• The Journal of Korean Academy of Prosthodontics
• /
• v.18 no.1
• /
• pp.49-57
• /
• 1980

The adhesive mechanisms on the metal-ceramic restorations have been reported to be mechanical interlocking, chemical bonding, compressive force, and Van der Waal's force, etc. Of these, the mechanical interlocking and chemical bonding forces are thought to affect the adhesive force between Ni-Cr alloy and porcelain. This study investigates the adhesion of Ni-Cr alloy to porcelain according to surface treatment. For this purpose, the following experiments were made; The compositions of Ni-Cr alloy as cast by emission spectrograph, and the oxides produced on Ni-Cr alloy during degassing at $1850^{\circ}F$ for 30 minutes in air and in vacuum were analyzed by X-ray diffractograph. The metal phases of Ni-Cr alloy were observed according to porcelain-baking cyclic heat treatment by photo microscope and the distribution and the shift of elements of Ni-Cr alloy and porcelain and the failure phases between Ni-Cr alloy and porcelain by scanning electron microscope. The adhesive force between Ni-Cr alloy and porcelain was measured according to surface treatment with oxidization and roughening by Instron Universal Testing Machine. Results were as follows; 1. The metal phases of Ni-Cr alloy as cast and degassing state showed the enlarged and fused core, but when subjected to porcelain-baking cyclic heat treatment, showed a dendrite growing. 2. The kinds of metal oxides produced on Ni-Cr alloy during degassing were found to be NiO and $Cr_2O_3$. 3. The distribution of elements at the interface of Ni-Cr alloy and porcelain in degassing state showed demarcation line, but in roughening state, showed mechanical interlocking phase. 4. The shift of elements at the interface occurred in both states, but the shift amount was found to be larger in roughening than in degassing. 5. The adhesive force between Ni-Cr alloy and porcelain was found to be $3.45{\pm}0.93kg/mm^2$, in degassing and $3.82{\pm}0.99kg/mm^2$, in roughening. 6. The failure phase between Ni-Cr alloy and porcelain showed the mixed type failure.

• Nuclear Engineering and Technology
• /
• v.25 no.3
• /
• pp.413-423
• /
• 1993

This paper reports an experimental study of direct containment heating (DCH) which would occur if the primary system pressure is still high at the time of vessel breach during a light water reactor core melt accident. The experiments were conducted in 1/30-scale cavity models of Kori unit 1 and 2 and Young Kwang unit 3 and 4 nuclear power plants. One 1/20-scale model of the Kori plant was also used to investigate the scaling effect. The primary variables in the experiments were initial vessel pressure, vessel breach size and cavity geometry. It is observed that higher initial pressure and larger breach size enhance the melt dispersal fraction. Also, the cavity geometry appears to affect the dispersal rate greatly. A simple correlation of melt dispersal fraction is proposed in terms of nondimensional effective period. This correlation shows good agreement with the present experimental data, the KAIST data and the BNL data.

• Journal of Information Technology Applications and Management
• /
• v.25 no.2
• /
• pp.53-72
• /
• 2018

This empirical study explored characteristics that affect the usefulness of online reviews, in the China e-commerce platform, and implemented multiple regressions to find factors that significantly influence on product sales, ultimately. Till now, prior studies have continuously revealed what factor affects usefulness of online review or product sales, only in respective terms. The point of our study is that we built two-level regression models, thereby being able to comprehensively analyze these two different targets. Before plunging into running regressions, we carefully collected 192,764 online review data for 200 products extracted from the Jingdong, the second biggest e-commerce platform in China. Also, we gathered "review sentimental scores" variable from each review and used that one as a core variable in our regression model, thus we were able to implement both quantitative and qualitative research. The evidences from the two-level regression models showed that the extent to which a product is experience good positively affects both usefulness of a review and product sales, again the usefulness of a review contributes to product sales in sequence. Also, the property of experience good has interaction effect on both for two-level regression models. Our main findings highlight the importance of role of online review to business performance of e-commerce firms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.6B
• /
• pp.650-662
• /
• 2011

The competition among companies in converged market of broadcasting and telecommunications has become severe. Companies in this market have vertically integrated critical resources by acquiring or strategically allying with relevant companies. However, the expansion of business territory accompanies financial, organizational, and technological risks. As such, it is important to identify critical success factors that highly affect the company's competency. This study is aimed at delivering strategic implications for firms playing in the converged market of broadcasting and telecommunications by drawing the priorities of competitive resources to acquire. To do this, we selected four teen specific core resources on CPNT (content- platform - network - terminal) value chain. Then, we conducted an Analytic Hierarchical Process (AHP) using data from experts in this industry. As a result, the priority for acquisition of competitive resources is presented as follows: broadcasting programs, implementation of TV application store, multi-platform, investment on wireless network, and diffusion of mobile devices. In addition, the result shows that the platform-centric vertical integration is the most promising strategy for competition.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.9
• /
• pp.1609-1616
• /
• 2017

The complex roles of cell surface modification in the biofilm formation of Campylobacter jejuni, a major cause of worldwide foodborne diarrheal disease, are poorly understood. In a screen of mutants from random transposon mutagenesis, an insertional mutation in the eptC gene (cj0256) resulted in a significant decrease in C. jejuni NCTC11168 biofilm formation (<20%) on major food contact surfaces, such as polystyrene and borosilicate glass, when compared with wild-type cells (p < 0.05). In C. jejuni strain 81-176, the protein encoded by eptC modified cell surface structures, such as lipid A, the inner core of lipooligosaccharide, and the flagellar rod protein (FlgG), by attaching phosphoethanolamine. To assess the role of eptC in C. jejuni NCTC11168, adherence and motility tests were performed. In adhesion assays with glass surfaces, the eptC mutant exhibited a $0.77log\;CFU/cm^2$ decrease in adherence compared with wild-type cells during the initial 2 h of the assay (p < 0.05). These results support the hypothesis that the modification of cell surface structures by eptC affects the initial adherence in biofilm formation of C. jejuni NCTC11168. In motility tests, the eptC mutant demonstrated reduced motility when compared with wild-type cells, but wild-type cells with the transposon inserted in a gene irrelevant to biofilm formation (cj1111c) also exhibited decreased motility to a similar extent as the eptC mutant. This suggests that although eptC affects motility, it does not significantly affect biofilm formation. This study demonstrates that eptC is essential for initial adherence, and plays a significant role in the biofilm formation of C. jejuni NCTC11168.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.1
• /
• pp.1-11
• /
• 2020

Behaviors of wake vortices generated by an aircraft affect the performance and flight stability of flying aircraft in formation flight. In the present study, the trajectories of the wake vortices behind airplanes in close formation flight were computed using a Fourier spectral method. The behavior of wake vortices showed complex patterns depending on the initial circulation and the relative positions between the vortices. In the initial stage, the wake vortex movement was affected by the nascent vortex. When the vortex becomes closer to the other vortex, then a new trajectory is formed. When the viscous effect becomes dominant, the core radius increases. Thus, a new vortex moving near the existing vortex can have strong interaction with each other, resulting in the complicated behavior of wake vortices. In the future, the ground effect on the behavior of the wake vortices during take-off and landing will be studied.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.653-657
• /
• 2008

Industry related to digital contents is growing rapidly and is noticed as a higher value-added business. In digital reflex contents industry, computer graphics techniques are core techniques. Because they make production or scene that is difficult to photograph possible with real camera, expand a range of contents making. Lately, computer graphics techniques apply various fields such as blockbuster movie, game, educational contents, simulation etc, and there are many studies about movement of each object made up of contents or automation of object change. This paper shows the process of fishes growth, from spawn to a full-grown fish making use of 3D morphing techniques and want to plan fish growth process system that can know difference between fishes that are applied to 3D morphing techniques and normal full-grown fishes according to various environmental factors that affect growth.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.37 no.3
• /
• pp.201-207
• /
• 2017

Hay-making is one of the most common forage preservation practices in livestock operations. The objective of hay-making is to minimize nutrient loss by shortening field drying time. Measuring the impacts of cutting height of forage crop is necessary to optimize hay production balancing yield and quality, in order to obtain substantial biomass increase through harvest of regrowth. This experiment was conducted to investigate the impact of cutting height of rye (Secale cereale L.) on drying rate and hay quality. Heading stage rye was harvested at 8cm or 15cm stubble heights. Hay was daily tedded at 09:00 and sampled at 09:00, 13:00 and 17:00 to determine moisture content (MC). After two month of preservation, CP (crude protein), ADF (acid detergent fiber), NDF (neutral detergent fiber), IVDMD (in vitro dry matter disappearance), TDN (total digestible nutrient), RFV (relative feed value), DM (dry matter) loss, visual scores and total fungi count were determined for estimation of hay quality. Cutting height at 15cm could enhance the drying rate and CP content (p<0.05), but also increases DM loss (p<0.05) compared to cutting at 8cm. Cutting heights did not affect ADF, NDF, IVDMD, TDN and RFV value (p>0.05). Visual scores of rye hays cutting at 8cm and 15cm, ranged from 83 to 85. Cutting at 8cm tended to maintain higher core bale temperature and fungal count than cutting at 15cm during preservation, but there was no significant difference.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.3
• /
• pp.482-487
• /
• 2009

This research proposed a dashpot type mount design using MR fluids, and derived governing equation of the proposed design considering the design parameters of the mount and the Bingham characteristics of MR fluids, which affect the damping forces of the dashpot MR fluid mount. In odor to observe the change of magnetic properties which occurs from the solenoid, the effective length of the magnetic pole and the structure of core are selected as design parameters. The magnetic field quality is calculated in compliance with an equivalent magnetic circuit method. When the effective length of pole increases, the magnetic resistance of the pole of the MR mount decreased, and the magnetic flux density is increased. The result which uses a commercial business software and the result in compliance with equivalent magnetic circuit method shows the tendency which is similar.

• Journal of dental hygiene science
• /
• v.15 no.6
• /
• pp.746-752
• /
• 2015

Four hundreds and eighty-seven dental hygiene students were selected and a questionnaire survey was carried out to find out how emotional intelligence and ego resiliency affect interpersonal skills so that this can be the basis to enhance their interpersonal skills. PASW statistics 18.0 was used for analysis, results are as follows: It was statistically significant that students with higher emotional intelligence and ego resiliency and good interpersonal skills answered that they had high economic standard of living (p<0.001, p<0.05). Students raised by parents showed high emotional intelligence and ego resiliency (p<0.05), same result was shown among religious students too (p<0.05). Students with high ego resiliency showed better interpersonal skills (p<0.001), and ego resiliency influenced more on interpersonal skills than emotional intelligence. Therefore, curriculum to develop emotional intelligence and ego resiliency of dental hygiene students to improve their interpersonal skills which is one of the core competences of dental hygienist needs to be planned in the course.