• Advances in materials Research
• /
• 제9권1호
• /
• pp.33-48
• /
• 2020

With the use of differential quadrature method (DQM), forced vibrations and resonance frequency analysis of functionally graded (FG) nano-size beams rested on elastic substrate have been studied utilizing a shear deformation refined beam theory which contains shear deformations influence needless of any correction coefficient. The nano-size beam is exposed to uniformly-type dynamical loads having partial length. The two parameters elastic substrate is consist of linear springs as well as shear coefficient. Gradation of each material property for nano-size beam has been defined in the context of Mori-Tanaka scheme. Governing equations for embedded refined FG nano-size beams exposed to dynamical load have been achieved by utilizing Eringen's nonlocal differential law and Hamilton's rule. Derived equations have solved via DQM based on simply supported-simply supported edge condition. It will be shown that forced vibrations properties and resonance frequency of embedded FG nano-size beam are prominently affected by material gradation, nonlocal field, substrate coefficients and load factors.

• 한국안전학회지
• /
• 제35권5호
• /
• pp.39-48
• /
• 2020

This study proposes a fast estimation method of dynamic reliability indices or failure probability for SDOF structure subjected to earthquake excitations. The proposed estimation method attempts to derive coefficient function for correcting dynamic effects from static reliability analysis in order to estimate the dynamic reliability analysis results. For this purpose, a total of 60 cases of structures with various characteristics of natural frequency and damping ratio under various allowable limits were taken into account, and various types of approximation coefficient functions were considered as potential candidate models for dynamic effect correction. Each reliability index was computed by directly performing static and dynamic reliability analyses for the given 60 cases, and nonlinear curve fittings for potential candidate models were performed from the computed reliability index data. Then, the optimal estimation model was determined by evaluating the accuracy of the dynamic reliability analysis results estimated from each candidate model. Additional static and dynamic reliability analyses were performed for new models with different characteristics of natural frequency, damping ratio and allowable limit. From these results, the accuracy and numerical efficiency of the optimal estimation model were compared with the dynamic reliability analysis results. As a result, it was confirmed that the proposed model can be a very efficient tool of the dynamic reliability estimation for seismically excited SDOF structure since it can provide very fast and accurate reliability analysis results.

• 한국측량학회지
• /
• 제35권4호
• /
• pp.241-248
• /
• 2017

GCPs (Ground Control Points) are needed to correct the DEM (Digital Elevation Model) produced from high-resolution satellite images and the RPC (Rational Polynomial Coefficient). It is difficult to acquire the GCPs through field surveys such as GPS surveys and to read the image coordinates corresponding to the GCPs. In addition, GCPs cannot cover the entire image of the test site, and the RPC correction results may be influenced by the arrangement and distribution of the GCPs in the image. Therefore, a new method for the RPC correction is needed. In this study, an LHD (Least-squares Height Difference) DEM matching method was applied using previous DEMs: SRTM DEM, digital map DEM, and corrected IKONOS DEM. This was carried out to correct the DEM produced from KOMPSAT-3 satellite images and the provided RPC without GCPs. The IKONOS DEM had the highest accuracy, and the height accuracy was about ${\pm}3m$ RMSE in a mountainous area and about ${\pm}2m$ RMSE in an area with only low heights.

• 한국수자원학회논문집
• /
• 제53권9호
• /
• pp.701-715
• /
• 2020

본 연구에서는 FAO-56 Penman-Monteith (FAO PM)를 비롯하여 Hamon, Hansen, Hargreaves-Samani, Jensen-Haise, Makkink, Priestley-Taylor, Thornthwaite 등 총 8가지 기준증발산량 산정방법을 이용하여 전국 기상청 ASOS 지점을 대상으로 각 방법에 따른 기준증발산량을 산정하여 비교하였다. 또한 가장 신뢰성이 높은 것으로 알려진 FAO PM값을 기준으로 나머지 7가지 방법에 의한 월별 편차를 분석하여 지점별 월별 보정계수를 도출하고, 보정에 따른 개선효과를 평가하였다. 먼저 각 방법의 기본계수를 적용하여 기준증발산량을 산정한 결과, 방법에 따라 큰 편차를 나타내었으며 Hansen 방법이 상대적으로 FAO PM과 유사한 것으로 나타났다. 반면, Hamon과 Jensen-Haise 방법은 여름철을 중심으로 타 방법대비 매우 큰 값을 보였으며, FAO PM과의 편차도 크게 나타났다. 지역별로는 동해안 일부지역을 제외하고 대부분의 지역에서 FAO PM과 비교하여 기준증발산량을 과다하게 산정하는 것으로 분석되었다. FAO PM 결과와의 편차를 기반으로 지점별 월별 최적화된 보정계수를 도출하고 기준증발산량을 다시 비교한 결과, 지점에 따라 보정 전에 -46 mm~+88 mm의 범위를 보였던 월 평균값은 보정 후 -11 mm~+1 mm로 나타났으며, 연 평균값도 -393 mm~+354 mm (보정 전)에서 -33 mm~+9 mm (보정 후)로 보정을 통하여 편차가 크게 감소되었다. 또한, 기온자료만을 이용하는 Hamon, Hargreave-Samani, Thornthwaite 방법들도 보정을 통하여 FAO PM과 큰 차이없는 결과를 도출하였다. 특히 기온기반의 방법들은 기후변화 시나리오 중 상대적으로 불확실성이 낮은 기온자료만을 이용하여 미래의 장기간의 기준증발산량을 전망하거나, 월 또는 계절예측 기온정보를 이용하여 수개월간의 기준증발산량을 예측하는 경우에 유용하게 활용될 수 있을 것이다.

• Wind and Structures
• /
• 제35권4호
• /
• pp.243-253
• /
• 2022

The conformal mapping method (CMM) has been broadly exploited in the study of fluid flows over airfoils and other research areas, yet it's hard to find relevant research in bridge engineering. This paper explores the feasibility of CMM in streamlined box girder bridges. Firstly, the mapping function transforming a unit circle to the streamlined box girder was solved by CMM. Subsequently, the potential flow solution of aerostatic pressure on the streamlined box girder was obtained and was compared with numerical simulation results. Finally, the aerostatic pressure attained by CMM was utilized to estimate the aerostatic coefficient and flutter performance of the streamlined box girder. The results indicate that the solution of the aerostatic pressure by CMM on the windward side is satisfactory within a small angle of attack. Considering the windward aerostatic pressure and coefficient of correction, CMM can be employed to estimate the rate of change of the lift and moment coefficients with angle of attack and the influence of the geometric shape of the streamlined box girder on flutter performance.

• 대한조선학회논문집
• /
• 제58권3호
• /
• pp.175-181
• /
• 2021

This study describes the model tests in ice according to the frictional coefficient of an ice-breaking ship and the change in ice resistance by the analysis method for each component of ice resistances. The target vessel is a 90K DWT ice-breaking tanker capable of operating in ARC7 ice conditions in the Arctic Ocean, and twin POD propellers are fitted. The hull was specially painted with four different frictional coefficients on the same ship model. The total ice resistance can be separated by ice breaking, ice buoyancy, ice clearing resistances through the tests in level ice, pre-sawn ice and creep test in pre-sawn ice under sea ice thickness of 1.2 m and 1.7 m. Ice resistance was analyzed by correcting the thickness and bending strength of model ice by the ITTC correction method. As the frictional coefficient between the hull and ice increases, ice buoyancy and clearing resistances increase significantly. When the surface of the hull is rough, it is considered that the broken ice pieces do not slip easily to the side, resulting in an increase in ice buoyancy resistance. Also, the frictional coefficient was found to have a great influence on the ice clearing resistance as the ice thickness became thicker.

• 전자공학회논문지
• /
• 제54권4호
• /
• pp.99-107
• /
• 2017

본 논문은 기존의 리튬 배터리(lithium battery) 등가모델의 정확도 개선을 위한 배터리 모델 계수 보정기법을 제안한다. 전기자동차 등 다양한 산업분야에 사용되는 리튬 배터리의 배터리 셀간 잔존용량(SOC, state of charge) 동일하게 유지하여 배터리 수명의 단축을 최소화하기 위해 BMS(battery management system)가 연구 개발 되었지만, 배터리 셀 전압 기반의 셀 밸런싱(cell balancing) 동작으로 내부저항 및 커패시터에 따른 SOC 변화를 따라가지 못한다. 배터리 내부저항 및 커패시터에 따른 배터리 SOC 추정을 위해 다양한 배터리 등가모델이 연구되었지만, 모든 배터리에 동일하게 적용하는 것은 한계가 있으며 특히 과도상태의 배터리 상태 추정이 어렵다. 기존의 배터리 전기적 등가모델 연구는 1종의 배터리를 대상으로 5~10% 오차율로 충 방전 동적특성을 모사하며 서로 다른 전기적 특성을 갖는 실제 배터리에 적용이 부적합하다. 따라서 본 논문에서는 모델 및 용량이 다른 실제 배터리 운용환경에 적합하며 오차율 5%이하의 동적특성 모사가 가능한 배터리 모델 계수 보정 알고리즘을 제안한다. 제안하는 배터리 모델 계수 보정법 검증을 위해 3.7 V 정격전압, 280 mAh, 1600 mAh 용량의 리튬 배터리를 사용하였으며, 리튬 배터리의 전기적 등가 모델로 2단 RC Tank 모델을 사용하였다. 또한 0.25C, 0.5C, 0.75C, 1C 4가지 C-rate를 사용하여 배터리 충 방전 실험 및 모델검증을 진행하였으며 제안하는 배터리 모델 계수 보정 알고리즘을 통해 구현한 두 종류의 배터리 모델의 배터리 충 방전 특성 및 과도상태 특성의 오차율은 최대 2.13%이다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3418-3422
• /
• 2007

The neutron imaging technique was used to investigate the water discharge characteristics at PEMFC. Prior to investigation of water discharge characteristics, the linear attenuation coefficient for water at Neutron Radiography Facility (NRF) was calibrated. The feasibility test apparatus was consisted of pressurized air and water in order to simulate the actual operating PEMFC. The feasibility tests have been performed at 1-parallel serpentine type with 100 $cm^2$ active area and different air flow rate (1, 2, and 4 lpm). The total water volume variations at each condition were calculated from the neutron images. The water at channel is well discharged as soon as supplying the pressurized air into the PEMFC. However, because the water at MEA isn't removed the total water volume is constant after 150. Therefore more effective method is needed in order to discharge water at MEA, and the neutron imaging technique is helpful for it.

• Earthquakes and Structures
• /
• 제12권4호
• /
• pp.397-407
• /
• 2017

To estimate the structural seismic demand, some methods are based on an equivalent linear system such as the Capacity Spectrum Method, the N2 method and the Equivalent Linearization method. Another category, widely investigated, is based on displacement correction such as the Displacement Coefficient Method and the Coefficient Method. Its basic concept consists in converting the elastic linear displacement of an equivalent Single Degree of Freedom system (SDOF) into a corresponding inelastic displacement. It relies on adequate modifying or reduction coefficient such as the inelastic deformation ratio which is usually developed for systems with known ductility factors ($C_{\mu}$) and ($C_R$) for known yield-strength reduction factor. The present paper proposes a rational approach which estimates this inelastic deformation ratio for SDOF bilinear systems by rigorous nonlinear analysis. It proposes a new inelastic deformation ratio which unifies and combines both $C_{\mu}$ and $C_R$ effects. It is defined by the ratio between the inelastic and elastic maximum lateral displacement demands. Three options are investigated in order to express the inelastic response spectra in terms of: ductility demand, yield strength reduction factor, and inelastic deformation ratio which depends on the period, the post-to-preyield stiffness ratio, the yield strength and the peak ground acceleration. This new inelastic deformation ratio ($C_{\eta}$) is describes the response spectra and is related to the capacity curve (pushover curve): normalized yield strength coefficient (${\eta}$), post-to-preyield stiffness ratio (${\alpha}$), natural period (T), peak ductility factor (${\mu}$), and the yield strength reduction factor ($R_y$). For illustrative purposes, instantaneous ductility demand and yield strength reduction factor for a SDOF system subject to various recorded motions (El-Centro 1940 (N/S), Boumerdes: Algeria 2003). The method accuracy is investigated and compared to classical formulations, for various hysteretic models and values of the normalized yield strength coefficient (${\eta}$), post-to-preyield stiffness ratio (${\alpha}$), and natural period (T). Though the ductility demand and yield strength reduction factor differ greatly for some given T and ${\eta}$ ranges, they remain take close when ${\eta}>1$, whereas they are equal to 1 for periods $T{\geq}1s$.

• 한국임상수의학회지
• /
• 제4권1호
• /
• pp.395-401
• /
• 1987

In this study, the effect of ambient temperature on the 45$^{\circ}$micro ESR/hr of cattle blood were observed, and a correction chart for correcting observed values at any ambient temperature to standard values at 20$^{\circ}C$ was plotted. Besides, the effect of storage temperature of blood on the 45$^{\circ}$micro ESR/hr was surveyed. The results were as follows: 1. The values of the 45$^{\circ}$micro ESR/hr were increased as the ambient temperature were elevated(P<0.01), and lower the value of PCV, higher the effect of temperature on the 45$^{\circ}$micro ESR/hr was observed(P<0.01). 2. Regression of values of 45$^{\circ}$micro ESR to ambient temperature in all the group of different level of blood PCV showed linear regression with the highly significant coefficient of correlation. With the results, correction chart was drawn as in Fig. 1. 3. In the purpose to verify the reliability of correction chart, observed values of 45$^{\circ}$micro ESR/hr in field(out door) were corrected to values at 20$^{\circ}C$ by the correction chart(Fig. 1), comparing with the observed values at 20$^{\circ}C$ of standard temperature. No significant differences were found between two groups mentioned above. 4. In the study on the effect of storage temperature of the blood on the 45$^{\circ}$micro ESR/hr, group of storage temperature at 5$^{\circ}C$ showed statistically no significant differences untill 24 hours in contrast with standard control group.