• Journal of Electrochemical Science and Technology
• /
• 제3권4호
• /
• pp.165-171
• /
• 2012

An experimental study of mass transfer to an amalgamated copper rotating disc electrode has been employed to determine an empirical correlation for the mass transfer rate in laminar flow. The study was performed in a three-electrodes configuration using 0.1 M boric acid and 0.1M potassium chloride as supporting electrolyte with Zn (II) concentration in the range (25-100 mg $dm^{-3}$). Polarization curves at different zinc ion concentration are reported. Hydrogen and oxygen reduction has also been considered.The diffusion coefficients and mass transfer coefficient were obtained using limiting diffusion current technique based on zinc ion reduction. A least squares analysis indicates that the laminar flow results for 13067 < Re > 57552 and 550 < Sc > 1390 can be correlated by the following equation with correlation coefficient (CR) equal to 0.98: $sh=0.61Re^{0.5}Sc^{1/3}$.

• 대한미생물학회지
• /
• 제35권1호
• /
• pp.1-8
• /
• 2000

In order to explore the potential of ascorbic acid supplementation for the prevention and treatment of herpes simplex viral diseases, plaque reduction assays were performed. Ascorbic acid as well as copper chloride/ferric chloride were added to wells containing Vero cells infected with herpes simplex virus type 1 (HSV-1), and the infectivity of HSV-1 was determined. Since copper and iron are major transition metals in human plasma, near the normal human plasma concentrations of them were used for experiments. When Cu(II) and Fe(III) were applied, there were no significant differences between virus control and Cu(II)/Fe(III)-treated groups. But, when appropriate concentrations of ascorbic acid were added to wells, meaningful differences between control and ascorbate-treated groups were found. In the presence of Cu(II)/Fe(III) at $5.8/3.7\;{\mu}M$, 72-h treatment with ascorbate at $50\;{\mu}M$ reduced HSV-1 infections to $10.77%{\pm}4.25%$ (P < 0.001) and $500\;{\mu}M$ did to $3.06%{\pm}1.62%$ (P < 0.001). Moreover, the cytotoxicities for Vero cells at those concentrations were insignificant (P > 0.05). Current recommended dietary allowance (RDA) of ascorbic acid is 60 mg/day, and the oral intake of 60 mg/day of ascorbic acid yields plasma ascorbic acid at 45 to $58\;{\mu}M$ in a healthy adult man. Therefore, the results of this study suggest that the maintenance of appropriate level (more than $50\;{\mu}M$) of ascorbic acid in human plasma by appropriate amount (more than the RDA) of ascorbic acid supplementation may be helpful for the prevention and treatment of diseases caused by HSV -1 in an adult man. In addition, this study also suggests that ascorbic acid may be useful for the prophylaxis of fatal HSV-1 infections in neonates and the prevention of HSV-1 reactivation in immunocompromised hosts.

• 복식문화연구
• /
• 제16권1호
• /
• pp.158-165
• /
• 2008

The purpose of this study was to investigate the dyeing property and ultraviolet-cut ability on silk 100% and nylon 100% fabrics dyed with Rhus verniciflua extracts. This study was investigated K/S values, surface color, washing fastness, dry cleaning fastness and ultraviolet-cut ability of the silk and nylon fabrics dyed with Rhus verniciflua extracts under the various dyeing conditions. As mordanting were used Tin(II) Chloride dihydrate $(SnCl_2{\cdot}2H_2O)$, Copper(II) sulfate pentahydrate$(CuSO_5{\cdot}5H_2O)$, Iron(II)Chloride$(FeC_2{\cdot}4H_2O)$. pH was adjusted by sodium carbonate$(Na_2CO_3)$ and formic acid(HCOOH). The optimum dyeing temperature, dyeing time, and pH of the silk fabrics dyed with Rhus verniciflua extracts were $90^{\circ}C$, 100min, and in the nylon fabrics were $90^{\circ}C$, 45min. It were colored(munsell value) 6.4Y 7.5/4.1 in the silk fabrics and colored 4.3Y 6.6/5.9 in the nylon fabrics dyed with Rhus verniciflua extracts. Washing fastness and dry-cleaning fastness in the silk and nylon fabrics dyed with mordanting agent improved in $4{\sim}5$ grade. UV-A test showed that nylon fabrics a high rate of 92% with Rhus verniciflua extracts.

• 한국결정학회지
• /
• 제16권2호
• /
• pp.107-127
• /
• 2005

Five Cu(II) compounds were obtained from different copper salts with btp ligands, and their structures were determined by X-ray crystallography. The structure of coordination polymer 2 contains btp-bridged tetranuclear Cu(II) units weakly connected by nitrate ions, and the structure of a discrete Cu(II) molecule 1 contains acetates and btp ligands. With perchlorate anions, two btp ligands bridge Cu(II) ions to form a double zigzag chain 3, while a single zigzag chain 4 is created with sulfate anions. The reaction of $Cu(NO_{3})_{2}$ containing $NH_{4}PF_{6}$ with btp ligands also produced a polymeric compound 5 containing $Cu(H_{2}O)_{2}^{2+}$ and $Cu(NO_{3})_{2}$ units alternatively bridged by btp ligands with H-bonds between copper bonded water and nitrate oxygen atoms. Five Zn(II) compounds were obtained from different zinc salts with btp ligands, and the structures of polymeric compounds (6, 7 and 8) and monomeric compounds (9 and 10) were determined by X-ray crystallography. With nitrate, chloride and bromide anions, btp ligands bridge Zn(II) ions to form polymeric compounds (6, 7 and 8), but btp ligands coordinate to a Zn(II) ion to form monomeric complexes (9 and 10) with $PF_{6}^{-}$ and perchlorate anions. Four silver salts and btp ligands produced two kinds of structures, dinuclear 20-membered rings and one-dimensional zigzag chain depending on different anions. For $ClO_{4}^{-}$ and OTf anions, weak interactions between Ag(I) and anions make dinuclear 20-membered rings construct polymeric compounds (11 and 13). For $PF_{6}^{-}$ anion, there are also weak interactions between Ag(I) and $F(PF_{6}^{-})(12)$, but they do not construct a polymeric compound. For $O_{2}CCF_{3}^{-}$ anion, btp ligands bridge Ag(I) atoms to make one-dimensional zigzag chain (14), and there are also interactions between Ag(I) and anions.

• 한국환경과학회지
• /
• 제1권1호
• /
• pp.1.1-11
• /
• 1992

To find heavy metal-specific effects on the photosynthetic apparatus of higher plants, we investigated effects of $CuCl_2$, HgCl_2$ and $ZnCl_2$ on electron transport activity and chlorophyll fluorescence induction kinetics of chloroplasts isolated from barley seedlings. Effects on some related processes such as germination, growth and photosynthetic pigments of the test plants were also studied. Germination and growth rate were inhibited in a concentration-dependent manner by these metals. Mercury was shown to be the most potent inhibitor of germination, growth and biosynthesis of photosynthetic pigments of barley plants. In the inhibition of electron transport activity, quantum yield of PS II, and chlorophyll fluorescence induction kinetics of chloroplasts isolated from barley seedlings, mercury chloride showed more pronounced effects than other two metals. Contrary to the effects of other two metals, mercury chloride increased variable fluorescence significantly and abolished qE in the fluorescence induction kinetics from broken chloroplasts of barley seedlings. This increase in variable fluorescence is due to the inhibition of the electron transport chain after PS ll and the following dark reactions. The inhibition of qE could be attributed to the interruption of pH formation and do-epoxidation of violaxathin to zeaxanthin in thylakoids by mercury. This unique effect of mercury on chlorophyll fluorescence induction pattern could be used as a good indicator for testing the presence and/or the concentration of mercury in the samples contaminated with heavy metals.

• 한국환경과학회지
• /
• 제24권1호
• /
• pp.47-53
• /
• 2015

Removal characteristics of Cu(II) ions by solid-phase extractant immobilized D2EHPA and TBP in PVC were investigated. Cu(II) ion concentrations in the solution and removal capacity of Cu(II) ion according to operation time were compared. The lower the initial concentration of Cu(II) ion in aqueous solution was, the removal capacity of Cu(II) ion by solid-phase extractant was increased relatively. The bigger the initial concentration of Cu(II) ion was, the removal capacity of Cu(II) ion was increased relatively. The pseudo-second-order kinetics according to operation time was showed more satisfying results than the pseudo-first-order kinetics for the removal velocity of Cu(II) ion. The removal capacity of Cu(II) ion was 0.025 mg/g in aqueous solution of pH 2, but the removal capacity of Cu(II) ion was increased to 0.33 mg/g mg/g in aqueous solution of pH 4 according to increasing pH.

• 한국환경과학회지
• /
• 제21권8호
• /
• pp.891-899
• /
• 2012

The chlorination pattern of naphthalene vapor when passed through a 1 cm particle bed of 0.5% (mass) copper (II) chloride ($CuCl_2$) mixed with silicon dioxide ($SiO_2$) was studied. Gas streams consisting of 92% (molar) $N_2$, 8% $O_2$ and 0.1% naphthalene vapor were introduced to an isothermal flow reactor containing the $CuCl_2/SiO_2$ particle bed. Chlorination of naphthalene was studied from 100 to $400^{\circ}C$ at a gas velocity of 2.7 cm/s. Mono through hexachlorinated naphthalene congeners were observed at $250^{\circ}C$ whereas a broader distribution of polychlorinated naphthalenes (PCNs) including hepta and octachlorinated naphthalenes was observed at $300^{\circ}C$. PCN production was peak at $250^{\circ}C$ with 3.07% (molar) yield, and monochloronaphthalene (MCN) congeners were the major products at two different temperatures. In order to assess the effect of a residence time on naphthalene chlorination, an experiment was also conducted at $300^{\circ}C$ with a gas velocity of 0.32 cm/s. The degree of naphthalene chlorination increased as a gas velocity decreased.

• 자원환경지질
• /
• 제25권3호
• /
• pp.233-243
• /
• 1992

옥산지역에 위치하는 황학동광상은 초기백악기 퇴적암류내에 발달한 열극을 충진한 열수맥상 광상으로, 구조운동에 수반되어 3회에 걸쳐 생성된 석영 및 방해석맥으로 구성된다. 주된 금속광물로는 황철석, 자류철석, 황동석, 섬아연석, 방연석, 적철석 및 Ag-, Pb-, Bi-sulfosalts로, 이들의 침전은 주로 광화 제 1 기의 0.5~7.6 wt.% NaCl 상당염농도를 갖는 광화유체로부터 $370^{\circ}C$ 에서 약 $200^{\circ}C$ 에 걸쳐 진행되었으며, 광화 작용시의 압력은 <180 bar, 섬도는 700~2,400 m 였다. 광상내에서 보여주는 광물공생관계에 의한 열역학적 고찰과 유체포유물 및 안정동위원소 연구결과 등으로 미루어 본 광상광화유체내 Cu는 주로 chloride complex 상으로 이동되었으며, 주로 광화유체의 냉각작용과 이에 의한 지화학적 환경요인들($fs_2$, $fo_2$, pH)의 변화에 기인하여 침전되었음을 알수 있다. 유황안정동위원소 연구결과, 주광화시기인 광화1기중 광화유체의 ${\delta}^{34}S_{H_2S}$ 값이 초기 8.2‰ 에서 후기 4.7‰ 로 점차 감소함은 광화유체의 비등에 수반되어 수소이온농도와 함께 산소분압이 점진적으로 증가한 결과로 해석되며, 광화유체의 수소 및 산소동위원소 값으로부터 열수계에서 천수가 지배적인 역할을 하였음을 알수 있다.

• 대한가정학회지
• /
• 제41권2호
• /
• pp.107-121
• /
• 2003

This study was discussed the dyeing of wool and nylon fabrics with Chinese Scholar Tree extract. The extracts of Chinese Scholar Tree was prepared in the condition of heating at $95{\pm}5C$, for 1 hour and cooling to 40C. And then the extracts of color matter treate with vacuum concentration at $60{\pm}2^{\circ}C$, 30mmHg and dried with spray dryer. The dyeing of wool and nylon fabric in this experiment was also employed the mordant dyeing method such as pre-mordant, post-mordant and simultaneous mordant method. The mordanting agents used in this study were as followings ; aluminium potassium sulfate, copper(II) acetate monohydrate, chromium potassium sulfate$.$$7H_2O$, Tin(II) chloride dihydrate, iron(II)sulfate $7H_2O$. For an evaluation of the dyeing property of the mordanting agents, the pre-mordant method, the repeat dyeing and the fastness of the light, dry cleaning, washing and rubbing measured respectively. From the results of the dye absorption, the optimum dyeing condition of the wool and nylon fabrics with Chinese Scholar Tree extract is at 80C dyeing temperature for 60 minutes. The optimum concentration of mordanting agent is Al, Cr, Sn 1%, Fe, Cu 2% solution. In general, the fastness property of the dyed wool and nylon fabrics had a comparatively high grade.

• Current Photovoltaic Research
• /
• 제1권2호
• /
• pp.109-114
• /
• 2013

$Cu_2ZnSnS_4$ (CZTS) nanoparticles were synthesized by a solvothermal method using copper (II) acetate, zinc acetate, tin chloride, and sulfur in diethylenetriamine solvent. Binary sulfide particles such as CuS, ZnS, SnS, and $SnS_2$ were obtained at $180^{\circ}C$; single-phase CZTS nanoparticles were obtained at $280^{\circ}C$. CZTS nanoparticles with spherical shape and grain size of 40 to 60 nm were obtained at $280^{\circ}C$. In the middle of 180 and $280^{\circ}C$, CZTS and ZnS phases were found. The time variation of reaction at $280^{\circ}C$ revealed that an amorphous state formed first instead of binary phases and then the amorphous phase was converted to crystalline CZTS state; it is different reaction path way from conventional solid-state reaction path of which binary phases react to form CZTS. CZTS films deposited and annealed from single-phase nanoparticles showed porous microstructure and poor adhesion. This indicates that a combination of CZTS and other flux phase is necessary to have a dense film for device fabrication.