• 제목/요약/키워드: Core Component

검색결과 715건 처리시간 0.027초

Characteristics of the magnetic flux-offset type FCL by switching component

  • Jung, Byung-Ik;Choi, Hyo-Sang
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제18권2호
    • /
    • pp.18-20
    • /
    • 2016
  • The study of superconducting fault current limiter (SFCL) is continuously being studied as a countermeasure for reducing fault-current in the power system. When the fault occurred in the power system, the fault-current was limited by the generated impedance of SFCLs. The operational characteristics of the flux-offset type SFCL according to turn ratios between the primary and the secondary winding of a reactor were compared in this study. We connected the secondary core to a superconductor and a SCR switch in series in the suggested structure. The fault current in the primary and the secondary winding of the reactor and the voltage of the superconductor on the secondary were measured and compared. The results showed that the fault current in the load line was the lowest and the voltage applied at both ends of the superconductor was also low when the secondary winding of the reactor had lower turn ratio than the primary. It was confirmed based on these results that the turn ratio of the secondary winding of the reactor must be designed to be lower than that of the primary winding to reduce the burden of the superconductor and to lower the fault current. Also, the suggested structure could increase the duration of the limited current by limiting the continuous current after the first half cycle from the fault with the fault current limiter.

A Study on the Breakdown Mechanism of Rotating Machine Insulation

  • Kim, Hee-Gon;Kim, Hee-Soo;Park, Yong-Kwan
    • Journal of Electrical Engineering and information Science
    • /
    • 제2권3호
    • /
    • pp.71-76
    • /
    • 1997
  • A lot of experiments and analyses have been done to determine the aging mechanism of mica-epoxy composite material used for large generator stator windings in order to estimate remaining life of the generator for last decades. After degrading artificially the mica-epoxy composite material, the surface analysis is performed to analyze breakdown mechanism of insulation in air and hydrogen atmosphere; i) In the case of air atmosphere, it is observed that an aging propagation from conductor to core by partial discharge effect and the formation of cracks between layers is widely carbonized surface. ii) In case of hydrogen atmosphere, the partial discharge effect is reduced by the hydrogen pressure (4kg/$\textrm{cm}^2$). Potassium ions forming a sheet of mica is replaced by hydrogen ions, which can lead to microcracks. It is confirmed that the sizes of crack by SEM analysis are 10∼20[$\mu\textrm{m}$] in length under air, and 1∼5[$\mu\textrm{m}$] in diameter, 10∼50[$\mu\textrm{m}$] in length under hydrogen atmosphere respectively. The breakdown mechanism of sttor winding insulation materials which are composed of mica-epoxy is analyzed by the component of materials with EDS, SEM techniques. We concluded that the postassium ions of mica components are replaced by H\ulcorner, H$_3$O\ulcorner at boundary area of mica-epoxy and/or mica-mica. It is proposed that through these phenomena, the conductive layers of potassium enable creation of voids and cracks due to thermal, mechanical, electrical and environmental stresses.

  • PDF

SIMULINK를 이용한 연료 이송용 제트펌프 기본 설계에 관한 연구 (Study on Preliminary Design of Fuel Transfer Jet Pump Using SIMULINK)

  • 공창덕;박종하;한동주
    • 한국추진공학회지
    • /
    • 제10권1호
    • /
    • pp.38-43
    • /
    • 2006
  • 본 논문에서는 항공우주 부품 기술 개발 사업 중 연료 이송용 제트펌프 개발의 일환으로 제트펌프의 기본 설계 및 해석을 수행하였다. 제트펌프는 항공기 연료탱크 내에 위치하여 격막 간 또는 라인 간 연료 이송을 위하여 설치되는 연료 계통 이송 기능을 위해서 소요되는 핵심 부품이다. 제트펌프의 기본 설계를 위해 SIMULINK를 이용하여 계산식들을 모델링하였고 이를 바탕으로 제트펌프의 기본 설계 및 유동장 해석을 수행하였고 해석 결과 1차 노즐 출구에서 유체의 압력은 감소하면서 속도는 증가하고 유체가 디퓨져로 빠져나가면서 유체의 압력은 증가하고 속도는 감소하는 경향을 확인하였다.

UML을 이용한 PDM 시스템 요구사항 분석 (Requirement Analysis Using UML on PDM System Development)

  • 오대균;김용균;이장현;신종계
    • 한국CDE학회논문집
    • /
    • 제13권2호
    • /
    • pp.121-130
    • /
    • 2008
  • The concept of integrated product information has been universalized so that many manufacturing industries have applied the concept to their production system. The field of PDM (Product Data Management), which is one of the core components of the integrated product information, is not an exception. Therefore, various PLM (Product Lifecycle Management) software providers are in process of suggesting the PDM solutions. As the PDM solution is widely adopted in the manufacturing industries, the successful application of the solution has been gathering more strength in manipulation of the product information. However, the standardized implementation methodology is stuck in the basic level contrast with the enhanced PDM's functionality and capability. Present study refers to the application of UML (Unified Modeling Language), which is an object oriented modeling description, to PDM system development procedure. The advantage of UML is its efficiency and effectiveness in handling complex requirement often found in PDM implementation works. This paper shows the integration of PDM and UML proposes a philosophy for the support of requirement analysis throughout the full implementation of PDM system.

TECHNICAL REVIEW ON THE LOCALIZED DIGITAL INSTRUMENTATION AND CONTROL SYSTEMS

  • Kwon, Kee-Choon;Lee, Myeong-Soo
    • Nuclear Engineering and Technology
    • /
    • 제41권4호
    • /
    • pp.447-454
    • /
    • 2009
  • This paper is a technical review of the research and development results of the Korea Nuclear Instrumentation and Control System (KNICS) project and Nu-Tech 2012 program. In these projects man-machine interface system architecture, two digital platforms, and several control and protection systems were developed. One platform is a Programmable Logic Controller (PLC) for a digital safety system and another platform is a Distributed Control System (DCS) for a non-safety control system. With the safety-grade platform PLC, a reactor protection system, an engineered safety feature-component control system, and reactor core protection system were developed. A power control system was developed based on the DCS. A logic alarm cause tracking system was developed as a man-machine interface for APR1400. Also, Integrated Performance Validation Facility (IPVF) was developed for the evaluation of the function and performance of developed I&C systems. The safety-grade platform PLC and the digital safety system obtained approval for the topical report from the Korean regulatory body in February of 2009. A utility and vendor company will determine the suitability of the KNICS and Nu- Tech 2012 products to apply them to the planned nuclear power plants.

Chromatin-remodeling Factor INI1/hSNF5/BAF47 Is Involved in Activation of the Colony Stimulating Factor 1 Promoter

  • Pan, Xuefang;Song, Zhaoxia;Zhai, Lei;Li, Xiaoyun;Zeng, Xianlu
    • Molecules and Cells
    • /
    • 제20권2호
    • /
    • pp.183-188
    • /
    • 2005
  • INI1/hSNF5/BAF47 is a core component of the hSWI/ SNF ATP-dependent chromatin remodeling complex, and it has been implicated in regulating gene expression, cell division and tumorigenesis. We investigated whether INI1/hSNF5/BAF47 functions in activation of the colony stimulating factor 1 (CSF1) promoter in HeLa cells. Overexpression of INI1/hSNF5/BAF47 promoted CSF1 transcription, and siRNA targeting INI1/hSNF5/ BAF47 (siINI1) strongly inhibited the activity of the CSF1 promoter. We demonstrated that all conserved domains of INI1/hSNF5/BAF47 are needed for CSF1 transcription. ChIP experiment showed that INI1/ hSNF5/BAF47 is recruited to the region of the CSF1 promoter. Taken together, these results indicate that INI1/hSNF5/BAF47 is involved in activation of the CSF1 promoter.

Primary Analysis of Information Distribution at Walkbase Company: Developing an Information Strategy

  • Ahmadinia, Hamed;Karim, Muhaimin;Ofori, Edward
    • 산경연구논집
    • /
    • 제6권4호
    • /
    • pp.5-16
    • /
    • 2015
  • Purpose - Currently, organizations must have a plan to achieve their future objectives. In this case, an information strategy facilitates greater success when planning for the future in any organization. Research design, data, and methodology - The core objective of the project was to explore the information infrastructure of Walkbase in a discursive manner. We started the project by providing a description of the firm, which facilitates retail outlets using in-store analytical devices. Results - We conclude that the management of Walkbase revised its current information structure to implement a more structured one that might be included in a long-term investment. On such an occasion, management can prioritize the component to develop first. Conclusions - Along with our results, we also described the business, its products, its facilities, and how it can serve different industries. Finally, we left the prioritization decision within the framework's components to top management.

The Effect of Corporate Social Responsibility Practices on Brand Equity: An Examination of Malaysia's Top 100 Brands

  • ZAHARI, Abdul Rahman;ESA, Elinda;RAJADURAI, Jegatheesan;AZIZAN, Noor Azlinna;MUHAMAD TAMYEZ, Puteri Fadzline
    • The Journal of Asian Finance, Economics and Business
    • /
    • 제7권2호
    • /
    • pp.271-280
    • /
    • 2020
  • The study aims to provide some evidence of the effects of CSR practices on financial-based brand equity in Malaysia. Nowadays, many companies have embraced corporate social responsibility (CSR) practices because CSR is a vital component of the current competitive and complex business arena. It contributes greatly to social, environmental, and economic condition. With CSR practices, companies are able to achieve many benefits and there is evidence that CSR practices predict higher brand equity. However, little evidence has been produced concerning the effects of CSR practices on financial aspects of brand equity in developing countries such as Malaysia. Therefore, this paper aims to investigate the effects of CSR practices on financial based brand equity among Malaysia Top 100 brand. A CSR checklist instrument was used in the current study to examine the extent of CSR practiced. The results indicated that PLCs that were actively involved in CSR practices such as environmental, community, workplace and marketplace, found that this involvement enhanced their brand equity. The findings provide useful support and evidence for the management of PLCs in Malaysia, as well as companies in other developing countries, to engage more in CSR practices as a core element of their strategic and brand management.

Paramics를 이용한 APID, DELOS평가 (Performance Test of APIS, DELOS Algorithm using Paramics)

  • 남두희
    • 한국인터넷방송통신학회논문지
    • /
    • 제13권4호
    • /
    • pp.61-66
    • /
    • 2013
  • 교통관리 시스템에서 돌발상황 관리시스템은 매우 중요한 역할을 차지하고 있다. 여러 종류의 알고리즘이 사용되고 있는데 이 중에서 APID, DELOS가 가장 많이 사용되고 있다. 검지알고리즘의 경우는 localization이 중요하며 교통상황에 적합한 파라미터의 검증과, 검지기 자료의 유효성 문제가 지적되고 있다. 본 논문에서는 APID, DELOS 돌발상황 검지알고리즘의 평가를 위해 방법론 및 시나리오를 구성하여 교통여건별, 시나리오별로 평가하였다. 특히, 알제리의 실제 도로망을 이용하여 평가를 진행하였다. 모든 조건을 만족하는 하나의 돌발상황 검지알고리즘을 개발한다는 것은 어려우며 각 도로 및 교통조건에 맞추어 최적의 알고리즘을 적용하는 것이 바람직할 것으로 판단된다.

교통영상에서의 규칙에 기반한 차량영역 검출기법 (Rule-based Detection of Vehicles in Traffic Scenes)

  • 박영태
    • 대한전자공학회논문지SP
    • /
    • 제37권3호
    • /
    • pp.31-40
    • /
    • 2000
  • 영상정보에 기반한 교통제어시스템의 핵심요소인 교통영상에서의 차량의 위치, 대수를 측정하는 견실한 기법을 제시하였다. 제안한 기법은, 배경영상을 제거한 차 영상으로부터 국부 최적 임계값 산출기법에 의해 차량의 밝고 어두운 증거영역을 추출하고 차량의 기하학적 특정을 이용해 3개의 규칙으로 합병하는 증거추론 (Evidential reasoning)에 기반을 두었다 국부 최적 임계값 산출기법은 차량형상이 중첩되었거나 차량의 색상이 배경영상과 유사할 경우에도 치량의 밝고 어두운 증거영역의 분리를 보장한다 다양한 교통영상에 적용한 결과 카메라의 거리, 위치, 날씨 등의 동작 환경의 변화에 매우 견실한 검지 성능을 가점을 확인하였고 프레임사이의 움직임 정보를 사용하지 않았으므로 차량의 흐름이 정체되었을 경우에도 적용이 가능하다.

  • PDF