• Korean Chemical Engineering Research
• /
• 제44권4호
• /
• pp.363-368
• /
• 2006

$C_9$-알데히드를 수소화하여 $C_9$-알콜을 제조하는 공정에 사용하기 위한 최적의 촉매를 선정하고, $C_9$-알콜의 수율을 극대화하기 위한 운전 조건을 확립하기 위한 실험을 수행하였다. 구리 전구체로 acetate를 사용하고 침전제로 $Na_2CO_3$를 사용하여 제조한 $CuO/ZnO/Al_2O_3$(60:30:10 wt％) 촉매의 표면적 및 구리 비표면적이 가장 우수하였으며 $C_9$-알데히드 수소화 반응에서도 가장 우수한 성능을 보였다. 최적화된 촉매를 장착한 trickle bed 반응기를 사용하여 $175^{\circ}C$, 800 psi, $WHSV=3hr^{-1}$의 조건에서 94.1 wt％의 $C_9$-알콜 수율을 얻었다. 알데히드의 수소화 반응에 사용되는 다른 촉매들과 비교한 결과 Ni/kieselghur 촉매와 유사한 성능을 보였으며 $Cu-Ni-Cr-Na/Al_2O_3$ 촉매 및 $Ni-Mo/Al_2O_3$ 촉매의 경우보다 우수한 성능을 보이는 것을 확인하였다. 장기 촉매 테스트를 통해서 촉매의 안정성을 확인한 결과 약 72시간 이후에는 고비점 부산물의 생성량 증가로 인하여 $C_9$-알콜의 수율이 약간씩 감소하였다.

• 전기전자학회논문지
• /
• 제22권1호
• /
• pp.1-5
• /
• 2018

Sol-gel 공법을 이용하여, p-형 CuO 박막 트랜지스터를 제작하였다. 제작된 CuO 박막 트랜지스터는 copper (II) acetate monohydrate 를 전구체로 사용하였다. $500^{\circ}C$ 열처리 후에 형성된 전구체는 p-형 CuO 박막이 됨을 확인하였다. 또한 전구체를 형성하기 전 기판표면의 $UV/O_3$ 조사량에 따른 CuO 박막 트랜지스터의 전기적 특성변화에 대하여 연구하였으며, 600 초동안 $UV/O_3$를 조사한 경우 제작된 CuO 박막 트랜지스터는 $5{\times}10^{-3}\;cm^2/V{\cdot}s$ 의 이동도와 약 $10^2$의 온/오프 전류비를 보여주었다.

• 한국재료학회지
• /
• 제26권2호
• /
• pp.84-89
• /
• 2016

We present the rectifying and nitrogen monoxide (NO) gas sensing properties of an oxide semiconductor heterostructure composed of n-type zinc oxide (ZnO) and p-type copper oxide thin layers. A CuO thin layer was first formed on an indium-tin-oxide-coated glass substrate by sol-gel spin coating method using copper acetate monohydrate and diethanolamine as precursors; then, to form a p-n oxide heterostructure, a ZnO thin layer was spin-coated on the CuO layer using copper zinc dihydrate and diethanolamine. The crystalline structures and microstructures of the heterojunction materials were examined using X-ray diffraction and scanning electron microscopy. The observed current-voltage characteristics of the p-n oxide heterostructure showed a non-linear diode-like rectifying behavior at various temperatures ranging from room temperature to $200^{\circ}C$. When the spin-coated ZnO/CuO heterojunction was exposed to the acceptor gas NO in dry air, a significant increase in the forward diode current of the p-n junction was observed. It was found that the NO gas response of the ZnO/CuO heterostructure exhibited a maximum value at an operating temperature as low as $100^{\circ}C$ and increased gradually with increasing of the NO gas concentration up to 30 ppm. The experimental results indicate that the spin-coated ZnO/CuO heterojunction structure has significant potential applications for gas sensors and other oxide electronics.

• 대한화학회지
• /
• 제55권4호
• /
• pp.603-611
• /
• 2011

Ethoxylacetyl oxime 리간드 [HL, (1) 및 $H_2L^1$, (3)]와 아세트산 구리(II) 일수화물을 반응시켜 팔면체 및 사각평면착물을 각각 얻었다. 이들 착물을 원소분석, IR 및 UV-Vis 스펙트럼, 자기수자율, 전기전도도 및 ESR 스펙트럼으로 조사하였다. DMF에서 이들 착물의 몰전기전도도 측정한 결과 비이온성을 보였다. 실온 및 77 K에서 [$(L)_2Cu(H_2O)_2$], (2) 착물의 ESR 스펙트럼은 배위결합성을 갖는 축대칭($d_{x2-y2}$)의 특성을 보이며, 또한 전형적인 쌍극자 상호작용에 의해 큰 띠나비를 갖는다. 그러나 착물 [$(L^1)Cu$], (4)는 고체상태에서 큰 띠넓임으로 인해 초미세 갈라짐이 관찰되지 않았는데, 이는 구리(II) 결합자리들 사이의 스핀-교환 상호작용에 의한 것으로 확인되었다. 실온에서 도포된 구리(II) 착물의 스펙트럼은 배위된 질소원자로 인해 극초미세 갈라짐을 보였다. 또한 이 물질은 공유 결합성을 갖는 축형태($d_{x2-y2}$)의 특성을 보이고, 구리(II) 이온의 환경은 기본적으로 사각-평면 배열을 갖는다. 77 K의 얼어있는 메탄올에서 [$(L_1)Cu$], (4)의 스펙트럼은 이합체 화합물의 삼중항 상태의 특성을 보이며, 두 구리(II) 이온 중심 사이의 거리를 계산한 결과 4.8 이다.

• Journal of Applied Biological Chemistry
• /
• 제51권3호
• /
• pp.95-101
• /
• 2008

The gene encoding a putative esterase of Xanthomonas oryzae pv. oryzae was cloned using PCR technique. The gene was expressed with His6 tag in E. coli. One-step purification of the recombinant esterase with Ni-NTA resin resulted in one band by SDS-PAGE analysis. The purified enzyme showed a molecular weight of 30 kDa, as expected, therefore the enzyme was a mononer. The enzyme was the most active toward p-nitrophenyl (p-NP) acetate and p-NP-butyrate to a lesser extent. However, the enzyme could not hydrolyze p-NP-myristate, palmitate, and stearate. Therefore, the enzyme is considered as an esterase, very different from lipase. The purified esterase had optimal pH at around 8.0 and was stable in a broad range of pH values. The optimal temperature ranged from 30 to $40^{\circ}C$, and the residual activity observed after heat treatment at $55^{\circ}C$ for 20 min was 72 % of the initial activity. The activity was inhibited by the presence of copper and cobalt ions.

• 한국염색가공학회지
• /
• 제7권4호
• /
• pp.87-96
• /
• 1995

Colorant concentrates are prepared by use of concentration method of colorants extracted from Sappan wood using met hanol. Dyeabilities and fastness properties of silk fabrics dyed with concentrate of Sappan wood are investigated.The results obtained are as follows; 1. The storage stability of colorant concentrate is poor as concentration is excess. 2. Because the colors of dyeings are different with mordants, aluminium acetate, copper acetate, chromium alum and tin chloride are used in order to obtain reddish color. 3. The optimum dyeing temperature and dyeing time are 6$0^{\circ}C$ and 60 min, respectively. 4. Dry cleaning fastness is very good, and light fastness and washing fastness are low. 5. The dyeing method is simple owing to usehess of colorant concentrate prepared without extraction of colorant every time.

• 한국식품과학회지
• /
• 제36권2호
• /
• pp.311-316
• /
• 2004

비타민-C를 다량 함유하고 있는 생열귀나무의 자원화를 위한 연구로서 페놀성 화합물의 함량 및 사람의 저밀도지방단백질의 산화에 대한 항산화 활성을 측정하였다. 생열귀나무 추출물의 페놀성 화합물 함량을 측정한 결과, 모든 부위에서 100g당 8.3-10.6g으로 매우 높은 양을 함유하고 있었다. 또한, 생열귀나무 추출물 및 분획물에 대한 항산화 물질의 함량을 측정 한 결과, 생열귀나무 뿌리 메탄올 추출물과 뿌리의 에틸아세테이트 및 부탄을 분획물이 285nm에서 흡수를 나타내는 페놀성 화합물을 다량 함유하고 있음을 확인하였다. TBARS에 의한 LDL산화 억제효과 측정시, 생열귀나무 뿌리의 메탄올 추출물이 가장 좋은 효과를 나타내었다. 생열귀나무 뿌리의 에틸아세테이트 및 부탄을 분회물의 경우, $30\;{\mu}g/mL$ 첨가시 85.3% 및 93.2%까지 LDL 산화를 억제함을 확인하였다. 또한 $CHCl_3$ 분획물, EtOAc 분획물, 그리고 BuOH 분획물은 $30\;{\mu}g/mL$ 분획물 첨가시 $Cu^{2+}$에 의한 LDL 산화를 8시간까지 억제함을 확인하였다. $Cu^{2+}$에 의한 apoB carbonylation과 conjugate diene형성 억제효과 측정시, EtOAc 분획물과 BuOH 분회물이 가장 탁월하게 억제함을 보여주었다. 생열귀나무는 다량의 페놀성 화합물을 함유하고 있으며 항산화 활성이 매우 탁월하므로 새로운 기능성식품 소재로의 활용이 기대되는 약용식물자원이다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.374.1-374.1
• /
• 2016

Copper and zinc are well known elements with antibacterial effect. So in this research, Cu and Zn (CZ) nanofibers (NFs) were fabricated by electrospinning method using polyvinylpyrrolidone (PVP) for adjusting viscosity. The CZ/PVP precursor solutions were prepared with copper sulfate pentahydrate, and zinc acetate dihydrate. Distilled water was used for solvent and PVP was used to regulate the viscosity of precursor solution. The CZ/PVP NF composites were obtained by electrospinning method using the precursor solution. The average diameter of obtained CZ/PVP NFs was determined by optical microscopy using Motic image plus 2.0 program and was found to be 490 nm. The chemical environment of the obtained CZ/PVP NF composites was investigated with X-ray photoelectron spectroscopy (XPS). After heating the obtained CZ/PVP NF composites at 353 K, the solvent was removed. The characteristic C 1s, Cu 2p, and Zn 2p core level XPS peaks were observed. After calcination the CZ/PVP NF composites at 873 K in Ar environment for 5 hrs, PVP was decomposed at this temperature and CZ NF was obtained. This was confirmed by decreasing the intensity of C 1s.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.236.2-236.2
• /
• 2015

The copper-zinc(Cu-Zn) nanofiber was prepared by electrospinning method. The Cu/PVP (polyvinylpyrrolidone) and Zn/PVP precursor solutions were prepared by dissolution of copper sulfate and zinc acetate in methanol, respectively. The PVP was used to control the viscosity of the precursor solutions. The optimized ratio for the Cu/PVP and Zn/PVP nanofibers was determined separately. Then the suitable ratio of the precursor solutions was applied for fabrication of Cu/Zn/PVP nanofiber. For the electrospinning method, the precursor solutions were filled in a syringe. The distance between metallic needle on the syringe and collector was fixed at 16 cm and the voltage was applied on the tip was 13.0 kV. And the as-spun nanofiber was heated at 353K for removal of residual solvent. Then the heated nanofibers were calcined at 973K to decompose PVP. The obtained Cu, Zn, and Cu-Zn nanofibers were investigated with X-ray photoelectron spectroscopy (XPS) for the chemical properties, scanning electron microscopy (SEM) for the morphologies, and X-ray diffraction (XRD) to characterize the crystallinity and phase of nanofibers.

• Bulletin of the Korean Chemical Society
• /
• 제28권8호
• /
• pp.1322-1328
• /
• 2007

The catalytic activity of poly[(2,2'-bipyridine)copper(II)-μ4-oxalato] coated on a glassy carbon electrode (GCE) for O2 electroreduction is examined using cyclic voltammetry and rotating disk electrode techniques. The cyclic voltammograms show that O2 is electroreduced on pBpCuOx-coated GCE surfaces at a peak potential of ? 0.25 V in pH 4.7 acetate buffer media. The electroreduction of O2 on pBpCuOx-coated GCE occurs at 450 mV more positive potential than that found at a bare GCE. The catalytic activity originates from Cu(II) coordinated by bipyridine in the complexes and the polymer type Cu-complex films exhibit an enhanced stability compared to monomeric Cu-complexes during the O2 electroreduction. The rotating disk electrode measurements reveal that the electroreduction of O2 on pBpCuOx-coated GCE is a four-electron process. Kinetic parameters for O2 reduction on pBpCuOx-coated GCE are obtained from rotating disk experiments and compared with those on bare glassy carbon electrode surfaces.