Copper(I) chloride와 아빈 계열의 리간드와의 Cu-amine complex 촉매를 사용한 단량체 2,6-dimethlyphenol (DMP)의 산회중합을 통하여 poly (2,6-dimethyl-1,4-phenylene ether) (PPE)를 제조하였다. 중합반응에 있어서 DMP와 촉매의 비율, 다양한 리간드 및 첨가제로서 2,4,6-trimethylphenol(TMP)의 함량 등 여러 반응 변수들의 영향을 분자량측정, 열분석, 및 광학적 특성분석을 통해 조사하였다. DMP의 산화중합에 사용된 다양한 Cu-amine 촉매 system의 중합활성을 비교하기 위하여 oxygen-uptake 실험을 실시하였다. 또한 제조된 PPE의 EDTA 수용액을 사용한 정제 방법을 통하여 잔류촉매 제거가 PPE의 열 안정성에 미치는 효과를 TGA를 통해 확인하였다.
최근 촉매 소각 공정은 휘발성 유기 화합물을 저온(< 450 ℃)에서 고효율(> 95%)로 산화 및 분해하기 위해 상당한 주목을 받고 있다. 많은 귀금속 촉매 물질이 잘 연구되어 사용되고 있으나 단가가 비싸고 위험하다. 본연구에서는 Cu와 Mn 전구체의 공침법을 활용하여 간단하고 손쉬운 합성 방법을 개발함으로써 고활성 및 저비용의 Cu-Mn 바이메탈 촉매를 제조하였다. 촉매 합성은 Cu와 Mn의 조성비를 조절하여 최적화하였다. 최적화된 촉매는 메조포러스 구조로 230.8 m2/g의 넓은 표면적을 나타냈다. 촉매 성능을 입증하기 위해 에틸 아세테이트의 산화 반응에 대해 Cu-Mn 촉매를 테스트했으며, 250 ℃의 저온에서 100%의 높은 전환 효율을 나타내었다.
Proliferation of Nocardia amarae cells in activated sludge has often been associated with the generation of nuisance foams. Despite intense research activities in recent years to examine the causes and control of Nocardia foaming in activated sludge, the foaming continued to persist throughout the activated sludge treatment plants in United States. In addition to causing various operational problems to treatment processes, the presence of Nocardia may have secondary effects on the fate of heavy metals that are not well known. For example, for treatment plants facing more stringent metal removal requirements, potential metal removal by Nocardia cells in foaming activated sludge would be a welcome secondary effect. In contrast, with new viosolid disposal regulations in place (Code o( Federal Regulation No. 503), higher concentration of metals in biosolids from foaming activated sludge could create management problems. The goal of this research was to investigate the metal sorption property of Nocardia amarae cells grown in batch reactors and in chemostat reactors. Specific surface area and metal sorption characteristics of N. amarae cells harvested at various growth stages were compared. Three metals examined in this study were copper, cadmium and nickel. Nocardia amarae strain (SRWTP isolate) used in this study was obtained from the University of California at Berkeley. The pure culture was grown in 4L batch reactor containing mineral salt medium with sodium acetate as the sole carbon source. In order to quantify the sorption of heavy metal ions to N amarae cell surfaces, cells from the batch reactor were harvested, washed, and suspended in 30mL centrifuge tubes. Metal sorption studies were conducted at pH 7.0 and ionlc strength of 10-2M. The sorption Isotherm showed that the cells harvested from the stationary and endogenous growth phase exhibited significantly higher metal sorption capacity than the cells from the exponential phase. The sequence of preferential uptake of metals by N. amarae cells was Cu>Cd>Ni. The specific surFace area of Nocardia cells was determined by a dye adsorption method. N.amarae cells growing at ewponential phase had significantly less specific surface area than that of stationary phase, indicating that the lower metal sorption capacity of Nocardia cells growing at exponential phase may be due to the lower specific surface area. The growth conditions of Nocardia cells in continuous culture affect their cell surface properties, thereby governing the adsorption capacity of heavy metal. The comparison of dye sorption isotherms for Nocardia cells growing at various growth rates revealed that the cell surface area increased with increasing sludge age, indicating that the cell surface area is highly dependent on the steady-state growth rate. The highest specific surface area of 199m21g was obtained from N.amarae cell harvested at 0.33 day-1 of growth rate. This result suggests that growth condition not only alters the structure of Nocardia cell wall but also affects the surface area, thus yielding more binding sites of metal removal. After reaching the steady-state condition at dilution rate, metal adsorption isotherms were used to determine the equilibrium distributions of metals between aqueous and Nocardia cell surfaces. The metal sorption capacity of Nocardia biomass harvested from 0.33 day-1 of growth rate was significantly higher than that of cells harvested from 0.5- and 1-day-1 operation, indicatng that N.amarae cells with a lower growth rate have higher sorpion capacity. This result was in close agreement with the trend observed from the batch study. To evaluate the effect of Nocardia cells on the metal binding capacity of activated sludge, specific surface area and metal sorption capacity of the mixture of Nocardia pure cultures and activated sludge biomass were determined by a series of batch experiments. The higher levels of Nocardia cells in the Nocardia-activated sludge samples resulted in the higher specific surface area, explaining the higher metal sorption sites by the mixed luquor samples containing greater amounts on Nocardia cells. The effect of Nocardia cells on the metal sorption capacity of activated sludge was evaluated by spiking an activated sludge sample with various amounts of pre culture Nocardia cells. The results of the Langmuir isotherm model fitted to the metal sorption by various mixtures of Nocardia and activated sludge indicated that the mixture containing higher Nocardia levels had higher metal adsorption capacity than the mixture containing lower Nocardia levels. At Nocardia levels above 100mg/g VSS, the metal sorption capacity of activate sludge increased proportionally with the amount of Noeardia cells present in the mixed liquor, indicating that the presence of Nocardia may increase the viosorption capacity of activated sludge.
L-ascorbic acid 환원제를 사용하는 무전해 은도금 공정으로 Ag 코팅 Cu 플레이크를 제조하는 과정에서 전처리 방법 및 L-ascorbic acid의 농도에 따른 Ag 코팅층의 균일도 변화와 대기 중 승온에 따른 내산화 특성을 평가하였다. 전처리 방법에 따른 Cu 플레이크 표면 산화층의 제거 정도가 Ag 코팅층의 균일도에 큰 영향을 미치는 것을 관찰할 수 있었고, 플레이크에서의 홀 결함 발생정도도 Ag 코팅 Cu 플레이크의 내산화 특성에 다소 영향을 미쳤다. 또한 L-ascorbic acid 환원제의 농도는 Ag 코팅층의 생성 균일도 및 두께 등에 큰 영향을 미치는 대표 공정변수임을 확인할 수 있었는데, L-ascorbic acid의 농도가 0.04 M일 경우 가장 우수한 품질의 Ag 코팅 Cu 플레이크가 제조되었나, 농도를 0.06 M로 증가시킬 경우 미세한 순수 Ag 입자들의 생성으로 인해 Ag가 코팅되지 않은 Cu 표면 면적이 증가하면서 시료의 내산화 특성을 크게 감소시켰다.
본 연구는 동양의학의 관점에서 혈액의 흐름에 도움이 되는 5종의 한약재를 이용하여 영양성분과 항산화 활성을 분석하고자 한다. 일반 영양성분 중 혈액의 구성성분과 관계되는 단백질, 철분 및 구리의 함량은 하수오 (20.28%, $132.22{\mu}g$/100 g, $26.54{\mu}g$/100 g), 당귀 (16.54%, $98.20{\mu}g$/100 g, 그리고 $32.15{\mu}g$/100 g)및 백작약(18.67%, $62.10{\mu}g$/100 g, 그리고 $20.32{\mu}g$/100 g) 의 함량이 다른 재료에 비해 유의적으로 높은 수준이었고, 총 폴리페놀과 총 플라보노이드 함량은 당귀(157.24 mg GAE/g, 108.97 mg QUAC/g), 하수오(124.17 mg GAE/g, 112.02 mg QUAC/g), 백작약(125.25 mg GAE/g, 65.66mg QUAC/g) 순으로 그 함량이 높았으며, DPPH 라디컬 소거능으로 분석한 항산화 활성은 하수오(0.35 $IC_{50}$ mg/ ml), 당귀(0.68 $IC_{50}$ mg/ ml) 및 백작약(0.72 $IC_{50}$ mg/ ml) 순으로 그 활성이 큰 것으로 나타났다 본 연구는 한약재를 활용하여 동 서 융합적 효능 접근을 시도하고 혈류개선을 위한 천연물 유래 성분의 개발에 기초 자료로 활용 하고자 한다. 또한 이러한 한약재의 혈류개선을 위한 기능성 소재로의 개발 및 활용가치를 알아보고자 한다.
본 연구는 복합부가여과에서 특성방사선을 제거하기 위해 사용되는, 알루미늄 여과판의 효율성을 분석하고자 구리 0.1, 0.2, 0.3 mm에 알루미늄 1 mm 사용 전, 후 에너지 스펙트럼 분석과 화질평가를 실시하였다. GATE를 이용하여 에너지 스펙트럼을 측정하고, 에너지별로 구분하여 평가 하였다. 화질평가는 PSNR, MAE, MSE, CNR, SNR 정성적 평가로는 국가암검진 흉부 평가표의 해상, 대조도 평가 7문항을 이용하였다. 에너지별 스펙트럼의 광자의 질 분석에서 저에너지 영역을 제외하고, 모든 영역 알루미늄 미사용 시 우수하였다. PSNR MAE, MSE, CNR, SNR, 정성적 평가는 알루미늄 미사용 시 같거나 우수했다. PSNR은 30 dB이상으로 모두 의미 있는 수치였고, 정성적 평가에서 T-test 검정은 p>0.05였다. 알루미늄 여과판은 에너지 스펙트럼 분석과 화질 평가에서 사용 전, 후 큰 효과가 없으므로, 디지털 방사선 장비의 보상능력 이용하면 알루미늄 여과판 사용 시 보다 선량 관리가 효과적이라 사료된다.
이 연구는 복합발효미생물을 이용하여 유수지 악취 제거와 유수지 토양에 흡착된 오염물질의 정화효과를 확인하고, 현장 적용성 시험을 바탕으로 토양오염 정화시스템을 개발하기 위한 것이다. 토양 내에 침전된 유기오염물질을 분석하여 악취유발 원인과 토양오염 물질을 확인하였다. 개발된 복합발효미생물과의 혼합발효를 이용하여 악취와 오염물질을 분해하는 것이 가능함을 확인하였으며, 유수지 오염토의 물리 화학적 구성과 토양에 흡착된 오염물질을 확인하여 악취의 원인을 규명하였다. 또한, 복합발효미생물과 유수지토의 혼합실험을 통해 혼합방법에 따른 오염물질 제거효율을 분석하였다. 아울러, 복합미생물을 이용한 악취 제거 방법은 한 종류의 미생물을 이용하는 것보다 오염 제거에 효과적임을 확인하였다. 복합발효미생물을 이용한 방법은 자연정화처리 방법에 비해 악취농도가 2.5배 저감하는 것으로 측정되었으며, 토양으로부터 배출된 간극수의 수질이 개선된 것으로 나타났다. 또한, 복합발효미생물과 유수지 혼합토의 교반실험에서 토양입자 표면에 흡착된 구리와 납이 각각 65%와 66%로 저감되는 것을 확인하였으며, 유기물인 TPH 성분은 85%의 저감 효과가 있는 것을 확인하였다. 복합미생물을 이용한 유수지 오염토의 복원은 교반과 혼합비에 대한 기초자료 축적을 통해 악취와 토양오염을 효율적으로 저감시킬 수 있는 장기적인 정화시스템을 개발하고 적용할 필요가 있다.
The increasing interest in light weight materials coupled to the need for cost -effective processing have combined to create a significant opportunity for aluminum P/M. particularly in the automotive industry in order to reduce fuel emissions and improve fuel economy at affordable prices. Additional potential markets for Al PIM parts include hand tools. Where moving parts against gravity represents a challenge; and office machinery, where reciprocating forces are important. Aluminum PIM adds light weight, high compressibility. low sintering temperatures. easy machinability and good corrosion resistance to all advantages of conventional iron bm;ed P/rv1. Current commercial alloys are pre-mixed of either the AI-Si-Mg or AL-Cu-Mg-Si type and contain 1.5% ethylene bis-stearamide as an internal lubricant. The powder is compacted in closed dies at pressure of 200-500Mpa and sintered in nitrogen at temperatures between $580~630^{\circ}C$ in continuous muffle furnace. For some applications no further processing is required. although most applications require one or more secondary operations such as sizing and finishing. These sccondary operations improve the dimension. properties or appearance of the finished part. Aluminum is often considered difficult to sinter because of the presence of a stable surface oxide film. Removal of the oxide in iron and copper based is usually achieved through the use of reducing atmospheres. such as hydrogen or dissociated ammonia. In aluminum. this occurs in the solid st,lte through the partial reduction of the aluminum by magncsium to form spinel. This exposcs the underlying metal and facilitates sintering. It has recently been shown that < 0.2% Mg is all that is required. It is noteworthy that most aluminum pre-mixes contain at least 0.5% Mg. The sintering of aluminum alloys can be further enhanced by selective microalloying. Just 100ppm pf tin chnnges the liquid phase sintering kinetics of the 2xxx alloys to produce a tensile strength of 375Mpa. an increilse of nearly 20% over the unmodified alloy. The ductility is unnffected. A similar but different effect occurs by the addition of 100 ppm of Pb to 7xxx alloys. The lend changes the wetting characteristics of the sintering liquid which serves to increase the tensile strength to 440 Mpa. a 40% increase over unmodified aIloys. Current research is predominantly aimed at the development of metal matrix composites. which have a high specific modulus. good wear resistance and a tailorable coefficient of thermal expnnsion. By controlling particle clustering and by engineering the ceramic/matrix interface in order to enhance sintering. very attractive properties can be achicved in the ns-sintered state. I\t an ils-sintered density ilpproaching 99%. these new experimental alloys hnve a modulus of 130 Gpa and an ultimate tensile strength of 212 Mpa in the T4 temper. In contest. unreinforcecl aluminum has a modulus of just 70 Gpa.
하수슬러지 소각재에서 인(P)을 회수하기 위해 소각재를 황산 용액으로 추출한 후, 알칼리 물질로 pH를 높이면서 회수되는 인(P)과 불순물인 중금속 함량을 비교하여 최적의 인(P) 회수 조건을 실험하였으며, 이때 산추출액을 재사용하거나, 소각재를 입자크기 별로 구분하였을 때 인(P) 회수효율을 비교하였다. 하수슬러지 소각재로부터 인(P)을 회수하기 위한 조건은 1N 황산 용액으로 L/S비 10, 추출시간 30분으로 하는 것이 최적이었다. 인(P)을 회수하기 위한 적정 pH는 알칼리 물질 첨가량, 회수되는 침전물 내의 중금속 함량 등을 고려하였을 때 pH 5 이전에 생성되는 침전물에서 인(P)을 회수하는 것이 유리한 것으로 판단된다. 소각재 추출액의 재사용율(100, 50%)에 따라 인(P)의 회수율을 각각 14, 21% 증가시켰으나, Zn 함량이 각각 33, 21%, Cu의 함량이 각각 35, 20% 증가되었다. 하수슬러지 소각재를 입자크기별로 4개 구간으로 나누어 실험한 결과 특정 크기 구간의 소각재 만을 인(P) 추출하는데 따른 장점은 없었다. EDTA와 양이온 교환수지 등을 통한 추출액 중의 중금속 제거 효과는 크지 않았다.
본 논문에서는 복합재료로 만들기 위한 전처리 단계에서 수행한 사이징 제거 상태를 영상처리 알고리즘을 적용하여 수치적으로 나타내었고, 전자파 차폐 성능을 높이기 위해서 건식 공정 방식으로 니켈도금 탄소섬유를 제작하였다. 탄소섬유 제조에서 폴리머 종류로 감싸져 나온 사이징은 건식 코팅을 위해서는 제거해야 한다. 사이징이 제거된 상태를 주사 전자현미경(scanning electron microscope, SEM)으로 촬영한 이미지에서 탄소 섬유의 규칙적인 패턴, 즉 상관성을 구함으로써 수치적인 값으로 나타낼 수 있다. 사이징의 제거 방식은 용액, 압축 공기와 용액과 압축공기(하이브리드)로 제거한 SEM 영상에 대하여 제안된 방법을 적용한 결과 하이브리드 방식이 우수함을 확인 할 수 있었다. 그리고 사이징이 제거된 스프레딩 탄소 섬유 롤을 롤투롤 스퍼터 방식으로 니켈도금 탄소 섬유를 제작할 수 있었다. 제작된 30um, 40um과 100um 니켈코팅 탄소섬유에 대해서 전자파 차폐 성능을 측정하였다. 한국산업기술시험원에서 100um 니켈코팅 탄소섬유의 전자파 차폐 성능을 평가한 결과 최저 66.7(dB)에서 최고 73.2(dB)의 전자파 차폐 성능을 보였다. 이것은 구리의 전자파 차폐율과 유사하여 EV/HEV자동차의 케이블로 사용될 수 있다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.