• Korean Chemical Engineering Research
• /
• v.53 no.1
• /
• pp.46-52
• /
• 2015

A leaching kinetics was conducted for the purpose of recovery of praseodymium in sulfuric acid ($H_2SO_4$) from REE slag concentrated by the smelting reduction process in an arc furnace as a reactant. The concentration of $H_2SO_4$ was fixed at an excess ratio under the condition of slurry density of 1.500 g slag/L, 0.3 mol $H_2SO_4$, and the effect of temperatures was investigated under the condition of 30 to $80^{\circ}C$. As a result, praseodymium oxide ($Pr_6O_{11}$) existing in the slag was completely converted into praseodymium sulfate ($Pr_2(SO_4)_3{\cdot}8H_2O$) after the leaching of 5 h. On the basis of the shrinking core model with a shape of sphere, the first leaching reaction was determined by chemical reaction mechanism. Generally, the solubility of pure REEs decreases with the increase of leaching temperatures in sulfuric acid, but REE slag was oppositely increased with increasing temperatures. It occurs because the ash layer included in the slag is affected as a resistance against the leaching. By using the Arrhenius expression, the apparent activation energy of the first chemical reaction was determined to be $9.195kJmol^{-1}$. In the second stage, the leaching rate is determined by the ash layer diffusion mechanism. The apparent activation energy of the second ash layer diffusion was determined to be $19.106kJmol^{-1}$. These relative low activation energy values were obtained by the existence of unreacted ash layer in the REE slag.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.1
• /
• pp.50-55
• /
• 2008

In this paper, New LC VCO with $8{\sim}10.9$ GHz Band has been designed using commercial $0.35-{\mu}m$ CMOS technology. This proposed circuit is consisted of the parallel construction of the typical NMOS and PMOS cross-coupled pair which is based on the LC tank, MOS cross-coupled pair which has same tail current of complementary NMOS and PMOS, and output buffer. The designed LC VCO, which is according to proposed structure in this paper, takes a 29% improvement of the wide tuning range as 8 GHz to 10.9 GHz, and a 6.48mW of low power dissipation. Its core size is $270{\mu}m{\times}340{\mu}m$ and its phase noise is as -117dBc Hz and -137dBc Hz at 1-MHz and 10-MHz offset, respectively. FOM of the new proposed LC VCO gets -189dBc/Hz at a 1-MHz offset from a 10GHz center frequency. This design is very useful for the 10Gb/s clock generator and data recovery integrated circuit(IC) and SONET communication applications.

• Geophysics and Geophysical Exploration
• /
• v.22 no.3
• /
• pp.149-159
• /
• 2019

Borehole elemental concentration logging, measuring neutron-induced gamma rays by inelastic scattering and neutron capture interactions between neutron and formation, delivers concentrations of the most common elements found in the minerals and fluids of subsurface formation. X-ray diffraction and X-ray fluorescence analysis from core samples are traditionally used to understand formation composition and mineralogy, but it represents only part of formations. Additionally, it is difficult to obtain elemental analysis over the whole intervals because of poor core recovery zones such as fractures or sand layers mainly responsible for groundwater flow. The development of borehole technique for in situ elemental analysis plays a key role in assessing subsurface environment. Although this technology has advanced consistently starting from conventional and unconventional resources evaluation, it has been considered as exclusive techniques of some major service company. As regards domestic research and development, it has still remained an unexplored field because of some barriers such as the deficiency of detailed information on tools and calibration facility for chemistry and mineralogy database. This article reviews the basic theory of spectroscopy measurements, system configuration, calibration facility, and current status. In addition, this article introduces the domestic researches and self-development status on borehole elemental concentration tools.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.7
• /
• pp.1237-1245
• /
• 2006

This paper presented a hardware implementation of ARIA, which is a Korean standard l28-bit block cryptography algorithm. In this work, ARIA was designed technology-independently for application such as ASIC or core-based designs. ARIA algorithm was fitted in FPGA without additional components of hardware or software. It was confirmed that the rate of resource usage is about 19% in Altera EPXAl0F1020CI and the resulting design operates stably in a clock frequency of 36.35MHz, whose encryption/decryption rate was 310.3Mbps. Consequently, the proposed hardware implementation of ARIA is expected to have a lot of application fields which need high speed process such as electronic commerce, mobile communication, network security and the fields requiring lots of data storing where many users need processing large amount of data simultaneously.

• Journal of Digital Contents Society
• /
• v.16 no.4
• /
• pp.535-543
• /
• 2015

Recently, NAND flash based storage devices are being used as a storage device in various fields through hiding the limitations of NAND flash memory and maximizing the advantages. In particular, those storage devices contain a software layer called Flash Translation Layer(FTL) to hide the "erase-before-write" characteristics of NAND flash memory. FTL includes the metadata for managing the data requested from host. That metadata is stored in internal memory because metadata is very frequently accessed data for processing the requests from host. Thus, if the power-loss occurs, all data in memory is lost. So metadata management scheme is necessary to store the metadata periodically and to load the metadata in the initialization step. Therefore we proposed the scheme which satisfies the core requirements for metadata management and efficient operation. And we verified the efficiency of proposed scheme by experiments.

• Journal of Gastric Cancer
• /
• v.12 no.3
• /
• pp.194-200
• /
• 2012

Purpose: The aim of this study was to evaluate chronological change of quality of life after surgery in patients with gastric cancer during one year postoperatively. Materials and Methods: Quality of life data were obtained from 272 gastric cancer patients who underwent curative gastrectomy between September 2008 and February 2011 at the Kyungpook National University Hospital. The Korean versions of the European Organization for Research and Treatment of Cancer (EORTC) Quality of Life Questionnaire Core (QLQ) 30 with gastric cancer-specific module, the EORTC QLQ-STO22 were used to assess quality of life. All patients had no evidence of recurrence or metastasis during the first postoperative year. Patients were asked to complete the questionnaire, by themselves preoperatively, 3-, 6-, 9-, and 12-months postoperatively. Results: Physical functioning score and role functioning score significantly decreased at first 3 months after surgery and the significant differences were noticed until 12 months after surgery. Emotional functioning score started with the lowest score before surgery and significant improvement was shown 6 months after surgery. Most symptom scores and STO-22 scores were highest at 3 months after surgery and gradually decreased, thereafter. Eating restriction, anxiety, taste, body image scores was highest at 3 months after surgery without significant decrease afterwards. Conclusions: Most scales worsened after surgery and gradually recovered afterwards with some differences in rate of recovery. However the scales did not fully recover by 1 year period. Further follow-up after 1 year would be helpful in determining which scales are permanently damaged and which are just taking longer time to recover.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.17 no.1
• /
• pp.35-44
• /
• 2011

Background: This study was to suggest the process of making strategy for effective intervention and evaluation on functional problems of the frozen shoulder patient applied International Classification of Functioning Disability and Health (ICF) Tools. Methods: The patient was 48years old woman with right shoulder adhesive capsulitis and calcific tendinitis. In first phase, therapists could list the information relating to functional problems used by the ICF Core set and then could confirm the interaction among the problems using the ICF assessment sheet. In second phase, therapist is needed to make the hypothesis and hypothesis testing and then set a primary functional goals and therapeutic goals in detail after prioritizing the problems to be managed based on the problem list. Lastly, after setting the confirmed problems as the purpose of intervention through the hypothesis testing, therapist could do some intervention after making a plan to solve these problems. Results: This report illustrates how to apply the process based on ICF concept into physical therapy practice. The decided hypothesis and goal that are to solve the problems the client faced were remarkably meaningful. Conclusions: Clinical decision making for the most effective intervention requires that therapists use the clinical reasoning process based on ICF concept.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.9
• /
• pp.4023-4043
• /
• 2016

Network virtualization has been regarded as a core attribute of the Future Internet. In a network virtualization environment (NVE), multiple heterogeneous virtual networks can coexist on a shared substrate network. Thus, a substrate network failure may affect multiple virtual networks. In this case, it is increasingly critical to provide survivability for the virtual networks against the substrate network failures. Previous research focused on mechanisms that ensure the resilience of the virtual network. However, the resource efficiency is still important to make the mapping scheme practical. In this paper, we study the survivable virtual network embedding mechanisms against substrate link and node failure from the perspective of improving the resource efficiency. For substrate link survivability, we propose a load-balancing and re-configuration strategy to improve the acceptance ratio and bandwidth utilization ratio. For substrate node survivability, we develop a minimum cost heuristic based on a divided network model and a backup resource cost model, which can both satisfy the location constraints of virtual node and increase the sharing degree of the backup resources. Simulations are conducted to evaluate the performance of the solutions. The proposed load balancing and re-configuration strategy for substrate link survivability outperforms other approaches in terms of acceptance ratio and bandwidth utilization ratio. And the proposed minimum cost heuristic for substrate node survivability gets a good performance in term of acceptance ratio.

• KEPCO Journal on Electric Power and Energy
• /
• v.3 no.1
• /
• pp.29-34
• /
• 2017

Leaching kinetics for extracting yttrium from the coal fly ash was investigated in the presence of sulfuric acid during extraction. The leaching kinetics of yttrium were conducted at reactant densities of 5~1,000 g coal fly ash per L of $1.0{\sim}10.0N\;H_2SO_4$, agitation speed of 250 rpm and temperature ranging from 30 to $90^{\circ}C$. As a result, the leaching kinetic model was determined in a two-step model based on the shrinking core model with spherical particles. The first step was proceeded by chemical reaction at ash surface, and the second step was proceeded by ash layer diffusion because the leaching conversion of yttrium by the first chemical reaction increases with increased the time irrelevant to the temperature whereas it increases with increased the leaching temperature. The activation energy of the first chemical leaching step was determined to be $1.163kJmol^{-1}$. After the first chemical reaction, the activation energy of ash layer diffusion leaching was derived to be $41.540kJmol^{-1}$. The optimum conditions for leaching the yttrium metal of 60 % were found to be the slurry density of 250 g fly ash per L of $H_2SO_4$, solvent concentration of $2.0N\;H_2SO_4$, second step leaching of temperatures of $30^{\circ}C$ for 3 hours and then $90^{\circ}C$ for 3 hours at agitation rate of 250 rpm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.650-661
• /
• 2020

The digital transformation of the 4th industrial revolution is leading to changes and innovations in the global economy. Various countries are focusing on reviving their manufacturing industries and economic recovery through smart factories. The purpose of this study is to empirically identify technological determinants for the successful implementation of the smart factory and to verify teose effects on manufacturing operations and the firms' operational/environmental performances. Five factors, including sensor network, platform technology, information system, intelligent automation, and safety, were defined as core technologies. The SEM analysis results of 157 small and medium-sized manufacturing firms that have implemented smart factories are as follows. First, sensor network, platform technology, and information system had significant effects on smart manufacturing operations. Second, smart manufacturing operations have improved firm performance. This study is valuable in that it has confirmed the effectiveness of government-funded projects and systemized key technologies for implementing smart factories. Meanwhile, it is helpful for practitioners to support an efficient and effective decision-making for the new adoption.