• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.6
• /
• pp.653-662
• /
• 2017

Copper(II) acetate spectrophotometry method (CASM) was used for the rapid and convenient determination of cation exchange capacity (CEC) in soils. This method is composed of a single-step exchange reaction that adsorbs copper and is measured through spectrophotometry. The CEC of 16 Korean soils were measured using 1M ammonium acetate method (AAM) and the CASM. The CEC values determined by CASM and AAM were not significantly different, and were highly correlated ($r=0.966^{**}$). Due to the convenience, cost effectiveness, and time saving analysis of CASM, this method is recommended for most soil laboratories to measure CEC in Korean soils. However, CASM may not be applicable for soils that have a much higher CEC (greater than $20cmol_c\;kg^{-1}$).

• Bulletin of the Korean Chemical Society
• /
• v.23 no.4
• /
• pp.563-566
• /
• 2002

Copper complexes have been directly incorporated into cellulose acetate (CA) and the resulting light blue colored homogeneous films of 5-20 wt.% copper acetate complex concentrations are found to be thermally stable up to 200 $^{\circ}C$. The reaction chem istry of Cu in CA has been investigated by reacting them with small gas molecules such as CO, H2, D2, O2, NO, and olefins in the temperature range of 25-160 $^{\circ}C$, and various Cu-hydride, -carbonyl, -nitrosyl, and olefin species coordinated to Cu sites in CA are characterized by IR and UV/Vis spectroscopic study. The reduction of Cu(II) complexes by reacting with H2 gas at the described conditions results in the formation of Cu2O and copper metal nanoparticles in CA, and their sizes in 30-120 nm range are found to be controlled by adjusting metal complex concentration in CA and/or the reduction reaction conditions. These small copper metal particles show various catalytic reactivity in hydrogenation of olefins and CH3CN; CO oxidation; and NO reduction reactions under relatively mild conditions.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.453-453
• /
• 2013

유기 태양전지는 저비용으로 제작이 가능하고 제작이 용이한 장점을 가지고 있으므로 많은 그룹에서 관심을 가지고 있다. 정공 수송층으로 사용되는 PEDOT:PSS는 많이 사용되지만 강한 산성 특성 때문에 ITO 전극에 식각이 되므로 문제가 있다. 그러므로 산화물 반도체 $WO_3$, $MoO_3$, 그리고 $V_2O_3$ 등이 태양전지에 많이 만들어지고 있다. 특히 copper oxide는 높은 광흡수율을 가지고 있으므로 태양전지에 사용하는 데 많은 기대되는 물질이다. Copper oxide 박막은 열증착 법, 스프레이 필로시스, 전기화학 증착, 화학증착법, 그리고 솔-젤법 등 다양한 증착 방법이 있다. 넓은 면적의 소자를 제작할 경우 솔-젤 방법은 기존의 증착법에 비해 낮은 비용으로 제작, 높은 성장율, 그리고 높은 기계적 탄력성의 장점이 있다. 솔-젤법으로 만든 copper oxide는 P3HT의 HOMO (high occupied molecular orbital)와 비슷한 위치에 접하고 있으므로 정공수송층으로 적합하다. 본 연구에서 제작된 태양전지의 구조는 ITO/P3HT:PCBM/CuxO로 구성되어 있다. ITO가 $10{\Omega}$/sq의비저항을 가지고 있었고 UV 처리를 하였다. 그 위에 P3HT:PCBM (1:0.8 weight)를 스핀 코팅하였다. 마지막으로 0.1 M $Cu_xO$용액은 Cu (II) acetate monohydrate를 소스로 2-methoxyethanol ($C_3H_8O_2$)의 용제와 안정제로 monoethanolamine ($C_2H_7NO$)을 섞어서 만들었다. 그리고 P3HT:PCBM 위에 스핀 코팅하였고 열증착 방법으로 전극인 Ag 을 증착하여 최종 소자를 만들었다. Cu(II) acetate의 소스로 제작된 박막의 투과율 측정을 통해 에너지 밴드갭을 구할 수 있었다. Copper oxide 박막은 다결정구조 이므로 다중 밴드갭으로 구성되어지는 것을 알 수 있었다. 최종적으로 만들어진 소자를 열처리를 통해 소자 특성을 조사했더니 250도에서 가장 좋은 결과를 얻을 수 있었다.

• Journal of the Korean Chemical Society
• /
• v.55 no.4
• /
• pp.603-611
• /
• 2011

Ethoxylacetyl oxime ligands [HL, (1) and $H_2L^1$, (3)] react with copper(II) acetate monohydrate yield octahedral and square planar complexes, respectively. The complexes have been postulated due to elemental analyses, IR, UVVis. spectra, magnetic susceptibility, conductivity and ESR spectra. Molar conductance of the complexes in DMF indicates a non-ionic character. The ESR spectra of [$(L)_2Cu(H_2O)_2$], (2) complex at room temperature and 77K are characteristic of an axial symmetry ($d_{x2-y2}$) with covalent bond character and have a large line width typical of dipolar interactions. However, [$(L^1)Cu$], (4) complex in the solid state showed spectra of marked broadening and loss of hyperfine splitting confirming spinexchange interactions between the copper(II) sites. The spectrum of the doped copper(II) complex at room temperature showed super-hyperfine splitting from coordinated nitrogen atoms and it has an axial type ($d_{x2-y2}$) with covalent bond character and an essentially square-planar arrangement around the copper(II) ion. The spectrum of [$(L^1)Cu$], (4) in frozen methanol at 77K was characteristic of the triplet state of a dimer species and the distance found between the two copper(II) centers was calculated and is equal to 4.8 ${\AA}$.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.9_10
• /
• pp.1134-1143
• /
• 2003

The purpose of this study is to investigate surface color change and effects of mordants on the K/S values of silk and wool fabrics dyed with Lac extract, according to the mordanting methods and conditions such as temperature, concentration and time of the mordanting bath. The results were as follow; 1 K/S values of the silk and wool fabrics according to the temperature of the mordanting bath were shown a slight decline beyond 40$^{\circ}C$. 2. Surface color of the silk changed from red to reddish purple and that of the wool showed red tone when mordanted with Aluminum postassium sulfate, Copper acetate and Copper (II) sulfate regardless of the mordanting conditions. 3. The light and dry cleaning fastness of silk and wool fabrics dyed with Lac extract according to the mordanting methods were very good.

• Plant Resources
• /
• v.5 no.2
• /
• pp.161-164
• /
• 2002

This study was performed to investigate the effect of Artemisiae argyi Herba extract on the treatment of chromaticity and colorfastness. Artemisiae argyi Herba has been used as a Korean medicine. It is effective in removing skin disorders and suppressing pain. It is also good as a fungicide and in treating pruritis. In the long history of Korea, dyeing has been applied for a means representing the grace of natural and inner esthetic consciousness of man. Vegetable dyes give us such great benefits, diversified color; but no pollution. And ramie fabric has distinctive features such as beautiful brilliance, elegance, and strong durability. So, it is regarded as a special product of Korea traditionally. These studies were carried out to treat with acetate iron, dichloride copper and alum with a mordant to ramie fabric. The ramie fabric was died with Artemisiae argyi Herba extract. The results of experiment showed as follows: First, the chromophoric degree was the highest in acetate iron but not distinction in another mordants. Seocond, the light colorfastness was the highest in non treated and dichloride copper, but alum was the lowest. Third, the discoloration was alum and dichloride copper showed first grade in washing colorfastness. Abrasion colorfastness was not significant in this test. According the previous results, Artemisiae argyi Herba has an efficiency in removing skin disorders and suppressing pain. So it is considered that Artemisiae argyi Herba can be applied effectively to theraphy of fungicide and in treating pruritis.

• Journal of Internet of Things and Convergence
• /
• v.7 no.4
• /
• pp.35-41
• /
• 2021

Natural dyeing has traditionally been used in many countries around the world, and as natural dyes are diversified, the diversity of dyeing patterns is also expanding. This study tried to establish standardization by providing numerical values that could provide quantified information to the Internet of Things by more accurately analyzing the color changes of dyes and mordants for the four natural dyes. The addition of copper acetate, iron II sulfate and potassium dichromate to the dye extracted from Juglans regia Linn changed the original color of brown to other colors of purple, khaki and dark brown, respectively. Except for potassium dichromate added to Sophora japonica L. or Phellodendron amurense Ruprecht, the concentration of other mordants was reduced, but the color difference of the dyed silk was very large. However, although there is a difference in degree, copper acetate and iron sulfate induced color changes of 35% and 15%, respectively. In summary, it was confirmed that the highest color change was induced when 15 grams of copper acetate was added to J. regia Linn, S. japonica L. and P. amurense Ruprecht and 150 grams of iron to Phytolacca americana. The results of this study suggested that the accurate color change by various mordants can be utilized as important information that enables more accurate color induction by dyes and mordants.

• Advances in environmental research
• /
• v.7 no.3
• /
• pp.225-237
• /
• 2018

The sorption of metal ions with low-cost adsorbents plays an important role in sustainable development. In the present study, the efficacy of sugarcane bagasse, rain tree fruits (samaneasaman), banana stem and their mixtures, used as bio-sorbents, in the removal of Cu(II) and Pb(II) ions from aqueous solution is evaluated. Batch studies are conducted, and residual ions were measured using Inductively Coupled Plasma (ICP)-atomic spectrometer. Effect of pH, initial metal ion concentration, reaction time and adsorbent dosage are studied. The Pb(II) removal efficiency was observed to be 97.88%, 98.60% and 91.74% for rain tree fruits, banana stem and a mixture of adsorbents respectively. The highest Cu(II) ion removal was observed for sugarcane bagasse sorbent with an efficiency of 82.10% with a pH of 4.5 and a reaction time of 90 min. Finally, desorption studies were carried out to study the leaching potential of adsorbent, and it was found that the adsorbent is stable in water than the other leaching agents such as HCl, ammonium acetate, Sodium EDTA. Hence, these adsorbents can be effectively used for the removal of these heavy metals.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.10
• /
• pp.1572-1576
• /
• 2006

A dimeric precursor, $[Cu(dmae)(OCOCH_3)(H_2O)]_2$ for the CVD of copper metal films, (dmaeH = N,N-dimethylaminoethanol) was synthesized by the reaction of copper(II) acetate monohydrate ($Cu(OCOCH_3)_2{\cdot}H_2O$) and dmaeH in toluene. The product was characterized by m.p. determination, elemental analysis and X-ray crystallography. Molecular structure of $[Cu(dmae)(OCOCH_3)(H_2O)]_2$ shows that a dimeric unit $[Cu(dmae)(OCOCH_3)(H_2O)]_2$ is linked to another through hydrogen bond and it undergoes facile decomposition at 300 C to deposit granular copper metal film under nitrogen atmosphere. The decomposition temperature, thermal behaviour, kinetic parameters, evolved gas pattern of the complex, morphology, and the composition of the film were also investigated.

• Journal of the Korean Chemical Society
• /
• v.43 no.5
• /
• pp.511-516
• /
• 1999

Shiff Base ligand such as [NOIPH] have been synthesized from 2-hydroxy-1-naphthaldehyde and arometic amine. Co(II), Ni(II), and Cu(II) complexes from the reaction metal salts with Tridentate Schiff Base [NOIPH] were sythesized. The ligand and metal(II) complexes were characterized by the elementary analysis, IR, UV-Vis, NMR spectra, and thermogravimetric analysis. Metal(II) complexes in solid state have been shown that the mole raio of Schiff base [NOIPH] as $N_2O$ type to Metal(II) is 2:1 and the metal(II) complexes of $N_2O$ ligand type were four-coordinated configuration.