natural periods for the seismic deformation method considering Korea's ground conditions. Ground response analysis was performed using seven real earthquake records on twelve sites with different soil conditions where actual multi-utility tunnels are installed. As a result, natural periods of the sites were analyzed and new correction factors were proposed according to seismic performance and Korea's regional conditions.

• Journal of Power Electronics
• /
• v.5 no.1
• /
• pp.62-66
• /
• 2005

A simple fault correction method for rotor position detection of a brushless DC(BLDC) motor with trapezoidal back EMF(electromotive force) using a Hall effect latch unit is presented. The reason why the Hall effect latch unit does not operate properly during the startup of a BLDC motor is thoroughly explained. To solve this problem, a simple code change method and its hardware implementation issues are proposed and discussed.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.15 no.1
• /
• pp.41-55
• /
• 1997

We examine various digital halftoning technique and their application to printings. Three such technique are the error diffusion, cluster dither and disperse dither method. This paper describes a new tone correction halftone method to compensate dot gain. Input digital level are transformed by tone correction characteristics. The function of tone correction are solved from the printer response characteristic. The experimental results show that the proposed method is useful and valid.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.598-601
• /
• 2005

Z-correction is new method to be used when measuring pattern registration of photomasks. The method is based on measurement of the plate profile in the Zaxis and takes into account the impact on the registration deviations caused by plate support, contamination as well as the photomask flatness itself. Z-correction further facilitates a more neutral way of judging the overlay properties between individual photomasks within a mask set.

• Journal of Radiation Protection and Research
• /
• v.22 no.4
• /
• pp.309-317
• /
• 1997

The measured radioactivity of gamma-emitting radionuclides in each radioactive waste drum using the non-destructive waste assay method is underestimated than real radioactivity in radioactive waste drum because the gamma-rays are attenuated within the medium. Therefore, the measured radioactivity should be corrected for the attenuation of gamma-rays. For the correction of the attenuation of gamma-rays, the attenuation correction method should be applied differently by considering the distribution and density of medium in radioactive wastes drum generated from nuclear power plants. In this study, the model drums were fabricated for simulating five types of radioactive waste drums generated from nuclear power plant and the optimum methods of the attenuation correction were experimentally determined to analyze the activity of radionuclides in the waste drum accurately using the segmented gamma scanning system. With the determination of the attenuation correction methods from the experimental results the transmission method and the average density method for the miscellaneous waste drum, the transmission method and the differential peak absorption method for the shielded miscellaneous waste drum were used to measure the density of medium in waste drums. Also, the average density method and the differential peak absorption method for the spent resin drum, the paraffin solidified drum, and the spent filter drum were used.