• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.3
• /
• pp.50-56
• /
• 1997

본 논문은 다물체동역학에서의 민감도해석을 위하여 개발된 혼합법(Mixed method)을 보여준다. 이 방법은 해석적인 미분의 유도와 수치적인 미분의 장점을 함께 사용한다. 해석적인 유도는 기본적인 전체의 미분에서 사용 되며 여기서 나온 각 세부 미분항은 수치적인 미분방법에 의존한다. 이로인하여 세부미분항을 다물체의 운동방정식 에서 유도할 때 발생하는 어려움을 제거한다. 여기서 사용되는 운동 방정식은 Joint Coordinate 방정식을 사용하며, 이 방정식의 계산시간과 정확도에 의해 민감도해석에서도 정확도와 계산시간의 효율을 향상시킬 수 있게 된다. 예제로서 자동차 Suspension 시스템의 승차감을 최적화하기 위한 민감도 해석을 수행하였으며, 여기서 혼합법이 차등미분법과 상응한 결과를 보였다.

• The Journal of Engineering Geology
• /
• v.3 no.3
• /
• pp.279-293
• /
• 1993

In recent yeaes, the collapses of man made structures have been encountered from time to time due to the deformation of the ground in korea. Furthermore, the possibilities of casasters from the ground deformation suCh as landslide and active fault are atrracting our attention to the deformation monitoring. In this study, two-coordinate tilt which was monitored during six months in order to develop tediniques for prevention of disasters from the ground deformation. The two-coordinate tilt which was detected by a tilt-sensor installed in shallow depth on the slope with the sensitivity of 0.0001 arc.sec in every 10 minutes was recorded continously to PC through the interface with 200-m line coonection. The observed digital tilt data. together with the relevant meteorological data were analyzed in reference to engineering application. During the whole observation period of six months, the net tilt is 10.06 arc.sec to the west and 73.88 arc.sec to the south. Consequently the ground has a tilt of 74.56 arc.sec to the direction of $S7.75^{\circ}W$ with average tilting of 0.02 arc.sec/hour. In spite of such fast and large tilting, it is interpreted in view of engineering aspects that the site is much safe from danger, since both East-West and North-South components of tilt converge as time goes by. Two categories of deformational events are recognized ; one is toward the direction of surface slope and the other is to the direction of increased pore pressure. Tiks are acenain to have a close relation with precipitation of rain. The daily variation of two-coordinate tilt is delayed 4.3 hours in average after the variation of atmospheric temperature. A certain correlation between atmospheric pressure and deformation might be revealed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.4
• /
• pp.127-135
• /
• 1984

This paper considers the problem of optimum shaping of steel arches subjected to general loading. The weight of arches is considered as the objective function and the appropriate combinations of section forces, material volume, arc length, and closed section area of arches are considered as the stress constraints. The shape optimization problems are formulated in terms of the design variables of sectional areas of each element. First the cost sensitivity of the design is investigated. Then the investigation comprises the search for the optimum arch form as well as the optimum area distribution along the arch. Two spaces of shape optimization algorithm will be treated, the first space corresponding to the section optimization by the Modified Newton Raphson Method, and the second space to the coordinate optimization by the Powell Method. The optimization algorithm is evaluated and the optimum span-rise ratios for the given arches are evaluated.

• Journal of Yeungnam Medical Science
• /
• v.34 no.1
• /
• pp.19-28
• /
• 2017

The incidence of type 2 diabetes mellitus and insulin resistance is growing rapidly. Multiple organs including the liver, skeletal muscle and adipose tissue control insulin sensitivity coordinately, but the mechanism of skeletal muscle insulin resistance has not yet been fully elucidated. However, there is a growing body of evidence that lipotoxicity induced by mitochondrial dysfunction in skeletal muscle is an important mediator of insulin resistance. However, some recent findings suggest that skeletal mitochondrial dysfunction generated by genetic manipulation is not always correlated with insulin resistance in animal models. A high fat diet can provoke insulin resistance despite a coordinate increase in skeletal muscle mitochondria, which implies that mitochondrial dysfunction is not mandatory in insulin resistance. Furthermore, incomplete fatty acid oxidation by excessive nutrition supply compared to mitochondrial demand can induce insulin resistance without preceding impairment of mitochondrial function. Taken together we suggested that skeletal muscle mitochondrial overloading, not mitochondrial dysfunction, plays a pivotal role in insulin resistance.

• Transactions on Electrical and Electronic Materials
• /
• v.3 no.4
• /
• pp.21-26
• /
• 2002

Color correction methods of chromaticity coordinates using Color Matching Function (CMF) were studied to develop a device-independent portable-type urine analyzer. The reflection spectra were measured for the degrees of 10 test items of the urine reagent strip (urine strip) to develop a portable-type urine analyzer. A computer simulation was performed to quantitatively distinguish the color reactions of the urine system, by using the spectral power distribution of Light Emitting Diode(LED), the reflection of a urine strip, and spectral sensitivity of a photodiode. To develop a device-independent system, chromaticity coordinates were modified to reduce the color deviations in the urine strip, by using the temperature compensation of LED and the color transformation by CMF. The experimental values obtained by developed urine system exhibited the accuracy above 95% for all color samples.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.797-799
• /
• 1996

This paper presents a simple method for evaluating of voltage stability using the line flow equation. Line flow equations($P_{ij}$, $Q_{ij}$) are comprised of state variable, $V_i$, ${\delta}_i$, $V_j$ and ${\delta}_j$, and line parameter, r and x. Using the feature of polar coordinate, these equations become one equation with two variables, $V_i$ and $V_j$. Moreover, if bus j is slack bus or generator bus, which is specified voltage magnitude, it becomes One equation with one variable $V_i$, that is, may be formulated with the second-order equation for $V_i^2$. Therefore, solutions are obtained with simple computation. Solutions obtained are used for evaluating of voltage stability through sensitivity analysis. Also, considering of reactive power source, method for evaluating the voltage stability is introduced. The proposed method was validated to 2-bus and IEEE 6-bus system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.294-296
• /
• 2022

Atherosclerosis is a chronic vascular inflammatory disease in which plaque builds up in the arteries and impairs blood flow. This can lead to heart disease and stroke. Since most people do not have any symptoms until the artery is severely narrowed, early detection of atherosclerosis is critical. In this paper, in order to effectively detect atherosclerotic lesions in tube-shaped blood vessels, polar conversion is applied to MRI images based on the vessel center. We then propose a SE-LSTMNet model using continuous signal information for each angle of a polar coordinate image. The trained model showed classification performance of 0.9194 accuracy, 0.9370 sensitivity, 0.8796 specificity, 0.8700 F1 score, and 0.9719 AUC on the validation data.

• The Plant Pathology Journal
• /
• v.40 no.2
• /
• pp.205-217
• /
• 2024

Brown rot disease, caused by Monilinia spp., poses a significant threat to pome and stone fruit crops globally, resulting in substantial economic losses during pre- and post-harvest stages. Monilinia fructigena, M. laxa, and M. fructicola are identified as the key agents responsible for brown rot disease. In this study, we employed the amplified fragment length polymorphism (AFLP) method to assess the genetic diversity of 86 strains of Monilinia spp. isolated from major stone fruit cultivation regions in South Korea. Specifically, strains were collected from Chungcheong, Gangwon, Gyeonggi, Gyeongsang, and Jeolla provinces (-do). A comparative analysis of strain characteristics, such as isolation locations, host plants, and responses to chemical fungicides, was conducted. AFLP phylogenetic classification using 20 primer pairs revealed the presence of three distinct groups, with strains from Jeolla province consistently forming a separate group at a high frequency. Furthermore, M. fructicola was divided into three groups by the AFLP pattern. Principal coordinate analysis and PERMANOVA were applied to compare strain information, such as origin, host, and fungicide sensitivity, revealing significant partition patterns for AFLP according to geographic origin and host plants. This study represents the utilization of AFLP methodology to investigate the genetic variability among M. fructicola isolates, highlighting the importance of continuous monitoring and management of variations in the brown rot pathogen.

• Investigative Magnetic Resonance Imaging
• /
• v.18 no.2
• /
• pp.107-119
• /
• 2014

Purpose : To efficiently evaluate phased array coil performance using a software tool box with which we can make visual comparison of the sensitivity of every coil element between the real experiment and EM simulation. Materials and Methods: We have developed a $C^{{+}{+}}$- and MATLAB-based software tool called Phased Array Coil Evaluator (PACE). PACE has the following functions: Building 3D models of the coil elements, importing the FDTD simulation results, and visualizing the coil sensitivity of each coil element on the ordinary Cartesian coordinate and the relative coil position coordinate. To build a 3D model of the phased array coil, we used an electromagnetic 3D tracker in a stylus form. After making the 3D model, we imported the 3D model into the FDTD electromagnetic field simulation tool. Results: An accurate comparison between the coil sensitivity simulation and real experiment on the tool box platform has been made through fine matching of the simulation and real experiment with aids of the 3D tracker. In the simulation and experiment, we used a 36-channel helmet-style phased array coil. At the 3D MRI data acquisition using the spoiled gradient echo sequence, we used the uniform cylindrical phantom that had the same geometry as the one in the FDTD simulation. In the tool box, we can conveniently choose the coil element of interest and we can compare the coil sensitivities element-by-element of the phased array coil. Conclusion: We expect the tool box can be greatly used for developing phased array coils of new geometry or for periodic maintenance of phased array coils in a more accurate and consistent manner.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.3
• /
• pp.19-31
• /
• 2006

이 연구의 목적은 각 분절의 마커세트와 무릎관절 중심 정의가 3차원 무릎 관절각을 산출하는데 얼마나 민감하게 영향을 미치는지를 연구하였다. 자료수집은 1명을 실험대상자로 하여 두 가지 형태의 각기 다른 분절의 정의와 무릎관절의 중심을 나타내는 반사마커들을 동시에 오른쪽 하지에 부착시켜 실험을 실시하였다. 실험대상자의 달리기동작 중 좌측으로 45도 방향전환동작의 지지기를 분석하였다. 이를 위해서 8대의 고속카메라들을 이용하였고 달리기속도는 4m/$sec{\pm}(10%)$로 통제하였다. 하지분절의 발분절에는 하나의 마커세트를, 정강이와 대퇴분절에는 두 가지의 다른 마커세트들을 부착시켰다. 발분절에는 3개의 마커를 신발의 뒷부분에 부착하였고 정강이분절을 정의하기 위하여 첫 번째 마커세트는 경골을 중심으로 3개의 마커들을 두 번째 마커세트는 비골을 중심으로 3개의 마커를 부착하였다. 대퇴분절의 마커세트를 정의하기 위하여 첫 번째 마커세트에는 대퇴골을 중심으로 3개의 마커를 두 번째 마커세트에는 대퇴근육을 중심으로 3개의 마커들을 부착하였다. 무릎관절중심을 정의하는데 두 가지 다른 정의가 적용되었다. 첫 번째 무릎중심을 무릎의 내측과 외측의 마커들을 통해 두 마커의 중심을 무릎관절의 중심으로 정의하였다. 두 번째 무릎중심정의는 무릎의 외측부분과 슬개골의 중심에 부착된 마커들로부터의 교차점을 무릎관절중심으로 산출하였다. 무릎관절의 각도를 산출하기 위해서 JCS(Joint Coordinate System)의 정의가 적용되었고 연구의 결과는 다음과 같았다. 두 가지의 다른 분절마커세트 사이에서 무릎의 신전(extension)과 굴곡(flexion)은 유사한 형태를 나타냈으며 최대 무릎굴곡(peak knee flexion)각에서 $4.746^{\circ}$의 차이를 나타냈다. 다른 분절마커세트 사이의 회전(rotation)각과 내전(adduction)/외전(abduction)에서는 서로 다른 형태를 나타내었고, 두 마커세트간 최대무릎외측회전(peak knee external rotation)각도에서는 $15.628^{\circ}$의 차이를 나타냈다. 또한, 각 분절마커세트 내에서 두 가지의 다른 무릎관절 중심의 정의가 얼마나 무릎도 산출에 영향을 미치는지를 비교했을 때 무릎의 최대외측회전(peak external rotation)각에서 차이를 나타내었다. 첫 번째 분절마커세트의 무릎관절중심정의의 형태변화에 따라 최대외측회전각은 $0.549^{\circ}$의 차이를 나타냈고, 두 번째 분절마커 세트에서 무릎관절중심정의의 형태변화에 따라 최대외측회전각은 $0.309^{\circ}$의 차이를 나타냈다. 이와 같이 분절을 나타내는 마커세트와 무릎관절중심정의의 형태변화에 따라 무릎간을 계산하는데 있어서 결과가 다르게 산출되었다. 즉, 관절각의 계산이 분절에 부착되는 마커의 정의 혹은 위치에 매우 민감하게 영향을 받았다. 따라서 연구자가 여러 실험대상자들을 대상으로 실험시 마커세트 혹은 마커들을 동일한 위치에 가깝게 부착하는 것이 마커부착으로부터 발생하는 실험오차를 줄일 수 있을 것이다.