• 미생물학회지
• /
• 제8권1호
• /
• pp.41-51
• /
• 1970

S.albus subsp.와 S.globosus에서 Tetracyclin과 Streptomycin 같은 항생물질을 생성된다는 것은 이미 전보에서 밝힌 바 있다. 이들 두 種의 생장최적조건과 항생제 생성정도와의 관계를 배지성분과 그 농도에 따라 검토하였다. 그 결과 S.albus subsp.와 S.globosus 모두 배양시간이 130~150시간이 될때 항생물질 생성과 균체량이 최고에 달했다. 그리고 PH는 그 근처에서만 떨어지는 현상을 볼 수 있었다. 또한 두 균주 모두 탄소원으로서는 starch(4~5%)질소원으로서는 soybeam meal(1.5~2.0%)에서 균체의 생장도 양호하고 향균력도 높게 나타났다. 이외의 성분으로는 calcium carbonate(2mg/ml), potassium phosphate' dibasic(0.05M~0.01M), magnesium sulfate(0.01M~0.03M) ferric chloride(0.01M)가 가장 생장에 좋은 배지농도로 추정되며 zinc ion(0.0005M)은 균체생장을 현저하게 억제하였다.

• Journal of Oral Medicine and Pain
• /
• 제43권4호
• /
• pp.131-135
• /
• 2018

Purpose: To investigate the correlation between the amount of salivary metal ions released from fixed prostheses and the period of restoration insertion, and to evaluate the correlation between the type and amount of metal ions in saliva and oral lesions (OL). Methods: Based on the oldest prosthesis, we divided patients into two groups: more than 5 years (n=19) and less than 5 years (n=10). Patients were also divided into two groups by another criteria: the one with the presence (n=15), and the one with absence (n=14) of OL, and the amounts of metal ions were examined. Metal ions-gold (Au), copper, cobalt (Co), chromium (Cr), nickel, zinc, aluminum, palladium (Pd), tin, and platinum (Pt)-were measured using laser ablation microprobe inductively coupled plasma mass spectrometry. Results: Significantly higher quantities of Co, Pt, and Pd ions were released in patients with fixed prosthesis of more than 5 years (p<0.05). Measurement of the average amount of salivary metal ions was performed on patients with and without OL - Significantly higher amounts of Cr, Pd and Au ions were released in patients with OL (p<0.05). Conclusions: Old prostheses (${\geq}5years$) released metal ions, and among them were Co, Pt and Pd ions more than others. Patients with OL showed significantly higher levels of ion release, especially Cr, Pd and Au. There was a positive correlation between the amount of a certain kind of released metal ions, especially Pd, and the development of OL. Salivary Pd ion released from old prostheses could affect the pathogenesis of OL; therefore, long-term follow-up is important.

• 대한본초학회지
• /
• 제33권6호
• /
• pp.87-92
• /
• 2018

Objectives: The aim of the study was to analyze the constituents of Pyrolusitum, which was used to eliminate static blood and inflammation, to establish the basis of clinical application. Methods: Qualitative analysis was performed by X-Ray Diffraction (XRD) using the sample as a powder, and the elemental content of granular sample was measured by X-Ray Fluorescence (XRF). 1 M hydrochloric acid and 5% sodium hydroxide aqueous solution were added to observe the changing shape, respectively. Results: Qualitative analysis by XRD revealed that the Pyrolusitum samples used in the study contained quarts and kaolinite. Quantitative analysis by XRF revealed that the manganese content in the samples used in the study was 6.16% on average, while iron was contained the highest amount of 22.99%. The minor constituents include 1.08% of titanium, 0.30% of barium, 0.18% of lead, 0.06% of zirconium, 0.05% of chromium, 0.04% of zinc, 0.03% of cadnium, 0.02% of nickel, 0.01% of arsenic, 0.01% of copper, 0.01% of rubidium, 0.01% of strontium, 0.00% of molybdenum, respectively. And cobalt, which is reported to be a constituent of Pyrolusitum, was not detected at all in the samples of the study. Pyrolusitum was dissolved in dark brown when it was put into 1 M hydrochlorid acid, and there was brown precipitate when sodium hydroxide solution was added to Pyrolusitum and stirred. Conclusions: It was found that manganese and iron were the major constituents of Pyrolusitum, and it could be identified by using concentrated hydrochloric acid and sodium hydroxide solution.

• 한국표면공학회지
• /
• 제55권3호
• /
• pp.180-186
• /
• 2022

The production of hydrogen via water electrolysis (i.e., green hydrogen) using renewable energy is key to the development of a sustainable society. However, most current electrocatalysts are based on expensive precious metals and require the use of highly purified water in the electrolyte. We demonstrated the preparation of a non-precious metal catalyst based on CuCo₂O₄ (CCO) via simple electrodeposition. Further, an optimization process for electrodeposition potential, solution concentration and electrodeposition method was develop for a catalyst-substrate integrated electrode, which indicated the highly electrocatalytic performance of the material in electrochemical tests and when applied to an anion exchange membrane water electrolyzer.

• 분석과학
• /
• 제19권4호
• /
• pp.309-315
• /
• 2006

Two piperazine-templated metal sulfate complexes, $(C_4N_2H_{12})[Ni(H_2O)_6](SO_4)_2$, I and ($C_4N_2H_{12}$) $[Co(H_2O)_6](SO_4)_2$, II, have been synthesized by hydro/solvothermal reactions and their crystal structures analyzed by single crystal X-ray diffraction methods. Complex I crystallizes in the monoclinic system, $P2_1/n$ space group, a=12.920(3), b=10.616(2), $c=13.303(2){\AA}$, ${\beta}=114.09(1)^{\circ}$, Z=4, $R_1=0.030$ for 3683 reflections; II: monoclinic $P2_1/n$, a=12.906(3), b=10.711(2), $c=13.303(2){\AA}$, ${\beta}=114.10(2)^{\circ}$, Z=4, $R_1=0.032$ for 4010 reflections. The crystal structures of the piperazine-templated metal(II) sulfates demonstrate zero-dimensional compound constituted by diprotonated piperazine cations, metal(II) cations and sulfate anions. The structures of complex I and II are substantially isostructural to that of the previously reported our piperazine-templated copper(II) sulfate complex $(C_4N_2H_{12})[Cu(H_2O)_6](SO_4)_2$. The central metal(II) atoms are coordinated by six water molecules in the octahedral geometry. The crystal structures are stabilized by three-dimensional networks of the $O_{water}-H{\cdots}O_{sulfate}$ and $N_{pip}-H{\cdots}O_{sulfate}$ hydrogen bonds between the water molecules and sulfate anions and protonated piperazine cations. Based on the results of thermal analysis, the thermal decomposition reactions of the complex I was analyzed to have three distinctive stages whereas the complex II proceed through several stages.

• 한국의류학회지
• /
• 제33권6호
• /
• pp.853-859
• /
• 2009

각국의 여성용 위생용품의 유해중금속을 비교 평가하기 위하여, 일회용 생리대는 한국 3개사, 일본 2개사, 미국 3개사, 독일 3개사, 중국 2개사의 시료와, 여성용 일회용 탐폰은 한국 1개사, 일본 2개사, 미국 2개사 시료를 대상으로 Cr, Co, Ni, Cu, Cd, Pb의 유해중금속 분석을 행하였다. 여성용 일회용 생리대의 용출실험에서는 Cr, Ni, Cu가 모든 시료에서 검출 되었다. 또한 여성용 일회용 탐폰의 용출실험에서 Cr, Ni, Cu 가 모든 시료에서 검출 되었다. 여성용 일회용 탐폰의 용출실험의 결과는 생리대의 결과값보다 낮은 농도롤 나타내었다. 본 연구에서 분석한 각국 여성용 일회용 위생용품의 유해중금속의 분석값은 Oeko-Tex Standard 100의 규제치와의 비교에서 규제치 이하로 인체유해성은 없는 것으로 판단되어진다.

• 생명과학회지
• /
• 제26권5호
• /
• pp.503-508
• /
• 2016

바이오센서는 간단하고 저렴하게 일차적으로 현장 시료를 분석할 수 있는 장점이 있다. 본 연구에서는 유전자 재조합으로 카드뮴을 검출할 수 있는 미생물 유래 바이오센서를 제작하였다. 이를 위해 카드뮴과 반응하는 CadC 유전자와 관련 프로모터를 PCR로 증폭하고 β-galactosidase 유전자(lacZ)와 결합하고 E. coli BL21 (DE3)에 형질 전환하였다. 이 바이오센서 세포는 카드뮴 존재 하에서 β-galactosidase를 발현하며 기질인 CPRG을 분해하여 붉은색으로 발색된다. 카드뮴 검출용 바이오센서는 카드뮴으로 3시간 유도하였을 때 β-galactosidase 활성의 최고값을 보여주었으며 pH 5에서 가장 좋은 활성도를 나타내었다. 카드뮴 검출용 바이오센서는 0.01 μM에서 10 mM 카드뮴에서 검출범위를 보여주었으며 0.01~10 μM에서 직선관계의 검정선(y= 0.98 X + 0.142, R²=0.98)를 나타내었다. 중금속 중에서 카드뮴과 납에서 높은 반응성을 보여주었으며 수은과 구리에서는 전혀 반응하지 않았으나 주석과 코발트에서도 약간의 반응성을 나타내었다. 카드뮴을 spike 한 폐수에서의 반응이 완충용액에 spike한 것(control)과 비슷하게 나타났다. 이는 카드뮴 검출용 바이오센서가 전처리를 하지 않은 현장시료에서도 반응성을 보여주어 현장시료의 간단하고 저렴한 일차적 검출에 활용될 수 있음을 시사한다.

• 한국자기학회지
• /
• 제14권5호
• /
• pp.196-200
• /
• 2004

고에너지 Nd-Fe-B소결자석 제조용 strip-cast합금의 미세조직을 개선하기 위하여, Nd$_{14}$Fe$_{80}$B$_{6}$6의 기본 조성에 소량의 Cu (0.3 ～ 1.0 at%) Co (0.5 ～ 1.5 at%)를 각각 첨가하고 strip-casting법으로 합금을 제조한 후, 이들 Fe 치환원소의 첨가량 변화가 합금의 상형성, 상분포 및 조직 형성에 미치는 영향을 조사하였다. Cu첨가량이 증가함에 따라 용탕의 유동성이 증가하여 strip 두께가 감소함과 함께 strip표면에 수직한 방향으로의 수지상정 발달이 억제되었으나, Co첨가량이 증가한 경우에는 strip두께의 증가와 함께 strip표면에 수직한 방향으로 수지상정이 잘 발달하여 <001>방향으로의 preferred orientation이 증가하는 경향을 보였다. 이들 Cu와 Co의 첨가는 모두 수지상정을 미세화하는 효과가 있었으나, Cu는 Fe의 정출을 안정화시키는 경향이 있어서 Cu가 함유된 함금에서는 종종 Fe가 종종 정출한 반면, Co는 초정 Fe의 정출을 억제하는 효과가 있었다. 한편, 소량의 Zr (0.3, 0.5 at%)을 첨가하였을 때에는 전체적인 결정립의 조대화와 함께 수지상정의 붕괴를 초래하였다.

• 한국환경보건학회지
• /
• 제28권2호
• /
• pp.117-129
• /
• 2002

Concentration of welding fumes and their components is known to be hazardous to welder and adjacent worker. To determine the generation rates of metals in fumes, $CO_2$ flux cored arc welding on stainless steel was performed in well designed fume collection chamber. Variables were different products of flux cored wire(2 domestic products and 4 foreign products) and input energy(low-, optimal- , high input energy). Mass of welding fumes was determined by gravimetric method(NIOSH 0500 method), and 17 metals were analysed by inductively coupled plasm-atomic emission spectroscopy(NIOSH 7300 method). Flux cored wire tube and flux were analysed by scanning electron microscopy to determine their metal composition. 17 metals were classified by their generation rates. Generation rates of iron, manganese, potassium and sodium were all above 50mg/min at optimal input energy level. Generation rates of chromium and amorphous silica were 25~50mg/min. At 1~25mg/min level, nickel, titanium, molybdenum, and aluminum were included. Copper, zinc, calcium, lead, magnesium, lithium, and cobalt were generated below 1 mg/min. Generation rates of metal components in fumes were influenced by input energy, types of flux cored wire. Flux cored wire was consisted of outer shell tube and inner flux. Iron, chromium, and nickel were the major components of outer tube. Flux contained iron, chromium, nickel, potassium, sodium, silica, and manganese. The use of flux cored wire can increase the hazards by increasing the amounts of fumes formed relative to that of solid wire. The reason might be the direct transfer of elements from the flux, since the flux is fine power. Ratio of metals to the fume of flux cored wire was lower than that of solid wire because non-metal components of flux were transferred. Total metal content of fumes in flux cored arc welding was 47.4(24.3~57.2) percent that is much lower than that of solid wire, 75.9 percent. We found that generation rates of iron, manganese, chromium and nickel, all well known to cause work related disease to welder, increased more rapidly with increasing input energy than those of fumes. To reduce worker exposure to fumes and hazardous component at source, further research is needed to develop new welding filler materials that decrease both the amount of fumes and hazardous components.

• 한국환경보건학회지
• /
• 제43권2호
• /
• pp.103-110
• /
• 2017

Objectives: This study was performed to provide basic data for the re-establishment of standards (criteria) and analytical methods for hazardous metals in nail enamel. Methods: Ten metals (lead; Pb, arsenic; As, cadminum; Cd, antimony: Sb, cobalt; Co, nikel; Ni, copper; Cu, chromium; Cr, aluminum; Al, and mercury; Hg) were measured in 67 commercial nail enamels containing glitter and/or pearls. The content of hazardous metals (excepting Hg) was determined by using an inductively coupled plasma-optical emission spectrophotometer (ICP-OES) after microwave digestion. Mercury content was measured by a mercury analyzer without any preparation. Results: The detected ranges of the intact samples were as follows: $ND-1.756{\mu}g/g$ for Pb, $ND-1.24{\mu}g/g$ for As, ND for Cd, $ND-20.41{\mu}g/g$ for Sb, $ND-12.36{\mu}g/g$ for Co, $ND-7.908{\mu}g/g$ for Ni, $0.088-79.27{\mu}g/g$ for Cu, $0.281-18.54{\mu}g/g$ for Cr, $13.78-3563{\mu}g/g$ for Al, and $ND-0.044{\mu}g/g$ for Hg. After centrifugation, the detected ranges of supernatant were as follows: $ND-0.435{\mu}g/g$ for Pb, $ND-0.504{\mu}g/g$ for As, ND for Cd, $ND-0.035{\mu}g/g$ for Sb, $ND-13.17{\mu}g/g$ for Co, $ND-0.232{\mu}g/g$ for Ni, $0.117-90.07{\mu}g/g$ for Cu, $0.174-2.787{\mu}g/g$ for Cr, and $9.459-1565{\mu}g/g$ for Al. The results of this analysis showed that the levels of heavy metals such as Pb, As, and Sb were much higher in the intact samples than those of supernatant. Conclusion: In the present study, we found that the levels of hazardous metals were significantly different depending on the status of the presence of glitter. Based on the results, we recommend that the product consumer refrain from prolonged application of nail enamel, avoid biting or chewing the nails, and wear gloves during cooking and washing dishes.