• 한국항공운항학회지
• /
• 제16권2호
• /
• pp.12-20
• /
• 2008

Japanese MSAS (Multi-functional Satellite Augmentation System) satellites have been transmitting GPS satellite orbit and ionosphere correction information since 2005. MSAS coverage includes Far East Asia, and it can improve the accuracy and integrity of GPS position solutions in Korea. This research analyzed the ionosphere correction information from the MSAS ionosphere correction data. The ionosphere delay data observed by a dual frequency receiver is compared with the MSAS ionosphere correction data. The variation of MSAS GIVE values are analyzed in connection with the equatorial anomaly and ionosphere scintillation.

• 대한원격탐사학회지
• /
• 제26권6호
• /
• pp.645-652
• /
• 2010

The performance of the payload Electro-Optical System (EOS) in satellite system is affected by various factors, such as optics design, camera electronics design, and the characteristics of the CCD (Charge Coupled Device) used, etc. Of these factors, the camera electronics design is somewhat unique in that its operational parameters can be adjusted even after the satellite launch. In this paper, the effect of video gain on the non-uniformity correction performance is addressed. And a new optimal non-uniformity correction scheme is proposed and analyzed using the data from real camera electronics unit based on a TDI (Time Delayed Integration) type of CCD. The test results show that the performance of the conventional non-uniformity correction scheme is affected significantly when the video gain is added. On the other hand, in our proposed scheme, the performance is not dependent on the video gain. The insensitivity of the non-uniformity performance on the video-gain is mainly due to the fact that the correction is performed after the dark signal is subtracted from system response.

• 정보처리학회논문지D
• /
• 제18D권1호
• /
• pp.67-80
• /
• 2011

재무 데이터 관리를 위한 자동화된 비지니스 서류 영상 처리 시스템에서 숫자 정보 검색 중 발생한 오류는 심각하여 그 시스템의 가용성 및 성능을 결정한다. 그 동안 자동 맞춤법 교정에 관한 방법론들이 개발되어 정보 검색 시스템 개발에 중요한 역할을 해왔으나 이러한 맞춤법 교정은 알파벳 등 기계학습이 가능하고 사전 형태로 보관이 가능한 기호에 한정되어왔다. 반면에 순수한 마코프 수열에 불과한 숫자들의 순열들은 맞춤법 교정을 위하여 사전적 형태로 보관하여 활용하는 것이 불가능 하다. 본 논문에서는 확률론적 정보 검색 알고리즘의 토대위에 제한적 문맥 인식과 복수의 스트림을 적용한 새로운 형태의 숫자 정정 OCR 모델을 제안하였다. 본 논문에서 제안된 숫자 정정 모델은 기존의 송장 문서 처리 시스템에 구현하였으며 제안된 숫자 정정 모델의 효과를 확인하기 위해 비교 테스트를 실행하였고 테스트 결과 상당한 성능이 개선되었음을 보여 주었다.

• 센서학회지
• /
• 제19권5호
• /
• pp.375-384
• /
• 2010

In this paper, we proposed a new shaft distortion correction system having an adaptive PID controller using displacement sensors, which is adaptively reflecting variations of shaft strength owing to irregular heat treatment during an annealing process and sensitivity to the seasonal temperature changes. Generally, the shafts are annealed by heat treatment in order to enlarge the strength of the shaft, which causes an distortion of a shaft such as irregular bending of the shaft. In order to correct such a distortion of the shaft, a mechanical pressure is properly impacted to the distorted shaft. However, the strength of every shaft is different from each other owing to irregular annealing and seasonal temperature changes. Especially, the strength of a thin shaft such as a car transmission shaft is much more sensitive than that of a thick shaft. Therefore, it is very important for considering the strength of each shaft during correction of the car transmission shaft distortion in order to generate proper mechanical pressure. The conventional PID controller for the shaft distortion correction system does not consider each different strength of each shaft, which causes low productivity. Therefore, we proposed a new PID controller considering variations of shaft strength caused by seasonal temperature changes as well as irregular heat treatment and different cooling time. Three displacement sensors are used to measure a degree of distortion of the shaft at three different location. The proposed PID controller generates adaptively different coefficients according to different strength of each shaft using appropriately obtained pressure times from long-term experiments. Consequently, the proposed shaft distortion correction system increases the productivity about 30 % more than the conventional correction system in the real factory.

• 핵의학기술
• /
• 제16권2호
• /
• pp.44-48
• /
• 2012

PET/CT 검사에서 환자의 움직임으로 인해 영상에서 냉소 인공물이 발생한다. 본 연구는 Discovery 600 PET/CT 장비의 산란제한보정법을 이용하여 영상을 평가하고 환자의 움직임으로 인한 냉소 인공물의 개선을 연구했다. Discovery 600 PET/CT 장비로 산란보정법과 산란제한보정법의 방사능 섭취와 표준섭취계수의 차이를 평가하기 위해 1994 NEMA Phantom$^{TM}$을 사용하였다. 또한 움직임에 의한 인공물을 재현하여 산란제한보정법을 적용한 방사능의 섭취 차이와 표준섭취계수의 차이를 비교 평가하였다. 산란제한보정법은 산란보정법과의 방사능 섭취, 표준섭취계수의 평가에서 큰 차이를 나타내지 않았다(p<0.05). 그리고 환자의 움직임으로 인한 PET/CT 영상에서의 산란보정법을 적용한 영상은 방사능 섭취가 최대 3.1 kBq/ml에서 0.04 kBq/ml로 약 98.7% 과소평가되었다. 그러나, 산란제한보정법을 적용한 영상은 방사능 섭취가 최대 3.0 kBq/ml에서 2.11 kBq/ml로 약 30%만 과소평가되었다. 표준섭취계수는 1.05에서 0.006으로 약 98% 과소평가 되었으나, 산란제한보정법을 적용 후 0.67로 측정되어 약 25%만 과소평가되었다. 방사능의 섭취와 표준섭취계수에서 산란제한보정법은 산란보정법에 비해 약 60% 이상 개선 효과가 있었다. PET/CT 검사 시 환자의 움직임에 의한 냉소 인공물이 발생한 환자에서 산란제한보정법을 적용한다면, 정확한 진단에 도움을 줄 것으로 사료 된다.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1986년도 추계학술발표회 논문집
• /
• pp.194-197
• /
• 1986

In this paper, for the curvature correction on the scanning plane in laser scanning system, aberration correction method using holographic optical element is suggested. Holoens is selected as a type of holographic zone plate which has aberration correction property. And hologram recording condition is analyzed to find fo property. This hololens is implemented by computer-generated hologram technique. Laser scanning system is organized using desinged hololens and scanning properties of this system are investigated. Using this method optical system structure in laser scanning system can be simplified satisfying both scan linearity and field flatness.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.669-676
• /
• 2018

Transmission system has been well studied since long time and power system techniques of distribution system are more or less derived from transmission system. However, unlike transmission systems, many practical issues are encountered in the distribution system. Considerable amount of error is observed in voltage obtained from the Feeder Remote Terminal Units (FRTUs) measured by the pole mounted PTs along the distribution feeder. Load uncertainty is also an issue in distribution system. Further, penetration of Distributed Generators (DGs) creates voltage variations in the system. Hybrid radial/ loop distribution system also make it complicated to handle distribution system. How these constraints to be handled under Distribution Automation (DAS) environment in order to obtain error free voltage is described in this paper and therefore, a new approach of voltage error correction technique has been proposed. The proposed technique utilizes reliable data from substation and the FRTUs installed in DAS. The proposed technique adopts an iterative process for voltage error correction. It has been tested and proved accurate not only for conventional radial systems but also for loop distribution systems.

• Journal of Positioning, Navigation, and Timing
• /
• 제2권2호
• /
• pp.109-114
• /
• 2013

The vulnerability of GPS to interference signals was reported in the early 2000s, and an eLORAN system has been suggested as a backup navigation system for replacing the existing GPS. Thus, relevant studies have been carried out in the United States, Europe, Korea, etc., and especially, in Korea, the research and development is being conducted for the FOC of the eLORAN system by 2018. The required performance of the eLORAN system is to meet the HEA performance, and to achieve this, it is essential to perform ASF correction based on a dLORAN system. ASF can be divided into temporal ASF, nominal ASF, and spatial ASF. Spatial ASF is the variation due to spatial characteristics, and is stored in an eLORAN receiver in the form of a premeasured map. Temporal ASF is the variations due to temporal characteristics, and are transmitted from a dLORAN site to a receiver via LDC. Unlike nominal ASF that is obtained by long-term measurement (over 1 year), temporal ASF changes in a short period of time, and ideally, real-time correction needs to be performed. However, it is difficult to perform real-time correction due to the limit of the transmission rate of the LDC for transmitting correction values. In this paper, to determine temporal ASF correction frequency that shows satisfactory performance within the range of the limit of data transmission rates, relative variations of temporal ASF in summer and winter were measured, and the stability of correction values was analyzed using the average of temporal ASF for a certain period.

• 한국수자원학회논문집
• /
• 제55권spc1호
• /
• pp.1271-1282
• /
• 2022

상수관망 최적설계는 사용자가 설정한 목적에 따라 다양하게 사용된다. 상수관망 최적설계는 비용의 최소화 및 관의 제작 시 발생하는 에너지 최소화 등 목적이 다양하게 존재한다. 본 연구에서는 Modified Hybrid Vision Correction Algorithm (MHVCA)을 기반으로 다양한 상수관망에 대한 비용 최적설계를 진행하였다. 또한 새로운 평가지표인 Best Rate (BR)를 제안하였다. BR은 K-mean Clustering Algorithm을 기반으로 개발된 평가지표이다. BR을 통해 상수관망 최적설계에 사용된 각 알고리즘의 최적 설계안 탐색 가능성에 대한 비교를 하였다. 다양한 관망에 대한 MHVCA의 최적설계 결과를 Vision Correction Algorithm (VCA) 및 Hybrid Vision Correction Algorithm (HVCA)과 비교하였다. MHVCA는 VCA 및 HVCA보다 낮은 비용의 설계안을 탐색하였다. 또한 MHVCA는 낮은 비용의 설계안을 탐색할 확률이 VCA 및 HVCA보다 높았다. MHVCA는 본 연구에서 적용한 비용 최소화를 위한 상수관망 최적설계 뿐만이 아닌 다양한 목적을 위한 상수관망 최적설계에 적용할 경우 좋은 결과를 나타낼 수 있을 것이다.

• 한국정밀공학회지
• /
• 제15권1호
• /
• pp.69-77
• /
• 1998

Linear displacement accuracy is one of the most important factors that determine machine tool accuracy The laser interferometer has been usually recommended for the measurement of linear displacement accuracy. In this paper, microcomputer aided measurement and compensation system has been developed for the pitch error in a CNC machine tool. For accurate pitch error calculation. the analysis code for the pitch error has been also implemented according to the international standards (ISO). The PC based automatic compensation system for the pitch error is also implemented. A new algorithm for calculating optimum value for pitch error compensation is proposed, minimizing the deviation at each target points. The development system has been applied to a practical CNC maching center and the performance has been demonstrated.