• Restorative Dentistry and Endodontics
• /
• v.41 no.4
• /
• pp.271-277
• /
• 2016

Objectives: In this study, we evaluated the influence of different radiant exposures provided by single-peak and polywave light-curing units (LCUs) on the degree of conversion (DC) and the mechanical properties of resin cements. Materials and Methods: Six experimental groups were established for each cement (RelyX ARC, 3M ESPE; LuxaCore Dual, Ivoclar Vivadent; Variolink, DMG), according to the different radiant exposures (5, 10, and $20J/cm^2$) and two LCUs (single-peak and polywave). The specimens were made (7 mm in length ${\times}$ 2 mm in width ${\times}$ 1 mm in height) using silicone molds. After 24 hours of preparation, DC measurement was performed using Fourier transform infrared spectrometry. The same specimens were used for the evaluation of mechanical properties (flexural strength, FS; elastic modulus, E) by a three-point bending test. Data were assessed for normality, after which two-way analysis of variance (ANOVA) and post hoc Tukey's test were performed. Results: No properties of the Variolink cement were influenced by any of the considered experimental conditions. In the case of the RelyX ARC cement, DC was higher when polywave LCU was used; FS and E were not influenced by the conditions evaluated. The LuxaCore cement showed greater sensitivity to the different protocols. Conclusions: On the basis of these results, both the spectrum of light emitted and the radiant exposure used could affect the properties of resin cements. However, the influence was material-dependent.

• Nuclear Engineering and Technology
• /
• v.34 no.1
• /
• pp.42-59
• /
• 2002

In order to transmute long-lived radioactive nuclides such as transuranics(TRU), Tc-99, and I- l29 in LWR spent fuel, a preliminary conceptual design study has been performed for the accelerator driven subcritical reactor system, called HYPER(Hybrid Power Extraction Reactor) The core has a hybrid neutron energy spectrum: fast and thermal neutrons for the transmutation of TRU and fission products, respectively. TRU is loaded into the HYPER core as a TRU-Zr metal form because a metal type fuel has very good compatibility with the pyre- chemical process which retains the self-protection of transuranics at all times. On the other hand, Tc-99 and I-129 are loaded as pure technetium metal and sodium iodide, respectively. Pb-Bi is chosen as a primary coolant because Pb-Bi can be a good spallation target and produce a very hard neutron energy spectrum. As a result, the HYPER system does not have any independent spallation target system. 9Cr-2WVTa is used as a window material because an advanced ferritic/martensitic steel is known to have a good performance under a highly corrosive and radiation environment. The support ratios of the HYPER system are about 4∼5 for TRU, Tc-99, and I-129. Therefore, a radiologically clean nuclear power, i.e. zero net production of TRU, Tc-99 and I-129 can be achieved by combining 4 ∼5 LWRs with one HYPER system. In addition, the HYPER system, having good proliferation resistance and high nuclear waste transmutation capability, is believed to provide a breakthrough to the spent fuel problems the nuclear industry is faced with.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.2 s.117
• /
• pp.213-218
• /
• 2007

In this paper, we propose the design and fabrication on high frequency CMOS VCO for DS-UWB(Direct-Sequence Ultra-WideBand) applications using 0.18 ${\mu}m$ process. The complementary cross-coupled LC oscillator architecture which is composed of PMOS, NMOS symmetrically, is designed for improving the phase noise characteristic. The resistor is used instead of current source that reduce the 1/f noise of current source. The high-speed buffer is needed for measuring the output characteristic of VCO using spectrum analyzer, therefore the high-speed inverter buffer is designed with VCO. A fabricated core VCO size is $340{\mu}m{\times}535{\mu}m$. The VCO is tunable between 7.09 and 7.52 GHz and has a phase noise lower than -107 dBc/Hz at 1-MHz offset over entire tuning range. The measured harmonic suppression is 32 dB. The VCO core circuit draws 2.0 mA from a 1.8 V supply.

• Nuclear Engineering and Technology
• /
• v.48 no.1
• /
• pp.55-63
• /
• 2016

Calculation of the core neutronic parameters is one of the key components in all nuclear reactors. In this research, the energy spectrum and spatial distribution of the neutron flux in a uranium target have been calculated. In addition, sensitivity of the core neutronic parameters in accelerator-driven subcritical advanced liquid metal reactors, such as electron beam energy ($E_e$) and source multiplication coefficient ($k_s$), has been investigated. A Monte Carlo code (MCNPX_2.6) has been used to calculate neutronic parameters such as effective multiplication coefficient ($k_{eff}$), net neutron multiplication (M), neutron yield ($Y_{n/e}$), energy constant gain ($G_0$), energy gain (G), importance of neutron source (${\varphi}^*$), axial and radial distributions of neutron flux, and power peaking factor ($P_{max}/P_{ave}$) in two axial and radial directions of the reactor core for four fuel loading patterns. According to the results, safety margin and accelerator current ($I_e$) have been decreased in the highest case of $k_s$, but G and ${\varphi}^*$ have increased by 88.9% and 21.6%, respectively. In addition, for LP1 loading pattern, with increasing $E_e$ from 100 MeV up to 1 GeV, $Y_{n/e}$ and G improved by 91.09% and 10.21%, and $I_e$ and $P_{acc}$ decreased by 91.05% and 10.57%, respectively. The results indicate that placement of the Np-Pu assemblies on the periphery allows for a consistent $k_{eff}$ because the Np-Pu assemblies experience less burn-up.

• Korean Journal of Materials Research
• /
• v.16 no.12
• /
• pp.754-760
• /
• 2006

Mercaptoundecanoic acid (MUA) has been used to enhance the dispersity of Au nanoparticles in organic solvent and the affinity between the Au nanoparticles surface and titanium dioxide shell in the synthesis of $Au/TiO_2$ core-shell composite nanoparticles. The dispersity of the MUA-coated Au nanoparticles in ethanol aqueous solution with different concentration of $H_2O$ was investigated by UV-Vis. absorption spectrum and the coating amount of MUA was varied from 0.02 mM to 1.0 mM. The MUA-coated Au nanoparticles were highly dispersed in pure $H_2O$ in the wide range of the coating amount of MUA. On the contrary, the MUAcoated Au nanoparticles showed an enhanced stability in the ethanol/$H_2O$=8/2 mixed solution only when the coating amount of MUA was 0.05 mM, and in the ethanol/$H_2O$=7/3 mixed solution when the coating amount of MUA was in the range from 0.02 mM to 0.17 mM. From this systematic study, it can be inferred that the stability and the dispersibility of Au nanoparticles in organic solvents are highly sensitive towards the amount of MUA coating.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.17 no.2
• /
• pp.79-90
• /
• 2006

Social deficits are the most critical and core deficits of the children with Autistic Spectrum Disorder(ASD) and they are qualitatively as well as qualitatively different from typically developing children. It is proposed that the attachment between the mother and the autistic child should be promoted foremost and early as possible, to improve social deficits, just like early social developments in normal children depend largely on interactions between the mother and the child who are attached to each other we have developed an interventional program, 'Attachment Promotion Therapy', largely based on the attachment theory. The Attachment promotion Therapy mandates the participation of both the mother and the autistic child, and consists of mutually enjoying play activities, close physical contacts and parental training on intense mother-child interactions, focusing on improving maternal sensitivity, responsiveness, and nurturing behaviors during their interactions. The program was found to be effective in improving attachment behaviors, attachment security and acquiring joint attention skills. Attachment Promotion Therapy is therefore proposed here as the important earliest intervention method for children with ASD and could become the base for many other educational and therapeutic interventions.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.42.2-42.2
• /
• 2015

High frequency peakers (HFPs) are promising candidates for young active galactic nuclei (AGNs). Their small physical scale (< 1 kpc) and radio spectrum peaked at high frequency (> 5 GHz) are suggestive that it has been only about $10^2-10^3$ years since a central massive black hole in their host galaxies was launched. Until recently however, long-term monitoring radio observations at frequencies which are high enough to cover the true peak of HFP candidates were rare. Therefore, previous HFP samples are often contaminated by blazars, which are highly variable, hence may show a similar radio spectrum as HFPs depending on the observational epoch. In this work, we challenge to identify genuine young AGNs by monitoring HFP candidates at high radio frequencies. We performed single-dish monitoring of 19 candidates in 18 epochs over 2.5 years at 22 and 43 GHz using the Korean VLBI Network (KVN). Also, using KaVA, a combined array of the KVN and the VERA in Japan, we carried out 22 GHz VLBI observations of two HFPs and one blazar selected from our sample in order to compare their parsec scale (milli-arcsecond scale) morphology. HFPs are expected to have double/triple features, so called compact symmetric objects, which are scaled-down versions of extended radio galaxies, while blazars typically show core-jet morphology. We discuss the properties of AGNs at their very early evolutionary stage based on the results of the KVN and KaVA observations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.4
• /
• pp.853-871
• /
• 2012

The location based service is divided into GPS that uses the artificial satellite or base transceiver station in order to cover the wide area and RTLS(Real Time Location System) using the Zigbee, RFID, CSS(Chirp Spread Spectrum), UWB, Bluetooth and Wi-Fi equipment in the space(close range) limited like the building inside or park. Moreover it also repeats the technical development upon through the acceleration of the development of the wire and wireless infrastructure and determination technology, the development of the Internet, diversification of the contents, and etc. As a result, it is expected to develop around the determination technology, witch is common core technology element, contents technology, Internet and mobile communication technology, and etc. afterward. In this research, the direction we investigate was to find and analyze new technology and standardization trend of LBS in order to contribute to the related industry.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.6
• /
• pp.909-921
• /
• 1995

The objective of this paper is to develop an algorithm for a real-time automatic fingerprint recognition system. The algorithm employs the Fast Fourier Transform (FFT) in determining the directions of ridges in fingerprint images, and utilizes statistical information in recognizing the fingerprints. The information used in fingerprint recognition is based on the dircetions along ridge curves and characteristic points such as core points and delta points. In order to find ridge directions, the algorithm applies the FFT to a small block of the size 8x8 pixels, and decides the directions by interpreting the resulted Fourier spectrum. By using the FFT, the algorithm does not require conventional preprocessing procedures such as smoothing, binarization, thinning, and restorationl. Finally, in matching two fingerprint images, the algorithm searches and compares two kinds of feature blocks, one as the blocks where the dircetions cannot be defined from the Fourier spectrum, and the other as the blocks where the changes of directions become abrupt. The proposed algorithm has been implemented on a SunSparc-2 workstation under the Open Window environment. In the experiment, the proposed algorithm has been applied to a set of fingerprint images obtained by a prism system. The result has shown that while the rate of Type II error - Incorrect recognition of two different fingerprints as the identical fingerprints - is held at 0.0%, the rate of Type I error - Incorrect recognition of two identical fingerprints as the different ones - is 2.2%.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.2
• /
• pp.58.1-58.1
• /
• 2010

Telescope Array (TA) experiment in Utah, USA, observes ultrahigh-energy cosmic rays (UHECRs); UHECRs refer cosmic rays with energy above $10^{18}eV$. Using COSMOS and CORSIKA, we have produced a library of over 1000 thinned extensive air shower (EAS) simulations with the primary energies ranging from $10^{18.5}eV$ to $10^{20.25}eV$ and the zenith angle of primary cosmic ray particle from $0^{\circ}$ to $45^{\circ}$. Here, we present the energy spectrum of particles arriving at the ground. We have also calculated the detector response evaluated using GEANT4 simulations. Here, we discuss S(800), i.e. the signal at a distance of 800 m from the shower core, as the primary energy estimator.