• Current Photovoltaic Research
• /
• v.1 no.2
• /
• pp.109-114
• /
• 2013

$Cu_2ZnSnS_4$ (CZTS) nanoparticles were synthesized by a solvothermal method using copper (II) acetate, zinc acetate, tin chloride, and sulfur in diethylenetriamine solvent. Binary sulfide particles such as CuS, ZnS, SnS, and $SnS_2$ were obtained at $180^{\circ}C$; single-phase CZTS nanoparticles were obtained at $280^{\circ}C$. CZTS nanoparticles with spherical shape and grain size of 40 to 60 nm were obtained at $280^{\circ}C$. In the middle of 180 and $280^{\circ}C$, CZTS and ZnS phases were found. The time variation of reaction at $280^{\circ}C$ revealed that an amorphous state formed first instead of binary phases and then the amorphous phase was converted to crystalline CZTS state; it is different reaction path way from conventional solid-state reaction path of which binary phases react to form CZTS. CZTS films deposited and annealed from single-phase nanoparticles showed porous microstructure and poor adhesion. This indicates that a combination of CZTS and other flux phase is necessary to have a dense film for device fabrication.

• Applied Chemistry for Engineering
• /
• v.4 no.4
• /
• pp.672-682
• /
• 1993

2, 4-Heptadione(abbreviated to 24HTD) was synthesized from methylpropyl ketone and ethyl acetate with sodium amide, and the equilibrium and the kinetic characteristics of copper extraction by 24HTD-chloroform were investigated. Equilibrium constants such as the dissociation constant and the distribution coefficient of 24HTD and the stability constant of the 24HTD-Cu chelate were evaluated from the spectrophotometry, and the overall equilibrium constant of the extraction was also determined. The extracted species of the 24HTD-Cu chelate was found to be $CuR_2$ and the initial rate of the extraction of coupper by 24HTD in chloroform was expressed by $R_0=k[\bar{HR}]([Cu^{2+}]/[H^+])^{0.5}$.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.8
• /
• pp.688-693
• /
• 1996

Tetradentate Schiff base ligands derived from 2-hydroxy-1-naphthaldehyde and aliphatic diamine have been synthesized. Cu(Ⅱ) complexes of Schiff base ligands have been synthesized from the free ligands and copper acetate. The mole ratio of ligand to copper was identified to be 1:1 by the result of elemental analysis and Cu(Ⅱ) complexes were in a four-coordinated configuration. The electrochemical redox process of Cu(Ⅱ) complexes in a DMF solution has been investigated by cyclic voltammetry, chronoamperometry, differential pulse voltammetry, and controlled potential coulometry. The redox process of Cu(Ⅱ) complexes is one electron transfer process in quasi-reversible and diffusion-controlled reaction. The electrochemical redox potentials and the kinetic parameters of Cu(Ⅱ) complexes are affected by the chelate ring of Schiff base ligands.

• Journal of IKEEE
• /
• v.22 no.1
• /
• pp.1-5
• /
• 2018

In this research, sol-gel processed CuO p-type thin film transistors were fabricated with copper (II) acetate monohydrate precursors. After $500^{\circ}C$ annealing process, the deposited thin films were fully converted into CuO. We investigated $UV/O_3$ process time effect on electrical characteristics of sol-gel processed CuO thin film transistors. After 600 sec $UV/O_3$ process, the fabricated CuO thin film transistor delivered field effect mobility in saturation regime of $5{\times}10^{-3}\;cm^2/V{\cdot}s$ and on/off current ratio of ${\sim}10^2$.

• Textile Coloration and Finishing
• /
• v.7 no.4
• /
• pp.87-96
• /
• 1995

Colorant concentrates are prepared by use of concentration method of colorants extracted from Sappan wood using met hanol. Dyeabilities and fastness properties of silk fabrics dyed with concentrate of Sappan wood are investigated.The results obtained are as follows; 1. The storage stability of colorant concentrate is poor as concentration is excess. 2. Because the colors of dyeings are different with mordants, aluminium acetate, copper acetate, chromium alum and tin chloride are used in order to obtain reddish color. 3. The optimum dyeing temperature and dyeing time are 6$0^{\circ}C$ and 60 min, respectively. 4. Dry cleaning fastness is very good, and light fastness and washing fastness are low. 5. The dyeing method is simple owing to usehess of colorant concentrate prepared without extraction of colorant every time.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.8
• /
• pp.1322-1328
• /
• 2007

The catalytic activity of poly[(2,2'-bipyridine)copper(II)-μ4-oxalato] coated on a glassy carbon electrode (GCE) for O2 electroreduction is examined using cyclic voltammetry and rotating disk electrode techniques. The cyclic voltammograms show that O2 is electroreduced on pBpCuOx-coated GCE surfaces at a peak potential of ? 0.25 V in pH 4.7 acetate buffer media. The electroreduction of O2 on pBpCuOx-coated GCE occurs at 450 mV more positive potential than that found at a bare GCE. The catalytic activity originates from Cu(II) coordinated by bipyridine in the complexes and the polymer type Cu-complex films exhibit an enhanced stability compared to monomeric Cu-complexes during the O2 electroreduction. The rotating disk electrode measurements reveal that the electroreduction of O2 on pBpCuOx-coated GCE is a four-electron process. Kinetic parameters for O2 reduction on pBpCuOx-coated GCE are obtained from rotating disk experiments and compared with those on bare glassy carbon electrode surfaces.

• Journal of Internet of Things and Convergence
• /
• v.9 no.3
• /
• pp.27-33
• /
• 2023

In this study, it was analyzed with the dyeing pattern of Diospyros kaki Thunb (persimmon) and was tried to numerically evaluate how the dyeing pattern in silk fabrics and cells was changed by different mordants. When the dyed silk fabrics were sufficiently dried, the silk fabrics were found to have a pale yellow color. Interestingly, iron II sulfate mordant changed the color change the most, silk fabrics were dyed with a color close to brown or dark purple. For numerical analysis, 19% and 62.5% color changes could be induced by sodium tartrate plus citric acid and copper acetate, respectively. Iron II sulfate induced the greatest difference than that of untreated mordants at 88%. About 5% and 10% of Chinese hamster ovary (CHO) cells were stained by sodium tartrate plus citric acid and copper acetate, respectively. The staining effect induced by iron II sulfate was about 2.4 times higher than the staining effect by sodium tartrate plus citric acid. In previous studies, staining results have been visually confirmed. However, this results not only visually confirmed the dyeing, but also quantified the color change. In particular, if numerical results are continuously integrated into big data, any researcher will be able to easily obtain similar results even if the method, time, volume, etc. are changed. In addition, the numerical data of this study is considered to be an important basis for building a database for IoT construction and computer analysis.

• Analytical Science and Technology
• /
• v.12 no.6
• /
• pp.498-503
• /
• 1999

Co(II), Ni(II), and Cu(II) complexes with tetradentate schiff base-$NOTDH_2$, were synthesized. The structures of these complexes were characterized by elemental analysis, IR, UV-visible, NMR spectra, and thermogravimetric analysis. The mole ratio of schiff base($NOTDH_2$) to the metal(II) at complexes was found to be 1:1. Cu(II) complexes were four-coordinated configuration, while Co(II) and Ni(II) complexes were hexacoordinated configuration containing two water molecules and all complexes were non-ionic compounds.

• Journal of the Korean Home Economics Association
• /
• v.41 no.2
• /
• pp.107-121
• /
• 2003

This study was discussed the dyeing of wool and nylon fabrics with Chinese Scholar Tree extract. The extracts of Chinese Scholar Tree was prepared in the condition of heating at $95{\pm}5C$, for 1 hour and cooling to 40C. And then the extracts of color matter treate with vacuum concentration at $60{\pm}2^{\circ}C$, 30mmHg and dried with spray dryer. The dyeing of wool and nylon fabric in this experiment was also employed the mordant dyeing method such as pre-mordant, post-mordant and simultaneous mordant method. The mordanting agents used in this study were as followings ; aluminium potassium sulfate, copper(II) acetate monohydrate, chromium potassium sulfate$.$$7H_2O$, Tin(II) chloride dihydrate, iron(II)sulfate $7H_2O$. For an evaluation of the dyeing property of the mordanting agents, the pre-mordant method, the repeat dyeing and the fastness of the light, dry cleaning, washing and rubbing measured respectively. From the results of the dye absorption, the optimum dyeing condition of the wool and nylon fabrics with Chinese Scholar Tree extract is at 80C dyeing temperature for 60 minutes. The optimum concentration of mordanting agent is Al, Cr, Sn 1%, Fe, Cu 2% solution. In general, the fastness property of the dyed wool and nylon fabrics had a comparatively high grade.

• Particle and aerosol research
• /
• v.9 no.4
• /
• pp.201-208
• /
• 2013

Copper (II) and Nickel (II) mimic complexes of enzyme carbonic anhydrase were evaluated under ambient condition for carbon dioxide capture and conversion process. The synthesized complexes were characterized by ATR-FTIR and UV-DR spectroscopy. It was found that all the complexes have biomimetic activity towards $CO_2$ using para-nitrophenyl acetate (p-NPA) hydrolysis as the model reaction. Interestingly, the proper geometry obtained by the restricted orientation of tripodal N atoms in Cu (II) complex of 2,6-bis(2-benzimidazolyl) pyridine showed the highest activity (1.14 au) compared to others. The $CO_2$ bio-mineralization to $CaCO_3$ was carried out via in-vitro crystallization approach. Results indicate that the biomimetic complexes have a role in determining $CaCO_3$ morphology. The present observations establish a qualitative insight for the design of improved small-molecule catalysts for carbon capture.