• Nuclear Engineering and Technology
• /
• v.50 no.5
• /
• pp.673-682
• /
• 2018

One of the most widely used methods to estimate core damage during a nuclear power plant accident is containment radiation measurement. The evolution of severe accidents is extremely complex, leading to uncertainty in the containment dose rate (CDR). Therefore, it is difficult to accurately determine core damage. This study proposes to conduct uncertainty analysis of CDR for core damage assessment. First, based on source term estimation, the Monte Carlo (MC) and point-kernel integration methods were used to estimate the probability density function of the CDR under different extents of core damage in accident scenarios with late containment failure. Second, the results were verified by comparing the results of both methods. The point-kernel integration method results were more dispersed than the MC results, and the MC method was used for both quantitative and qualitative analyses. Quantitative analysis indicated a linear relationship, rather than the expected proportional relationship, between the CDR and core damage fraction. The CDR distribution obeyed a logarithmic normal distribution in accidents with a small break in containment, but not in accidents with a large break in containment. A possible application of our analysis is a real-time core damage estimation program based on the CDR.

• Journal of the Korean Society of Systems Engineering
• /
• v.16 no.2
• /
• pp.47-58
• /
• 2020

Most of the reactor trips in Korean NPPs related to core protection systems were caused not because of proximity of boiling crisis and, consequently, a damage in the core, but due to particular miscalculations or component failures related to the core protection system. The most common core protection system applied in Korean NPPs is the Core Protection Calculator System (CPCS), which is installed in OPR1000 and APR1400 plants. It generates a trip signal to scram the reactor in case of low Departure from Nucleate Boiling Ratio (DNBR) or high Local Power Density (LPD). However, is a reactor trip necessary to protect the core? Or could a fast power reduction be enough to recover the DNBR/LPD without a scram? In order to analyze the online calculation of DNBR/LPD, and the use of fast power reduction as trip avoidance methodology, a concept of CPCS with fast power reduction function was developed in Matlab® Simulink using systems engineering approach. The system was validated with maximum of 0.2% deviation from the reference and the dynamic deviation was maximum of 12.65% for DNBR and 6.72% for LPD during a transient of 16,000 seconds.

• Journal of Korean Library and Information Science Society
• /
• v.8
• /
• pp.97-126
• /
• 1981

The professional duties of librarians and other information workers involve a generalized body of both theoretical and practical knowledge (the so-called, 'common core') which is a n.0, pplicable worldwide without regard to national boundaries, levels of economic and technical development or cultural context. The current study is an attempt to validate and su n.0, pport this common core concept through a detailed examination of its important role in the sound development of library and information science both as a learned subject and as a profession. Following an initial overview of generally agreed upon core areas in the education and training of librarians and information specialists, with particular attention to the manifold social changes rapidly being effected by computers and communication technology, the focus shifts to the proliferation of academic homes for information science education and its implications for core areas in information science. Of note here is the relationship between information science as a broadly accepted social science discipline and the evolving core curriculum in library schools. To this regard the fact that the popularization of computers and communication technology is increasingly blurring the once-sharp differences between traditional librarians and information specialists naturally favors common core concept. Major figures in library and information science education such as Shera, Saracevic and Foskette su n.0, pport this concept and have already identified its theoretical infrastructure. Finally, UNESCO and IFLA are also stressing the common core cure curriculum for library and information science both as guidelines for the Third World and as a means to achieve universally accepted academic standards. In conclusion, the search for a comprehensive common core curriculum in library and information science education is still in the elementary stages. The task of identifying the components of this common core is among the most crucial responsibilities facing today's educators and professionals for the successful elaboration of a common core would enable us to attain three highly desirable professional goals: 1) To determine the basic concepts and principles of library and information science. 2) To serve as the base for further professional education and specialized research. 3) To offer enhanced o n.0, pportunities for integrated library and information science education programs by providing a genuine two-way communication channel between the library and information science professions.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.11a
• /
• pp.29-33
• /
• 2000

The purpose of this paper is to determine the effect of the autoclave inner pressure rate, heat-up rate, tool round angle, Thickness of core, height of joggle on defects, and to minimize the defects of aircraft sandwich structure reinforced with honeycomb core occurred in autoclave processing. The results showed that the geometry of aircraft sandwich structure and tool such as tool round angle, Thickness of core, height of joggle, and the autoclave cure conditions such as inner pressure rate, heat up rate strongly affected the core movement, core wrinkle, bridge phenomenon of prepreg and depression of core that occurred in autoclave processing.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.1
• /
• pp.56-60
• /
• 2010

Titanium dioxide particles are used as photocatalysts, sensors, adsorbents and catalyst. Core-shell polymers of inorganic/organic pair, which have both core and shell component, were synthesized by sequential emulsion polymerization using Acrylate as a shell monomer and potassium persulfate (KPS) as an initiator. We found that when Acrylate core prepared by adding 0.5~2.0 wt% EU-S133D, Titanium dioxide / Acrylate core-shell polymerization was carried out on the surface of Titanium dioxide particle without forming the new Titanium dioxide particle during acrylate shell polymerized in the inorganic/organic core-shell polymer preparation. The structure of core-shell polymer were investigated by measuring to the thermal decomposition of polymer composite using thermogravimetric analyzer(TGA) and morphology of latex by scanning electron microscope(SEM).

• 한국생물공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.686-686
• /
• 2005

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1169-1170
• /
• 2006

We made a high-speed motor and a DC brush-less motor for factory automation (FA) to investigate applicability of powder magnetic core to motor application, and compared those performances with the similar motors having conventional electro magnetic steel core. Permeability and saturated magnetization of powder magnetic core are less than those of elect romagnetic steel core, however output performances of each core motor are almost the same. The FA motor with powder magnetic core using three-dimensional magnetic circuit showed higher torque than the same volume motor with electromag netic steel core.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.5
• /
• pp.219-224
• /
• 2015

Recently, the multi-core processor architecture is widely used in the digital signal processors for enhancing its performance. Multi-core processors are classified either as symmetric or asymmetric. Asymmetric multi-core processors are known to have higher performance and more efficient than symmetric multi-core processors. In order to study the performance enhancement of asymmetric multi-core digital signal processors over the symmetric ones, the trace-driven simulation has been executed for various asymmetric quad-core, octa-core and hexadeca-core digital signal processors and compared with the symmetric ones of similar hardware budget using UTDSP benchmarks as input.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1161-1164
• /
• 1998

We designed a DSP core simulator with C language, that is able to simulate 5-stage pipelined DSP core, named YS-DSP. It can emulate all 5 stage pipelines in the DSP core. It can also emulate memory access, exception processing, and DSP parallel processing. Each pipeline stage is implemented by combination of one or more functions to process parts of each stage. After modeling and validating the simulator, we can use it to verify and to complement the DSP core HDL model and to enhance its performance.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.4
• /
• pp.414-424
• /
• 2022

Objectives: This study was established to ascertain the requirements and implementation of core competencies for employees of the a workers' health center. Methods: The study consisted of a four-step process: a literature review, focus group interviews, expert opinions, and a questionnaire. The survey was conducted online among 119 employees of the National Workers' Health Center. Results: As a result of the research, eleven core competencies and 37 sub-competencies were derived in three areas: Competence as a social worker, competence to perform duties, and competence for maintaining expertise. The key demands for core competencies were "health consultation" and "understanding of small businesses.". They responded that they needed to "maintain an ethical attitude" and "consult on workers' health.". The largest score difference between core competency requirements and competency implementation was "collaboration with the community.". Conclusions: It is necessary to increase competencies not only for competencies with high core requirements, but also for relatively low competencies. In addition, efforts should be made to improve the core competencies of the employees of the Workers' Health Center to effectively respond to changes in the industrial structure and crises such as COVID-19.