• 한국환경과학회지
• /
• 제23권9호
• /
• pp.1583-1591
• /
• 2014

PVA-D2EHPA/TOPO beads containing two extractants, di-(2-ethylhexyl) phosphoric acid (D2EHPA) and trioctylphoshine oxide (TOPO) were prepared for the removal of copper ions from aqueous solution. The prepared PVA-D2EHPA/TOPO beads were characterized by SEM and FT-IR. The removal characteristics of copper ions by PVA-D2EHPA/TOPO beads was investigated using batch and continuous systems. In batch experiments, the maximum removal capacity calculated from Langmuir isotherm model was 18.6 mg/g and the optimal pH was in the range of 4.5~6. The continuous experiments showed that the removal capacity of copper ions increased with increasing inlet copper ion concentrations and bed heights, but decreased with increasing inlet flow rates.

• 청정기술
• /
• 제20권3호
• /
• pp.251-255
• /
• 2014

테노일트리플루오로아세톤(thenoyltrifluoroacetone, HTTA)과 트리옥틸포스핀옥사이드(trioctylphoshineoxide, TOPO)를 폴리비닐알콜(poly vinyl alcohol, PVA)로 고정화한 PVA 겔 비드를 제조하고, 이를 사용하여 수중의 $Cu^{2+}$를 제거하였다. 제조한 PVA 겔 비드의 $Cu^{2+}$ 제거특성은 유사 2차 속도식에 잘 적용되었으며, 랑미어 등온식에서 구한 $Cu^{2+}$의 최대 제거량은 9.59 mg/g이었다. $Cu^{2+}$ 제거의 최적 pH 범위는 pH 3.5~6이었다. PVA겔 비드를 5차례 재사용한 경우에도 추출제의 손실이나 PVA겔 비드의 손상은 관찰되지 않았다.

• 한국미생물·생명공학회지
• /
• 제41권1호
• /
• pp.60-69
• /
• 2013

Purified melanin pigment from Klebsiella sp. GSK was characterized by thermogravimetric, differential thermal, X-ray diffraction and elemental analysis. This melanin pigment is structurally amorphous in nature. It is thermally stable up to $300^{\circ}C$ and emits a strong exothermic peak at $700^{\circ}C$. Its carbon, hydrogen and nitrogen composition is 47.9%, 6.9% and 12.0%, respectively. It was used to scavenge metal ions and free radicals. After immobilizing the pigment and using it to adsorb copper and lead ions, the metal ion adsorption capacity was evaluated by atomic absorption spectroscopy (AAS) and the identity of melanin functional groups involved in the binding of metal ions was determined by Fourier transform infrared (FT-IR) spectroscopy. Batch adsorption studies showed that 169 mg/g of copper and 280 mg/g of lead were adsorbed onto melanin-alginate beads. The metal ion adsorption capacity of the melanin-alginate beads was relatively significant compared to alginate beads. The metal ion desorption capacity of HCl was greater (81.5% and 99% for copper and lead, respectively) than that of EDTA (80% and 71% for copper and lead, respectively). The ability of the melanin pigment to scavenge free radicals was evaluated by inhibition of the oxidation of 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) and was shown to be about 74% and 98%, respectively, compared with standard antioxidants.

• 박물관보존과학
• /
• 제26권
• /
• pp.67-82
• /
• 2021

국립부여박물관 소장 금제구슬 2점(부여5336)은 1993년 부여 능산리 공방터 주변에서 발견된 것으로 백제 시대에 제작된 누금제품이라는 희소성과 완형의 형태를 갖추고 있어 제작기법을 살펴볼 수 있는 매우 중요한 자료이다. 본 연구에서는 이동형 엑스선형광분석기와 실체현미경 및 분광분석기 부착 주사전자현미경 분석을 통해 금제구슬의 성분 조성을 확인하고 미세 형태와 표면 상태 관찰, 접합 부위 성분 분석을 통해 제작 기법을 살펴보았다. 금제구슬은 속이 비어있는 형태로 구멍을 뚫은 뒤 그 주변을 금선으로 둘러 장식하였으며 나머지 부분을 금알갱이로 장식하였다. 일부에서 금알갱이를 먼저 금판에 접합하고 금알갱이 위에 금선이 올라간 형태를 확인할 수 있었으며 금선과 금알갱이 모두 23.6K~23.7K로 분석되었다. 누금의 접합 부위 일부에서는 구리의 함량이 높게 검출되었으며 재현 실험 및 제작 방법 연구 결과를 참고로 하여 볼 때 구리확산법을 사용하여 제작한 것으로 추정된다.

• 한국환경과학회지
• /
• 제25권11호
• /
• pp.1485-1491
• /
• 2016

PSf/D2EHPA/CNT beads were prepared by immobilizing di-(2-ethylhexyl)-phosphoric acid (D2EHPA) and carbon nanotubes (CNT) on polysulfone (PSf) and used to remove Cu(II) from aqueous solutions. Optimum pH was in the range of 4 to 6. The removal kinetic of Cu(II) by the prepared PSf/D2EHPA/CNT beads was mainly governed by internal diffusion, and the diffusion coefficient of Cu(II) by PSf/D2EHPA/CNT beads was found to be $2.19{\times}10^{-4}{\sim}2.64{\times}10^{-4}cm^2/s$. The Langmuir isotherm model predicted the experimented data well. The maximum removal capacity of Cu(II) obtained from this isotherm was 7.32 mg/g. Calculated thermodynamic parameters such as ${\Delta}G^o$, ${\Delta}H^o$ and ${\Delta}S^o$ showed that the adsorption of Cu(II) ions onto PSf/D2EHPA/CNT beads was feasible, spontaneous and endothermic at 293-323 K.

• 한국환경과학회지
• /
• 제27권12호
• /
• pp.1215-1226
• /
• 2018

In this study, PAN-SZ (polyacrylonitrile scoria zeolite) beads were prepared by immobilizing Na-A zeolite (SZ-A) synthesized from Jeju volcanic rocks (scoria) on the polymer PAN. FT-IR and TGA analysis results confirmed that the SZ-A was immobilized in the PAN-SZ beads. SEM images showed that the PAN-SZ beads are a spherical shape with 2 mm diameter and exhibit a porous inner structure inside the bead. The most suitable mixing ratio of PAN to SZ-A as the adsorbent for removing Sr ions was PAN/SZ-A = 0.2 g/0.3 g. The adsorption kinetic data for Cu and Sr ions were fitted well with the pseudo-second-order model. The Cu and Sr ion uptakes followed a Langmuir isotherm model and the maximum adsorption capacities at $20^{\circ}C$ were 84.03 mg/g and 75.19 mg/g, respectively. The amount of Sr ion adsorbed by SZ-A on the PAN-SZ beads was about 160 mg/g, which was similar to that adsorbed by SZ-A powder. Thus, the PAN-SZ beads prepared in this study are considered to be effective adsorbents for removing metal ions in aqueous solutions.

• 조명전기설비학회논문지
• /
• 제22권3호
• /
• pp.52-58
• /
• 2008

The importance of. identifying the causes of electrical faults cannot be overstated because of the accidents caused by over-current that take place at the home, the office and electrical facilities due to misuse, poor products and system faults. It is necessary to gather objective, scientific data pertaining to electrical fault investigation in a product liability(PL) environment. To date, no database(DB) has been built concerning the accurate cause analysis of faultyfacilities. In this paper, accident hazard and arc scattering when over-current flows in copper wire was investigated. It was found that when over-current flows in a copper wire, the copper wire became heated and bent and beads were scattered around the wire with a flash. It was determinedthat the fusing current and time was related to the current rise per second. For example, when the current rise per second was largethe fusing current was higher than when the current rise per second was small, and the beads dispersed along a wide area. Fusing time, however, was shorter. The possibility of electrical fault became highest when the fusing current was higher. As the current rise per second is short, the dendrite structure is distributed in the surface of the copper wire. These experimental results can be utilized for a fault process DB system in the investigation and the prevention of electrical faults.

• 보존과학회지
• /
• 제31권3호
• /
• pp.255-265
• /
• 2015

본 연구에서는 지금까지 자연과학적 분석을 통해 확인된 30개 유적의 281점 포타쉬유리에 대하여 화학 조성에 따라 유형을 분류하고 색상, 크기, 제작 기법 그리고 유통 시기를 비교하였다. 한국의 포타쉬유리는 안정제 함량에 따라 3가지 유형으로 구분된다. I, II형은 CaO와 $Al_2O_3$ 함량이 모두 5% 미만으로 상대적으로 I형은 CaO 함량이 높고 II형은 $Al_2O_3$ 함량이 높다. 이와 달리 III형은 CaO를 5% 이상 포함한다. 이들은 융제를 첨가하기 위해 I, II형이 초석, III형이 식물 재를 원료로 사용한 것으로 추정된다. 유형별 특성에서, I형은 감청색, 벽색 및 청록색, 자색을 띠고 외경이 1.4~7.4mm까지 다양한 크기가 확인된다. 늘인 기법에 의해 제작되었으며 가장 빠른 BC 1C경 출현하여 AD 6C까지 지속적으로 유통된 것으로 나타났다. 반면 II형은 벽색 및 청록색을 띠며, 외경이 1.9~3.6mm 정도의 소형 구슬이다. 제작 기법은 I형과 동일하며 AD 1C경 나타나 4C경 단절되는 양상을 보인다. 마지막으로 III형은 갈색, 무색, 황색을 띠며 외경이 대략 10mm 전후에 달하는 대형 구슬이다. 말은 기법에 의해 성형되었으며 고려 및 조선시대 민묘에서 등장한다. 이상의 결과에서 한국에서 유통된 3가지 유형의 포타쉬유리는 각기 다른 생산지에서 다양한 교역 루트를 통해 유입된 것으로 판단된다.

• 한국환경과학회지
• /
• 제25권12호
• /
• pp.1613-1622
• /
• 2016

Zeolite (FZ), prepared from fly ash, was immobilized with polyacrylonitrile (PAN) to fabricate PAN/FZ beads. The prepared PAN/FZ beads were characterized by scanning electron microscopy, thermogravimetric analysis, and Fourier transform infrared spectroscopy. The optimum ratio to prepare PAN/FZ beads was 0.3 g of PAN to 0.3 g of FZ. The diameter of the prepared PAN/FZ beads was about 3 mm. Sr and Cu ion adsorption experiments were conducted with PAN/FZ beads. A pseudo-second-order model fit the kinetic data for Sr and Cu ion adsorption by PAN/FZ beads well. The equilibrium data fitted well with the Langmuir isotherm model, and the maximum adsorption capacities were 96.5 mg/g and 74.6 mg/g for the Sr and Cu ions, respectively. Additionally, the values of thermodynamic parameters such as Gibbs free energy (${\Delta}G^o$), enthalpy (${\Delta}H^o$) and entropy (${\Delta}S^o$) were determined. The positive values of ${\Delta}H^o$ revealed the endothermic nature of the adsorption process and the negative values of ${\Delta}G^o$ were indicative of the spontaneity of the adsorption process.

• 한국환경과학회지
• /
• 제25권12호
• /
• pp.1623-1632
• /
• 2016

Zeolite (FZ) prepared using coal fly ash from an Ulsan industrial complex was immobilized with polysulfone (PS) to fabricate PS-FZ beads. The prepared PS-FZ beads were characterized by scanning electron microscopy and Fourier transform infrared spectroscopy. The optimum ratio for preparing PS-FZ beads was 1 g of PS to 2 g of FZ. The removal efficiencies of Sr and Cu ions by the PS-FZ beads increased as the solution pH increased and nearly reached a plateau at pH 4. A pseudo-second-order model morel fit the adsorption kinetics of both ions by the PS-FZ beads better than a pseudo-first-order model. The Langmuir isotherm model fit the equilibrium data well. The maximum adsorption capacities calculated from the Langmuir isotherm model were 46.73 mg/g and 62.54 mg/g for the Sr and Cu ions, respectively. Additionally, the values of thermodynamic parameters such as free energy (${\Delta}G^{\circ}$), enthalpy (${\Delta}H^{\circ}$) and entropy (${\Delta}S^{\circ}$) were determined. The results implied that the prepared PS-FZ beads could be interesting an alternative material for Sr and Cu ion removal.