• Nuclear Engineering and Technology
• /
• v.50 no.8
• /
• pp.1306-1313
• /
• 2018

The randomness and incipient nature of certain faults in reactor systems warrant a robust and dynamic detection mechanism. Existing models and methods for fault diagnosis using different mathematical/statistical inferences lack incipient and novel faults detection capability. To this end, we propose a fault diagnosis method that utilizes the flexibility of data-driven Support Vector Machine (SVM) for component-level fault diagnosis. The technique integrates separately-built, separately-trained, specialized SVM modules capable of component-level fault diagnosis into a coherent intelligent system, with each SVM module monitoring sub-units of the reactor coolant system. To evaluate the model, marginal faults selected from the failure mode and effect analysis (FMEA) are simulated in the steam generator and pressure boundary of the Chinese CNP300 PWR (Qinshan I NPP) reactor coolant system, using a best-estimate thermal-hydraulic code, RELAP5/SCDAP Mod4.0. Multiclass SVM model is trained with component level parameters that represent the steady state and selected faults in the components. For optimization purposes, we considered and compared the performances of different multiclass models in MATLAB, using different coding matrices, as well as different kernel functions on the representative data derived from the simulation of Qinshan I NPP. An optimum predictive model - the Error Correcting Output Code (ECOC) with TenaryComplete coding matrix - was obtained from experiments, and utilized to diagnose the incipient faults. Some of the important diagnostic results and heuristic model evaluation methods are presented in this paper.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.5
• /
• pp.24-28
• /
• 1985

In this paper, the cyclic product codes which are capable of correcting random erros and burst errors simultaneously have been designed and constructed. First, the procedure for product of two cyclic codes is shown and thin the encoder and decoder system using the (7,4) cyclic Hamming code and the (3,1) cyclic code is implemented. The micro-computer is used for experiment and the system consists of encoder, decoder and interface circuits. The encoder of cyclic product code is implemented by interlacing encoders while the decoder is implemented by cascading decoders that interlace error trapping decoders. In conclusion, cyclic product codas are easily decodable and are capable of correcting four random errors and eight-burst errors. Better performance is obtained with low error rate.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.4
• /
• pp.231-235
• /
• 2011

In these day, the number of people who have an abnormal posture caused by bad habit are increasing. Therefore, people suffer various disease and symptoms. For correcting the posture to cure, we need continuous monitor, expenditure of time and money. In this study, we develop a posture correcting aid system in other to monitor a posture continuously and leads to pose correctly and records postural variation which are attached to the neck and the waist. The devised system showed good potential for the correct posture guide and a cure of postural defect.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.11
• /
• pp.2116-2120
• /
• 2007

A realization for image distortion correction processing system with DSP processor is presented in this paper. The image distortion correcting algorithm is realized by DSP processor for focusing on more real time processing than image quality. The lens and camera distortion coefficients are processed by the Lookup Tables and the correcting algorithm is applied to reverse mapping method for geometrical transform. The system experimentation results in the processing time about 31.3 msec $720{\times}480$ wide range image, and the image is stable and spontaneous to be about 8.3% average PSNR variation with changing a wide angle.

• Journal of radiological science and technology
• /
• v.45 no.6
• /
• pp.553-560
• /
• 2022

The purpose of this study is to evaluate the clinical risk according to the applicator heterogeneity, mislocation, and tissue heterogeneity correction through a dose verification program during brachytherapy of cervical cancer. We performed image processing with MATLAB on images acquired with CT simulator. The source was modeled and stochiometric calibration and Monte-Carlo algorithm were applied based on dwell time and location to calculate the dose, and the secondary cancer risk was evaluated in the dose verification program. The result calculated by correcting for applicator and tissue heterogeneity showed a maximum dose of about 25% higher. In the bladder, the difference in excess absolute risk according to the heterogeneity correction was not significant. In the rectum, the difference in excess absolute risk was lower than that calculated by correcting applicator and tissue heterogeneity compared to the water-based calculation. In the femur, the water-based calculation result was the lowest, and the result calculated by correcting the applicator and tissue heterogeneity was 10% higher. A maximum of 14% dose difference occurred when the applicator mislocation was 20 mm in the Z-axis. In a future study, it is expected that a system that can independently verify the treatment plan can be developed by automating the interface between the treatment planning system and the dose verification program.

• Journal for History of Mathematics
• /
• v.21 no.2
• /
• pp.103-118
• /
• 2008

Barcode technology is becoming an essential tool for every companies, and this makes help us to gain time, analysis of goods, an inventory control, a prevention of burglar and so on. In this paper, we have treated about the history of barcode, its error correcting using the check digit, and the present and future of barcode. We wish roles of mathematician on new barcode system which it bring on an economical efficiency and stability.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.4
• /
• pp.737-745
• /
• 1999

In this paper, we present encoders and decoders with the two kinds of ternary Bose-Chaudhuri-Hocquenghem(BCH) codes in the most basic ternary code system from among multiple-valued code systems. One is the random-triple-error-correcting ternary BCH(26,14) code for sequential data, the other is random-triple -error-correcting ternary BCH (26,13) code. The encoders and the decoders realized are verified by experiment. Amount of the (26,13) decoder's hardware is about 50% of the one of the (26,14) decoder's one.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.5
• /
• pp.738-745
• /
• 2009

Underwater acoustic communication has multipath error because of reflection by sea-level and sea-bottom. The multipath of underwater channel causes receive signal to make error floor. In this paper, we propose the underwater communication system using various channel coding schemes such as RS coding, convolutional code, turbo code and concatenated code for overcoming the multipath effect in underwater channel. As shown in simulation results, characteristic of multipath error is similar to that of random error. So interleaver has not effect on error correcting. For correcting of error floor by multipath, it is necessary to use strong channel codes like turbo code. Turbo code is one of the iterative codes. And the performance of concatenated codes including RS code has better performance than using singular channel codes.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.103-110
• /
• 2005

We present a powerful error control decoder which can be used in all of the commercial DVD systems. The decoder exploits the error information from the modulation decoder in order to increase the error correcting capability. We can identify that the modulation decoder in DVD system can detect errors more than $60\%$ of total errors when burst errors are occurred. In results, fur a decoded block, error correcting capability of the proposed scheme is improved up to $25\%$ more than that of the original error control decoder. In addition, the more the burst error length is increased, the better the decoder performance. Also, a pipeline-balanced RSPC decoder with a low hardware complexity is designed to maximize the throughput. The maximum throughput of the RSPC decoder is 740Mbps@100MHz and the number of gate counts is 20.3K for RS (182, 172, 11) decoder and 30.7K for RS (208, 192, 17) decoder, respectively

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1619-1621
• /
• 2005

AC electric railway feeding system classifies into three groups such as normal, TIE and PP feeding method. If the feeding scheme of ac electric railway is changed, current distribution flowing through the line is also modified. And if the current distribution is altered according to the feeding scheme, returned tendency through rail load current or fault current of the train is changed. So the investigation about error correcting method of protective relay is needed considering feeding scheme. In this paper prior to error correcting of protective relay, through interpreting feeding circuit, changes in current distribution of the rail in accordance with feeding would be predicted and analyzed.