• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05a
• /
• pp.225-230
• /
• 1996

A three-dimensional reactor core simulation code, MASTER has been developed as a part of ADONIS which is the Korean core design package in KAERI. CASMO-3 is used as a precedent lattice code for two-group microscopic cross section and heterogeneous formfunctions. The pin power reconstruction capability of CASMO-3/MASTER was evaluated for a validation and verification Five B&W critical experiments were selected as benchmark problems. These problems included two experiments for CE-type and three for WH-type fuel assemblies. Two of them contained gadolinia rods as burnable absorber. Comparison of the calculated pin power distributions with the measured ones demonstrate that CASMO-3/MASTER can predict the pin power distribution as well as CASMO-3/SIMULATE-3.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.05a
• /
• pp.42-45
• /
• 2001

The characteristics of smart skin for wireless LAN system under compression load are investigated. The smart skin structure is composed of 3 layers of face material and 2 layers of core material. Theoretical formula for determining buckling load is derived by Rayleigh-Ritz method and compared with experimental result. The maximum length of specimen that buckling does not occur is determined by only face material. In the experiment, if load supporting capability and the antenna property such as radiation pattern and reflection coefficient were examined.

• BMB Reports
• /
• v.52 no.1
• /
• pp.3-4
• /
• 2019

Cellular senescence is defined as a state of stable cell cycle exit in response to various stimuli, which include both cytotoxic stress and physiological cues. In addition to the core non-proliferative aspect, senescence is associated with diverse functionalities, which contribute to the role of senescence in a wide range of pathological and physiological processes. Such functionality is often mediated by the capability of senescent cells to communicate with their surroundings. Emerging evidence suggests that senescence is not a single entity, but a dynamic and heterogeneous collective phenotype. Understanding the diverse nature of senescence should provide insights into the complexity of tissue homeostasis and its disruption, such as in aging and tumorigenesis.

• Journal of Korean Institute of Industrial Engineers
• /
• v.42 no.5
• /
• pp.337-351
• /
• 2016

As technologies' life-cycle shortens and their development directions are uncertain, firms' technology planning capability becomes increasingly important. Prior patent-based studies using technology growth curves identify developmental stages of technologies, thereby formulating technology development directions from an overall perspective. However, a technology generally consists of multiple sub-technologies and accordingly their development stages are likely various. In this regard, the prior studies failed to identify core sub-technologies and their specific development directions. Therefore, we suggest an approach consisting of 1) identifying core sub-technologies of a given technology using patent co-classifications and social network analysis, and 2) identifying each sub-technology's development stage and thereby determining its further development direction. We apply our approach to patents related to augmented reality to examine its applicability. It is expected that our approach will help identify evolving development stages for the core sub-technologies of a given technology, thereby effectively assisting technology experts in technology planning processes.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.7 no.2
• /
• pp.1-6
• /
• 2010

A new type fiber optic sensing system has been developed as a commercially available standard using the technique of hetero-core spliced fiber optic sensor, for the purposes of monitoring large scaled structures, preserving natural environments and measuring physical phenomenons. The sensing system has been tested and evaluated in a possible outdoor condition in view of the full scaled operation at actual sites to be monitored. Additionally, the developed system in this work conveniently provides us with various options of sensor modules intended to measure such physical quantities as displacement, distortion, pressure, binary states and liquid adhesion. The experiment study has been performed to examine the performance to a pseudo-cracking experiment in the outdoor situation, and to clarify temperature influences to the system in terms of the coupling of optical connectors and the OTDR stability. It has been verified that the sensing system is robust to the temperature change ranging from the general condition to the hard condition. Especially, in this study, the specification and performances of the pressure sensor have been demonstrated to show the capability of inspecting various physical quantities.

• Journal of computational fluids engineering
• /
• v.19 no.1
• /
• pp.64-72
• /
• 2014

This study aimed at assessing the analysis capability of thermal-hydraulic computer code, MARS for the behaviors of the core make-up tank (CMT). The sensitivity study on the nodalization to simulate the CMT was conducted, and the MARS calculations were compared with KAIST experimental data and RELAP5/MOD3.3 calculations. The 12-node model was fixed through a nodalization study to investigate the effect of the number of nodes in the CMT (2-, 4-, 8-, 12-, 16-node). The sensitivity studies on various parameters, such as water subcooling of the CMT, steam pressure, and natural circulation flow were done. MARS calculations were reasonable in the injection time and the effects of several parameters on the CMT behaviors even though the mesh-dependency should be properly treated for reactor applications.

• Journal of Mechanical Science and Technology
• /
• v.19 no.5
• /
• pp.1182-1193
• /
• 2005

The capability of TRAC-M code to predict downcomer boiling effect during reflood phase in postulated PWR LOCA is evaluated using the results of downcomer effective water head and Cylindrical Core Test Facility (CCTF) experiments, which were performed at JAERI. With a full height downcomer simulator, effective water head experiment was carried out to investigate the applicability of the TRAC-M best estimate LOCA code to evaluate the effective water head with superheated wall temperature in downcomer. In order to clarify the effect of the initial superheat of the downcomer wall on the system and the core cooling behaviors during the reflood phase, two sets of analysis were also performed with a CCTF. Results show that TRAC­M code tends to under-predict downcomer effective water head and core differential pressure. However, the code results show a good agreement with the experimental results in downcomer temperature, heat flux and pressure. Finally, both experiment and calculation showed that the downcomer water head with the superheated downcomer wall is lower than that of the saturated wall temperature.

• Nuclear Engineering and Technology
• /
• v.54 no.3
• /
• pp.803-810
• /
• 2022

The small modular liquid-metal fast reactor (SMFR) is an important component of advanced nuclear systems. SMFRs exhibit relatively low breeding capability and constraint space for control rod installation. Consequently, control rods are deeply inserted at beginning and are withdrawn gradually to compensate for large burnup reactivity loss in a long lifetime. This paper is committed to investigating the impact of control rod compensation operation on core neutronics characteristics. This paper presents a whole core fine depletion model of long lifetime SMFR using OpenMC and the influence of depletion chains is verified. Three control rod position schemes to simulate the compensation process are compared. The results show that the fine simulation of the control rod compensation process impacts significantly the fuel burnup distribution and absorber consumption. A control rod equivalent position scheme proposed in this work is an optimal option in the trade-off between computation time and accuracy. The control position is crucial for accurate power distribution and void feedback coefficients in SMFRs. The results in this paper also show that the pin level power distribution is important due to the heterogeneous distribution in SMFRs. The fuel burnup distribution at the end of core life impacts the worth of control rods.

• Korean Journal of Construction Engineering and Management
• /
• v.21 no.2
• /
• pp.79-87
• /
• 2020

The Korean domestic construction management at risk (CMAR) market is in the process of completing the pilot project execution under the leadership of the Ministry of Land, Infrastructure and Transport as of December 2019. The government starts practicing CMAR an alternative delivery method widely in order to diversify delivery methods and enhance construction technology. The CMAR market is thus expected to grow. This study was conducted to improve CMAR firms' capability by developing self-assessment tools for them to evaluate current capability more effectively. As a result of defining standard core capability and additional elements categorized by project execution phase and management area, and performing evaluation from the CMAR project participants, it was found that the general project management capability in the pre-design and procurement phase and quality management area was lower compared to the construction phase and other areas. In addition, the capability of cost management area was lower in spite of its high importance. Communication and coordination, process optimization, and target values achievement were at the initial level of capability and continuous improvement was required.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.272-281
• /
• 2016

The effective exploitation of resources is critical for startup firms with insufficient resources to compete with well-resourced large firms. The direction and consistency of the resource input should be retained to utilize resources effectively, which will lead to a necessity for a fit between the strength in resources and the strategy of a firm. This study suggests hypotheses and verifies them empirically based on the logic that the attribute of resources in which a firm with a core competence decides the type of strategy and the formulated strategy presents the direction of the resource input, which enables the effective utilization of resources and facilitates high performance. According to the statistical results, the R&D capability affects the innovative differentiation strategy, marketing capability affects marketing differentiation strategy, and financial and production capability affects low cost strategy, in which the efficacy of the strategy depends on the attribute of resources. In addition, the R&D capability and marketing capability adversely affect the low cost strategy and the production capability negatively affects the innovative differentiation strategy, which implies that the exclusive choice of a strategy by the strength in resources results in improved performance. These results show that the fit between the resource and strategy is an essential cause of high performance in venture businesses.