• 한국응용과학기술학회지
• /
• 제16권4호
• /
• pp.307-311
• /
• 1999

Interfacial properties of electrode and organic thin layer is one of the most important factor in performing a Light Emitting Diodes(LED). Phthalocyanine copper was used as a buffer layer to improve interface characteristic, so that device efficiency was improved. In this study, LEDs were fabricated as like structures of Indium-Tin-Oxide (ITO) / N,N' -Diphenyl-N,N'-di(m-tolyl)-benzidine (TPD) / 8-Hydroxyquinoline aluminum(Alq) / Aluminum(Al) and Indium-Tin-Oxide(ITO) / N,N'-Diphenyl-N,N' -di(m-tolyl)-benzidine(TPD) / 2-(4-Biphenylyl)-5(4-tert-butyl-phenyl)-1,3,4-oxadiazole(PBD) / Aluminum(Al). In these devices, CuPC was layered at electrode/organic layer interface. As position is changing and thickness is changing, devices showed characteristic luminescence efficiency and luminescence inensity respectively. We showed in this study that luminescence efficiency was improved with CuPC layer in LEDs. The efficiency of device with layer CuPC is higher than that of 2 layer CuPC. However, the luminescence of 2 layer CuPC device got higher value.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.142.2-142.2
• /
• 2016

The metal intercalation to an organic semiconductor is of importance since the charge transfer between a metal and an organic semiconductor can induce the highly enhanced conductivity for achieving efficient organic electronic devices. In this regard, the changes of the electronic structure of copper phthalocyanine (CuPc) caused by the intercalation of potassium are studied by ultraviolet photoemission spectroscopy (UPS) and density functional theory (DFT) calculations. Potassium intercalation leads to the appearance of an intercalation-induced peak between the highest molecular occupied orbital (HOMO) and the lowest molecular unoccupied orbital (LUMO) in the valence-band spectra obtained using UPS. The DFT calculations show that the new gap state is attributed to filling the LUMO+1, unlike a common belief of filling the LUMO. However, the LUMO+1 is not conductive because the ${\pi}$-conjugated macrocyclic isoindole rings on the molecule do not make a contribution to the LUMO+1. This is the origin of a metal-insulator transition through heavily potassium doped CuPc.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.317-318
• /
• 2008

Cu-Pc유기물 반도체를 얼 진공증착기술로 유리기판위에 40 nm 두께로 적층하였다. 상온에서 적층한 박막과 상온에서 적층한 후 $250^{\circ}C$ 이상의 온도로 후열 처리한 박막과 박막 적층 시 기판의 온도를 $250^{\circ}C$로 고정하여 적층한 박막들을 상호 비교 분석하였다. 적층된 Cu-Pc의 박막의 온도조건에 따라 X-ray diffraction(XRD)의 결정 특성이 $\alpha$-phase와 $\beta$-phase로 뚜렷이 구분되었으며， 자외선-가시광선 영역의 광 흡수도(UV-visible absorption spectra)와 field emission scanning electron microscopy(FE SEM)를 이용하여 결정성장 방향 및 표면 특성 변화를 비교조사하였다.

• Progress in Superconductivity
• /
• 제4권2호
• /
• pp.99-103
• /
• 2003

We studied the nonequilibrium superconductivity due to tunnel injection of polaronic quasiparticle (QP) from organic photoconductor. The transport properties of an organic copper (II) phthalocyanine (Cu -Pc)/d-wave superconductor were investigated in dark and under ultraviolet (UV) radiation for performance of a novel $high -T_{c}$ superconducting three terminal device. We observed that the injection of polaronic QP from the organic Cu -Pc film into the $Bi_2$S $r_2$$CaCuO_{8+{\delta}}$ film generated a substantially larger nonequilibrium effect as compared to the normal QP injection current. We could increase the current gain by UV excitation of the organic photoconductor injector. The tunneling spectroscopy of a Cu -Pc/BSCCO junction exhibited a small enhancement of the zero bias conductance peak under the W excitation. The above phenomena are of importance in developing optically controlled three terminal superconducting device.e.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.724-726
• /
• 2004

Highly efficient blue organic light-emitting devices (OLEDs) utilizing the idea of copper phthalocyanine (CuPc)/N,N'-bis-(1-naphthyl)-N,N'-diphenyl,1,1'-biphenyl- 4,4'-diamine (NPB) composite hole transport layer (CPHTL) have been fabricated. The effect of inserting CPHTL upon the performance of blue OLEDs with 2-methyl-9,10-di(2-naphthyl)anthracene (MADN) as the blue emitter has been investigated. Compared with the luminous efficiency of the standard blue device without CPHTL (1.33 cd/A), that of the device with 40:60 CuPc/NPB CPHTL has been increased by more than twice up to 2.96 cd/A with a Commission Internationale d'Eclairage (CIE) coordinates of(x = 0.15, y = 0.10) and a power efficiency of 1.46 lm/W (20 mA/$cm^2$) at 6.39 V. The increased device efficiency is attributed to an improved balance between hole and electron currents arriving at the recombination zone.

• 한국인쇄학회지
• /
• 제9권1호
• /
• pp.27-44
• /
• 1991

In this research, double-layered photoconductor consist of the carrier generation layer(CGL) of ${\varepsilon}$ type copper phthalocyanine thin film by an aqueous coating method and the carrier transport layer(CGL) of polyvinyl carbazol(PVK) by spin coating. We inverstigated effect of the surfactant solution and cathod electrolysis to the crystal type of ${\varepsilon}$-CuPc in CGL with TEM, SEM and X-ray diffraction spectroscopy and studied the mechanism of an aqueous coating for the preparation of CGL. The effect of the washing of CGL about the electrophotographic characteristics of the ${\varepsilon}$-CUPC/PVK double-layered photoconductors is studied also.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.1074-1078
• /
• 2004

열 중착 방법을 이용하여 copper(II)-phthalocyanine(CuPc) 박막을 glass 기판 위에 제작하였다. 박막은 열처리를 하지 않은 경우와 열처리 조건을 $150^{\circ}C$ 로 후열(annealing) 처리 하는 방식으로 하였으며 후열 처리한 경우 $150^{\circ}C$에서의 열처리 지속 시간을 각각 2시간, 3시간, 4시간으로 달리하였다. 제작된 박막의 전기전도도를 평가하기 위해 마이크로파의 근접장 효과를 이용한 근접장 현미경(near-field scanning microwave microscope)을 이용하여 비파괴적인 방식으로 CuPc 박막의 반사계수(reflection coefficient)를 측정하였다. CuPc 박막의 전기전도도 특성을 UV 흡수도를 통한 HOMO(highest occupied molecular orbital), LUMO(lowest unoccupied molecular orbital) 준위의 밴드갭의 shift 현상과 관련지어 설명하였다. 박막 표면 특성은 SEM(scanning microscope microscopy)을 통해 관측하였다. 열처리 지속 시간에 따른 CuPc 박막의 전기전도도 특성은 2시간으로 지속한 경우의 박막의 경우 가장 좋았으며 그 보다 더 오랜 시간 동안 열처리를 지속한 경우에는 전기 전도 특성이 오히려 나빠짐을 알 수 있었다.

• 한국인쇄학회지
• /
• 제8권1호
• /
• pp.1-20
• /
• 1990

$\alpha$,$\beta$,$\varepsilon$ type copper phthalocy $\alpha$,$\beta$,$\varepsilon$ type copper phthalocyanine(CuPc) pigment was purified by a simple train sublimation technique. The layered photoconductor was made with $\varepsilon$ type CuPc as a carrier generation layer(CGL) and polyvinly carvazol(PVCz) as a carrier transport layer(CLT). A CGL of CuPc was electrochemical deposited on an Al substrate used as cathode in pigment dispersion solutions. a CTL of PVCz pwas spin coated on $\varepsilon$ type CuPc thin film by a spin coater. The effect of sonication time, electrophotographic property of the layered photoconductor were studied with surface coverage, surface potential and sensitivity.

• 한국표면공학회지
• /
• 제29권6호
• /
• pp.673-677
• /
• 1996

Copper phthalocyanine(CuPc) thick film solar cells were fabgricated byspin coating and their photovoltaic behavior was studied. Polyvinylidene fluoride (PVdF) was used for the binder. Aluminum and indium were employed as electrode metals to form Schottky contact to CuPc layer. The cells showed rectifying J-V characteristics in the dark and photovoltaic effect associated with white light irradiation. The photovoltaic performance of the cells strongly depended on contact metals, in which the formation of oxide layer between binder layer and electrode interface affected the solar cell. Influnce of the CuPc layer thickness, CuPc/PVdF ratio on the photovoltaic performance of the cells were also examined.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.279-280
• /
• 2009

Organic field-effect transistors (OFETs) are of interest for use in widely area electronic applications. We fabricated a copper phthalocyanine (CuPc) based field-effect transistor with different metal electrode. The CuPc FET device was made a top-contact type and the substrate temperature was room temperature. The source and drain electrodes were used an Au and Al materials. The CuPc thickness was 40nm, and the channel length was $50{\mu}m$, channel width was 3mm. We observed a typical current-voltage (I-V) characteristics in CuPc FET with different electrode materials.