• Journal of the Korean Society of Groundwater Environment
• /
• v.5 no.1
• /
• pp.30-36
• /
• 1998

For successful soil flushing process selection of appropriate flushing reagents is essential. Futhermore, obtaining operating parameters for site remediation application through various bench-scale tests is also important. In this research a series of organic acids (acetic, citric, oxalic, and succinic acids) were tested for flushing capability. Copper-contaminated natural soil was used as a test medium, and flushing experiments were performed with batch system. All the organic acids used did not provide effective flushing conditions at concentration of 1 mM. At the acid concentration of 50 and 100 mM copper was removed efficiently although 50 and 100 mM did not show any significant differences in removal efficiencies. Citric acid and oxalic acid removed copper more efficiently than the others, and especially, citric acid showed over 87% of removal efficiency of copper at near neutral pH of 5 to 7. Speciation of extracted copper using GEOCHEM simulation showed majority of extracted copper existed as complexed with organic acids and only small portion of organic acids were complexed with copper indicating promising application of soil flushing with organic acid to heavy metal-contaminated site remediation.

• Journal of the Korean Society of Industry Convergence
• /
• v.13 no.4
• /
• pp.191-196
• /
• 2010

This study explores the solution of a variety of conditions of the natural dyeing with the Mulberry. To obtain this, the Cu complex compound was added into the extracts. The Mulberry extract was added the Copper acetate to obtain the Black sediment the metal complex compound of anthocyanidin. According to the result of using the complex compound of the solid material, the dyeing properties were excellent. The metal complex compound acted as a mordant, thus it reduced the process of mordanting in the natural dying.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.10
• /
• pp.1593-1596
• /
• 2006

The polymeric membrane electrodes based on N,N'-bis-pyridin-2-ylmethylene-naphthalene-1,8-diamine as an ion carrier were prepared and tested for the copper-ion selective electrode. The membrane has a linear dynamic range between $10^{-6}$ and $10^{-2}$ M with a Nernstian slope of 29.6 mV per decade, and its detection limit was $10^{-5.62}$M. The potentiometric response is independent of the pH range of 3-5. The proposed electrode showed good selectivity and response for $Cu^{2+}$ over a wide variety of other metal ions in pH 4.0 buffer solutions.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.8
• /
• pp.2256-2260
• /
• 2013

A new quinoline-based acylhydrazone (1) has been synthesized and applied as a fluorescent probe. Probe 1 exhibits high selectivity and sensitivity to $Cu^{2+}$ with fluorescence "ON-OFF" behavior in HEPES buffered (1‰ DMSO, HEPES 20 mM, pH = 7.4) solution. The on-site generated 1-$Cu^{2+}$ complex displays excellent selectivity to sulfide ions with fluorescence "OFF-ON" performance through copper displacement approach.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.1
• /
• pp.49-52
• /
• 2011

A dinuclear copper(II) complex of [$Cu_2(aceace)_4$(dipyph)] [aceace = acetylacetone, dipyph = 1,4-di(4-pyridylethene-2-yl-)benzene] has been synthesized and characterized by elemental analysis, IR and X-ray single crystal diffraction. It crystallizes in the monoclinic system, space group P21/c, with lattice parameters a = 7.9584(16) $\AA$, b = 18.594(4) $\AA$, c = 15.063(4) $\AA$ $\beta=120.97(2)^o$ and $M_r$ = 807.85 ($C_{40}H_{44}Cu_2N_2O_8$), Z = 2. Each of the $Cu^{2+}$ ion adopts a square pyramid geometry and coordinates with four oxygen atoms from two aceace ligands and one nitrogen atom from dipyph bidentate ligand. Magnetic measurement shows that the Weiss constant and Curie constant for the title compound are -0.22 K and 0.1154 emu K/mol, respectively. Thermal stability data indicate that the title complex undergoes two steps decomposition and the residue is $Cu_2O_4$. In the potential range of -1.5 ~ 0.8 V, the title complex represents an irreversible electrochemical process.

• Resources Recycling
• /
• v.16 no.6
• /
• pp.39-45
• /
• 2007

Optimum condition for neutralization has been studied to remove the copper and zinc ions from spent sulfate solutions which resulted from the acid washing of the base of brass bulb. Chemical distribution of copper and zinc species and the variation of solubility of the two ions with solution pH were obtained by considering the complex formation reaction and mass balance. Removal percentage of zinc was more sensitive to solution pH than that of copper. This results from the fact that the solubility of zinc is higher than that of copper. The form of coagulant affected little the removal percentage of zinc, while addition of coagulant as the phase of solution resulted in higher removal percentage of copper than as the phase of solid.

• Journal of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.51-56
• /
• 1986

Polarographic behavior of cadmium(II) and copper (II) complexes of 1,5-diphenylcarbohydrazide in dimethylsulfoxide have been investigated by the DC polarography. The reduction processes are estimated as follows; Cd(II)${\cdot}$DPH Complex$\frac{e^-}{(E_{\frac{1}{2}}=-0.12V)}$${\to}$Cd(I)${\cdot}$DPH Complex. Cd(I)${\cdot}$DPH Complex$\frac{e^-}{(E_{\frac{1}{2}}=-0.74V)}$${\to}$Cd(Hg) + nDPH. Cu(II)${\cdot}$DPH Complex$\frac{e^-}{(E_{\frac{1}{2}}=-0.44V)}$${\to}$Cu(I)${\cdot}$DPH Complex. Cu(I)${\cdot}$DPH Complex$\frac{e^-}{(E_{\frac{1}{2}}=-0.84V)}$${\to}$Cu(Hg) + nDPH. The limiting currents of all reduction wave are irreversible. The number of ligand and the dissociation constant for Cu(I)${\cdot}$1.5-diphenylcarbohydrazide complex were found to be 2 and 5.12 ${\times}10^{-8}$, respectively. All reduction waves of complexes are irreversible. Based on the experimental results, the polarographic reductions of complexes in dimethylsulfoxide solution occurred in two one-electron steps.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.5
• /
• pp.406-409
• /
• 1995

The complex formation from Cu(Ⅱ) ion and 2,2-bis(hydroxymethyl)-2,2',2"-nitrilotriethanol (Bistris) in aqueous solution has been studied potentiometrically and spectrophotometrically. Bistris (L) coordinates to Cu(Ⅱ) as tridentate. The complex CuL2+ undergoes deprotonation in neutral and basic media. The deprotonated complexes involve metal-alcoholate coordinate bond in stable chelate structures.

• Journal of the Korean Chemical Society
• /
• v.42 no.3
• /
• pp.292-296
• /
• 1998

The elution behavior of copper(Ⅱ) and iron(Ⅱ) ions by phenol sulfonic acid(PSA) as an eluent on chelating resin, Amberlite IRC-718 have been investigated. When copper(Ⅱ) and iron(Ⅱ) solutions were adsorbed on the resin and eluted with various concentration of PSA, two peaks of each ion were appeared in the elution curve. These two peak areas were changed according to the PSA concentration. Using these phenomena, the stability constants of complex formation between the two ions and PSA were calculated. The values are 7.0 for copper(II) and $4.5{\times}10^4$ for iron(II), respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• v.11 no.1
• /
• pp.72-79
• /
• 1987

When the wall temperature is very high, a stable vapor film covers the heat transfer surface. The vapor film creates a strong thermal resistance when heat is transferred to the liquid though it. This phenomenon, called "film boiling" is very important in the heat treatment of metals, the design of cryogenic heat exchangers, and the emergency cooling of nuclear reactors. In the practical engineering problems of the transient cooling process of a high temperature wall, the wall temperature history, the variation of the heat transfer coefficients, and the wall superheat at the rewetting points, are the main areas of concern. These three areas are influenced in a complex fashion such factors as the initial wall temperature, the physical properties of both the wall and the coolant, the fluid temperature, and the flow state. Therefore many kinds of specialized experiments are necessary in the creation of precise thermal design. The object of this study is to investigate the heat transfer characteristics in the transient cooling process of a high temperature wall. The slow transient cooling experiment was carried out with a copper block of high thermal capacity. The block was 240 mm high and 79 mm O.D.. The coolant flowed throuogh the center of a 10 mm diameter channel in the copper block. In the copper block, three sheathed thermocouples were placed in a line perpendicular to the flow. These thermocouples were used to take measurements of the temperature histories of the copper block.