• Journal of Electrical Engineering and Technology
• /
• v.8 no.5
• /
• pp.1002-1011
• /
• 2013

This paper proposes the new adaptive protection algorithm for inverse-time overcurrent relays (OCRs) to ensure their proper operating time and protective coordination. The application of the proposed algorithm requires digital protection relays with microcontroller and memory. The operating parameters of digital OCRs are adjusted based on the available data whenever system conditions (system with distributed generation (DG)) vary. Moreover, it can reduce the calculation time required to determine the operating parameters for achieving its purpose. To verify its effectiveness, several case studies are performed in time-domain simulation. The results show that the proposed adaptive protection algorithm can keep the proper operating time and provide the protective coordination time interval with fast response.

• KIEE International Transactions on Power Engineering
• /
• v.2A no.3
• /
• pp.83-88
• /
• 2002

An over current relay(OCR), one of the most frequently used protective devices, has time-current characteristics (TCC) to control its trip time according to the current level. It is because an appropriate operating time interval is necessary for coordination with other protective devices. A set of TCC curves of an OCR is, in general, given by the supplier from which a curve is selected by the operator. Therefore, in many cases, it is impossible to consider the operation condition of the given power system exactly. A novel concept of an OCR is suggested in this paper. The proposed OCR has an internal correction module so that it may produce the most adequate TCC curve according to the given protective information for coordination with other devices. With the generated TCC curve, a variety of operation and coordination conditions can be taken into consideration in an effective manner. The suggested OCR is applied to a simple test power system to show very promising results from a coordination point of view.

• Journal of the Ergonomics Society of Korea
• /
• v.26 no.2
• /
• pp.149-155
• /
• 2007

Recently, various devices requiring text input such as mobile phone IPTV, PDA and UMPC are emerging. The frequency of text entry for them is also increasing. This study was focused on the evaluation of Korean text entry interface. Various models to evaluate text entry interfaces have been proposed. Most of models were based on human cognitive process for text input. The cognitive process was divided into two components; visual scanning process and finger movement process. The time spent for visual scanning process was modeled as Hick-Hyman law, while the time for finger movement was determined as Fitts' law. There are three questions on the model-based evaluation of text entry interface. Firstly, are human cognitive processes (visual scanning and finger movement) during the entry of text sequentially occurring as the models. Secondly, is it possible to predict real text input time by previous models. Thirdly, does the human cognitive process for text input vary according to users' text entry speed. There was time gap between the real measured text input time and predicted time. The time gap was larger in the case of participants with high speed to enter text. The reason was found out investigating Eye-Hand Coordination during text input process. Differently from an assumption that visual scan on the keyboard is followed by a finger movement, the experienced group performed both visual scanning and finger movement simultaneously. Arrival Lead Time was investigated to measure the extent of time overlapping between two processes. 'Arrival Lead Time' is the interval between the eye fixation on the target button and the button click. In addition to the arrival lead time, it was revealed that the experienced group uses the less number of fixations during text entry than the novice group. This result will contribute to the improvement of evaluation model for text entry interface.

• The KIPS Transactions:PartC
• /
• v.14C no.6
• /
• pp.475-480
• /
• 2007

Recently, wireless networking devices that depend on the limited Battery and power-saving of wireless hosts became important issue. Batteries can provide a finite amount of energy, therefore, to increase battery lifetime, it is important to design techniques to reduce energy consumption by wireless hosts. This paper improved power saying mechanism in Distributed Coordination Function(DCF) of IEEE 802.11. In the IEEE 802.11 power saving mechanism specified for DCF, time is divided into so-called beacon intervals. At the start of each beacon interval, each node in the power saving mode periodically wakes up during duration called the ATIM Window. The nodes are required to be synchronized to ensure that all nodes wake up at the same time. During the ATIM window, the nodes exchange control packets to determine whether they need to stay awake for the rest of the beacon interval. The size of the ATIM window has considerably affected power-saving. This paper can provide more power-saving than IEEE 802.11 power saving mode because ATIM window size is efficiently increased or decreased.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.17-26
• /
• 2018

If a photovoltaic (PV) system is installed in a primary feeder interconnected with the PV system, bi-directional power flow can occur, and then, the magnitude and direction of the fault current can change, depending on the fault location and point of common coupling (PCC) of the PV system, and the time current curve (TCC) cannot be properly coordinated between protection devices. Also, it is difficult to obtain a proper time interval for protection devices because the conventional setting approach is applied, even though the PV system is installed and operating. Therefore, this paper presents three operation modes considering the operational conditions of the PV system to obtain setting values for protection devices. Based on the mode, this paper proposes an algorithm to calculate the optimal protection coordination time interval according to the introduction capacity of the PV system. In addition, this paper performs modelling of a distribution system with the PV system and protection devices by using Off-DAS S/W, and analyzes the characteristics of the time interval between the protection devices, such as substation relays, reclosers, customer relays, and PV customer relays. The simulation results confirmed that the proposed operational modes and setting-value algorithms are useful and effective for protection coordination in a distribution system for a PV system.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.5
• /
• pp.837-844
• /
• 2019

In this paper, we propose the AMBM(: Adaptive Multi-channel Backoff Machisum) -Mac protocol to provide high throughput for non-safety applications in VANET(: Vehicular Ad Hoc Networks) environment. The proposed protocol guarantees the quality of service of non-safety packets by dynamically adjusting CW(: Channel Window) of WSA(: WAVE Service Advertisement) to maximize throughput between non-safety packets of different priority. It also shows that allocating a large amount of time for channel coordination and time slot reservation for SC and dynamically adjusting CW and CCI as nodes increase to reduces transmission delay than IEEE 1609.9, C-MAC(: Coordinated multi-channel MAC, and Q-VCI(: QoS Variable CCH Interval) protocols.

• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.2
• /
• pp.75-86
• /
• 2002

The selection of the optimal checkpointing interval has been a very critical issue to implement a checkpointing recovery scheme for the fault tolerant distributed system. This paper presents a new scheme that allows a process to select the proper checkpointing interval dynamically. A process in the system evaluates the cost of checkpointing and possible rollback for each checkpointing interval and selects the proper time interval for the next checkpointing Unlike the other scheme, the overhead incurred by both of the checkpointing and rollback activities are considered for the cost evaluation and current communication pattern is reflected in the selection of the checkpointing interval. Moreover, the proposed scheme requires no extra message communication for the checkpointing interval selection and can easily be incorporated into the existing checkpointing coordination schemes.

• Biomolecules & Therapeutics
• /
• v.4 no.4
• /
• pp.349-353
• /
• 1996

The present study examined pharmacokinetic profiles of KBP31705-Cl27 and KBP30603-901, new platinum coordination complexes synthesized as anticancer candidates, in comparison with two well-known platinum-containing anticancer agents, cisplatin and carboplatin in rats. Under sodium pentobarbital anesthesia of male Sprague-Dawley rats, urinary bladder, and femoral artery and vein were catheterized for urine collection, blood sampling and drug injection, respectively Following i.v. administration of cisplatin (2 mg/kg), KBP31705-C127 (2 mg/kg), carboplatin (20 mg/kg) or KBP30603-901 (20 mg/kg), blood samples were collected at 2, 4, 6, 8, 10, 15, 20, 30, 45, 60 and 120 minutes. Urine samples were collected at 1-hr interval for 4 hr. Platinum concentrations in plasma and urine were measured using an inductively coupled plasmamass spectrometer. The plasma concentration-time curves were biphasic for all drugs during the time period studied. Compared with cisplatin, KBP31705-C127 showed similar decay patters in the alpha- and betaphases with slightly lower plasma concentrations. Urinary platinum excretion for cisplatin and KBP31705-C 127 was 56 and 52% of the administered dose in 4 hr, respectively. With regard to carboplatin and KBP 30603-901, a similar decay pattern was also observed in the alpha-phase. The half life of KBP30603-901 in the beta-phase, however, was much longer than that of carboplatin, which was consistent with the urinary excretion results that 46 and 59% of the administered dose were excreted in the urine in 4hr, respectively. The results suggest that platinum coordination complexes are primarily excreted via the renal route and KBP30603-901 can elicit longer duration of action due to slower renal excretion compared to carboplatin.

• Journal of Power System Engineering
• /
• v.21 no.2
• /
• pp.57-63
• /
• 2017

The large-eddy simulation(LES) was carried out to evaluate the drag and static pressure acting on the blade surface of a small-size axial fan(SSAF) under the condition of unsteady-state, incompressible fluid and three-dimensional coordination. The axial component of drag coefficient increases with the increase of operating load, but the radial components have negligible sizes regardless of operating loads. Otherwise, the static pressures acting on the blade surfaces of SSAF show different distributions around the operating point of D equivalent to the stall. Also, with the increase of operating load, the static pressures acting on the pressure and suction surfaces of blade concentrate at the tips and leading-edges as a whole.

• Journal of information and communication convergence engineering
• /
• v.5 no.3
• /
• pp.205-208
• /
• 2007

The IEEE 802.11 is a MAC protocol which has been standardized by IEEE for Wireless Local Area Networks (WLANs). In the IEEE 802.11 WLANs, network nodes experiencing collisions on the shared channel need to backoff for a random period of time, which is uniformly selected from the Contention Window (CW). This contention window is dynamically controlled by the Binary Exponential Backoff (BEB) algorithm. However, the BEB scheme suffers from a fairness problem; some nodes can achieve significantly larger throughput than others. This paper proposes a new backoff algorithm for the IEEE 802.11 DCF scheme. This algorithm uses the hop count for considering fairness. It causes flows with high hop count to generate short backoff interval than those with low hop count, thus getting high priority. Therefore, when a collision occurs, the modified IEEE 802.11 DCF assigns higher priority to flow to be close to a destination.