• 한국해양공학회지
• /
• 제32권3호
• /
• pp.151-157
• /
• 2018

Offshore structures are exposed to low- and high-frequency responses due to environmental loads, and fatigue damage models are used to calculate the fatigue damage from these. In this study, we tried to optimize the main parameters used in fatigue damage calculation to derive a new fatigue damage model. A total of 162 bi-modal spectra using the elliptic equation were defined to describe the response of offshore structures. To calculate the fatigue damage from the spectra, time series were generated from the spectra using the inverse Fourier transform, and the rain-flow counting method was applied. The considered optimization variables were the size of the frequency increments, ratio of the time increment, and number of repetitions of the time series. In order to obtain optimized values, the fatigue damage was calculated using the parameter values proposed in previous work, and the fatigue damage was calculated by increasing or decreasing the proposed values. The results were compared, and the error rate was checked. Based on the test results, new values were found for the size of the frequency increment and number of time series iterations. As a validation, the fatigue damage of an actual tension spectrum found using the new proposed values and fatigue damage found using the previously proposed method were compared. In conclusion, we propose a new optimized calculation process that is faster and more accurate than the existed method.

• 대한전자공학회논문지SD
• /
• 제48권10호
• /
• pp.46-53
• /
• 2011

본 논문에서는 MLC 낸드플래시 메모리의 CCI(cell-to-cell interference)의 제거를 통한 에러 보정 등화기(equalizer)를 제안한다. 매년 메모리의 집적도가 두 배가 되고, MLC(multi level cell) 기술의 개발 등으로 플래시 메모리 시장의 급성장이 이루어졌다. CCI는 주변 셀이 프로그램 되면서 발생하는 영향으로 에러 발생에 중요한 요소이다. 제안된 CCI의 모델을 수식화하고, CCI의 제거를 통한 등화기를 설계하였다. 이 모델은 MLC 낸드플래시의 프로그램 순서와 주변 패턴을 기반으로 프로그램 전압(program voltage)의 영향이 고려되었다. 또한 제안된 등화기는 MLC NAND 플래시 메모리 1-블록에 데이터를 읽기/쓰기 동작의 측정 결과와 Matlab을 통하여 설계 및 검증되었다. 이 등화기는 심각한 CCI를 가지고 있는 20nm 낸드플래시 메모리 채널에서 약 60%의 에러 개선율을 보였다.

• 전자공학회논문지
• /
• 제50권9호
• /
• pp.119-126
• /
• 2013

본 논문은 영상 획득 장치에서 발생하는 색수차를 영상의 국부적 특성을 고려하여 보정하는 알고리즘을 제안한다. 색수차는 파장에 따른 렌즈의 회절률 차이로 인해 발생하며, 그 결과 영상의 강한 에지 영역에서 RGB 채널이 어긋나 색 결함이 생기게 된다. 제안하는 알고리즘은 이러한 색수차가 발생하는 특성을 이용하여 먼저 영상의 에지 영역과 그 주변부를 색수차가 발생되는 영역으로 검출한다. 이 후, 검출된 에지 영역에서 RGB 채널의 에지를 일치시키는 방법을 이용하여 색수차를 제거한다. 그 결과 기존의 색수차 제거 방법으로 널리 사용되는 전역적인 영상 와핑 방법으로는 제거하지 못하는 축상 색수차와 이미징 센서로부터 발생하는 purple fringing 결함까지도 저감시킬 수 있다. 실험 결과를 통해 제안하는 방법이 기존 방법에 비해 수치적인 면과 시각적인 면에서 뛰어난 결과를 보임을 확인할 수 있다.

• 대한기계학회논문집B
• /
• 제20권12호
• /
• pp.4013-4026
• /
• 1996

A numerical simulation has been carried out for the jet impinging on a flat plate and a semi-circular concave surface. In this computation finite volume method was employed to solve the full Navier-Stokes equation based on a non-orthogonal coordinate with non staggered variable arrangement. The standard k-.epsilon. turbulent model and low Reynolds number k-.epsilon. model(Launder-Sharmar model) with Yap's correction were adapted. The accuracy of the numerical calculations were compared with various experimental data reported in the literature and showed good predictions of centerline velocity decay, wall pressure distribution and skin friction. For the jet impingement on a semi-circular concave surface, potential core length was calculated for two different nozzle(round edged nozzle and rectangular edged nozzle) to consider effects of the nozzle shape. The result showed that round edged nozzle had longer potential core length than rectangular edged nozzle for the same condition. Heat transfer rate along the concave surface with constant heat flux was calculated for various nozzle exit to surface distance(H/B) in the condition of same jet velocity. The maximum local Nusselt number at the stagnation point occurred at H/B = 8 where the centerline turbulent intensity had maximum value. The predicted Nusselt number showed good agreement with the experimental data at the stagnation point. However heat transfer predictions along the downstream were underestimated. This results suggest that the improved turbulence modeling is required.

• Earthquakes and Structures
• /
• 제14권2호
• /
• pp.103-115
• /
• 2018

In this work, a simple but accurate hyperbolic plate theory for the free vibration analysis of functionally graded material (FGM) sandwich plates is developed. The significant feature of this formulation is that, in addition to including the shear deformation effect, it deals with only 3 unknowns as the classical plate theory (CPT), instead of 5 as in the well-known first shear deformation theory (FSDT) and higher-order shear deformation theory (HSDT). A shear correction factor is, therefore, not required. Two common types of FGM sandwich plates are considered, namely, the sandwich with the FGM face sheet and the homogeneous core and the sandwich with the homogeneous face sheet and the FGM core. The equation of motion for the FGM sandwich plates is obtained based on Hamilton's principle. The closed form solutions are obtained by using the Navier technique. The fundamental frequencies are found by solving the eigenvalue problems. Numerical results of the present theory are compared with the CPT, FSDT, order shear deformation theories (HSDTs), and 3D solutions. Verification studies show that the proposed theory is not only accurate and simple in solving the free vibration behaviour of FGM sandwich plates, but also comparable with the higher-order shear deformation theories which contain more number of unknowns.

• Structural Engineering and Mechanics
• /
• 제75권2호
• /
• pp.193-209
• /
• 2020

This paper presents a new hyperbolic shear deformation plate theory including the stretching effect for free vibration of the simply supported functionally graded plates in thermal environments. The theory accounts for parabolic distribution of the transverse shear strains and satisfies the zero traction boundary conditions on the surfaces of the plate without using shear correction factors. This theory has only five unknowns, which is even less than the other shear and normal deformation theories. The present one has a new displacement field which introduces undetermined integral variables. Material properties are assumed to be temperature-dependent, and graded in the thickness direction according to a simple power law distribution in terms of the volume power laws of the constituents. The equation of motion of the vibrated plate obtained via the classical Hamilton's principle and solved using Navier's steps. The accuracy of the proposed solution is checked by comparing the present results with those available in existing literature. The effects of the temperature field, volume fraction index of functionally graded material, side-to-thickness ratio on free vibration responses of the functionally graded plates are investigated. It can be concluded that the present theory is not only accurate but also simple in predicting the natural frequencies of functionally graded plates with stretching effect in thermal environments.

• 대한기계학회논문집B
• /
• 제20권2호
• /
• pp.720-729
• /
• 1996

An analysis of convective boiling heat transfer for refrigerant mixtures is performed for an annular flow to investigate the degradation of the heat transfer rate. Annular flow is selected in this study because a great portion of the evaporator in the refrigeration and air conditioning system is known to be in the annular flow regime. Mass transfer effect due to composition difference between liquid and vapor is included in this analysis, which is considered to be one of driving forces for the mass transfer at the interface. Due to the concentration gradient at the interface the mass transfer is interfered, so is the evaporative heat transfer at the interface. The mass transfer resistance makes the interface temperature slightly higher and, as a result, the heat transfer coefficients decrease compared with those without mass transfer effects. The degradatioin of the heat transfer rate reaches its maximum at a certain composition. The composition difference between vapor core and vapor at the interface has a direct effect on the temperature difference between the vapor core and the interface and the degradation of the heat transfer rate. Correction factor $C_{F}$ for the mixture effects is added to the correlation for pure substances and the flow boiling heat transfer coefficients can be calculated using the modified equation.n.

• 한국학교수학회논문집
• /
• 제2권1호
• /
• pp.219-229
• /
• 1999

Nowadays the use of computer has a tendency to be being increased in classroom. Also, Many mathematics teachers are attempting to use computer efficiently in classroom. Computer has unique functions such as graphic, animation, and error correction. As graphic and animation can make the content of mathematics visible and make it easy for learners to study mathematics, it is desirable to develop the computer educational program and use it in teaching and learning mathematics. Especially, before concepts study on the unit of Figure or Function, the use of graphic or animation is efficient by being able to understand easily the content. The purpose of this thesis is to produce the computer program on the Movement of Figure in the unit of Equation of Figure which is in mathematics curriculum for the first grade of high school. In teaching and learning mathematics by use of this program, the educational effects are expected as follows: 1. It is expected that this program will stimulate the interest of learners by using animation and acoustic (sound) effect and so learners' voluntary and active thinking activity will be shown. 2. It will be helpful to form exact concept because it is possible to understand intuitively the basic concepts on the Movement of Figure by using graphic and animation. 3. It is expected that the repeated study of this program already designed will remove the fear of incomplete parts and help review them. 4. It is possible to change from teacher-centered instruction, which is the blind point of recent mathematics education, to the learner-centered instruction. However, it is necessary to realize that using the educational engineering (computer) in mathematics education cannot always cause learners to study mathematics very well and that computer cannot take the place of mathematics teacher. Accordingly, computer will be treated as aids which help learners study difficult part.

• 한국해안·해양공학회논문집
• /
• 제23권5호
• /
• pp.335-344
• /
• 2011

곡면의 경계를 가지는 수로에서 비선형 파랑의 상호작용을 모의하기 위한 비정수압 자유수면 모형이 개발되었다. 제안된 모형은 비선형의 3차원 Navier-Stokes 방정식을 곡선좌표 영역에서 계산단계 분리법의 일종인 압력수정법에 의하여 수치적으로 해석된다. 특히, 연직방향으로 변형된 형태의 엇갈린 격자를 이용하여 상대적으로 간단하게 압력방정식과 자유수면 경계조건을 구성하였다. 개발된 모형의 수치해석 정확도는 2차원의 수치 파수조에서 파랑의 비선형 정도에 대하여 5차의 스토스우크스 해석해와 비교하였다. 본 모형의 실제적 적용은 원형의 수로에서 회절과 반사에 의해 변형되는 비선형 파의 변형에 초점을 맞추어 수행하였다. 두개의 파를 중첩한 고비선형의 파에 대한 경우를 제외하고 수치해석 결과는 비선형적인 영향을 고려하지 않은 해석해의 선형적인 중첩과 일치하였다. 두개의 파를 중첩한 고비선형의 파에 대한 모의를 통하여 본 모형은 원형의 수로에서 비선형 군파의 변형에관한 수치적인 모의 가능성을 제시하였다.

• 한국수자원학회논문집
• /
• 제37권8호
• /
• pp.613-622
• /
• 2004

Non-Darcy 제체내 침투수 흐름과 배수갑문을 통한 흐름의 특성을 고려한 최종체절의 수리특성분석 모형에 의한 해석결과는 실측자료와 잘 일치하여 개발된 모형의 적용성이 있음을 보여주었다. 실측치와의 비교에서 본간(1985) 식에 의한 계산결과가 나정우(1987)에 의한 방법보다 비교적 정확함을 보여주었다. 아울러 완전 또는 불완전 월류의 구분이 없이 완전월류식에 잠수도를 이용한 유량계수식을 사용한 나정우 식의 사용성을 보여 주었다. 본간 식과 나정우 식에 의한 계산 값이 실측치보다는 유출입 특성이 크게 나타나 현장에서 체절구간의 불규칙적인 단면 양상을 감안한 유량계수의 조정이 필요할 것으로 판단된다. 일반적으로 최종체절의 수리특성 분석에서 제체구간의 침투수 흐름의 고려는 Darcy 흐름에 기초하여 분석하여왔다. 제체내 침투수의 유량과 개방구간을 통과하는 유량의 비가 체절구간이 좁을수록 크게 나타나, 제체내 침투수의 정확한 해석에 의한 체절구간의 수리특성을 분석해야할 필요가 있다.