• Journal of Positioning, Navigation, and Timing
• /
• v.4 no.3
• /
• pp.131-140
• /
• 2015

Antennas at permanent GPS stations operated by the former Ministry of Government Administration and Home Affairs (MOGAHA) in Korea were replaced in years 2008 and 2009, and these changes caused abrupt discontinuities in precise coordinate time series. In this study, an algorithm that eliminates those breaks was developed based on 15-year-long coordinate time series for the purpose of creating clean and continuous coordinate time series. The newly developed algorithm to correct for sudden jumps and dips in the GPS time series due to the antenna change was designed to consider all the linear and annual signals observed before and after the event. The accuracy of the new algorithm was confirmed to be at the Root Mean Square Error (RMSE) level of 2.3-2.6 mm. The new algorithm was also found to be capable of reflect site-specific characteristics at each station.

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.4
• /
• pp.287-295
• /
• 2022

The GNSS coordinate time series is used as important data for geophysical analysis such as terrestrial reference frame establishment, crustal deformation, Earth orientation parameter estimation, etc. However, various factors may cause discontinuity in the coordinate time series, which may lead to errors in the interpretation. In this paper, we describe the discontinuity in the coordinate time series due to the equipment replacement for domestic GNSS stations and discuss the change in movement magnitude and velocity vector difference in each direction before and after discontinuity correction. To do this, we used three years (2017-2019) of data from 40 GNSS stations. The average magnitude of the velocity vector in the north-south, east-west, and vertical directions before correction is -12.9±1.5, 28.0±1.9, and 4.2±7.6 mm/yr, respectively. After correction, the average moving speed in each direction was -13.0±1.0, 28.2±0.8, and 0.7±2.1 mm/yr, respectively. The average magnitudes of the horizontal GNSS velocity vectors before and after discontinuous correction was similar, but the deviation in movement size of stations decreased after correction. After equipment replacement, the change in the vertical movement occurred more than the horizontal movement variation. Moreover, the change in the magnitude of movement in each direction may also cause a change in the velocity vector, which may lead to errors in geophysical analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.662-671
• /
• 2020

It is crucial to manage and maintain the geodetic reference coordinates of GNSS continuously operating reference stations (CORSs) in consideration of their fundamental roles in geodetic control and positioning navigation infrastructure. Earthquake-induced crustal displacement directly impacts the reference coordinates, so such events should be promptly detected, and appropriate action should be made to maintain the target accuracy, including update of the geodetic coordinates. To this end, this paper deals with online schemes for the detection of persistent shifts in the coordinate time-series produced by an automatic GNSS processing system. Algorithms were implemented to test filtered results, such as hypothesis tests of the innovation sequence of a Kalman filter and a cumulative sum (CUSUM) test. The results were assessed by the time-series of coordinates of 14 CORS for two years, including the 2011 Tohoku earthquake. The results show that the global hypothesis test is practical for detecting abrupt jumps, whereas CUSUM is effective for identifying persistent shifts.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.11
• /
• pp.1467-1475
• /
• 2001

In the present paper, approximate coordinate transformations for simulation of turbulent flows with active wall motions, leading to a significant reduction in the computational cost while maintaining the numerical accuracy, are presented: the Navier-Stokes equations are coordinate-transformed with an approximation of Taylor-series truncation and neglect of some less-significant terms. The performance of the proposed transformations is evaluated in simulation of the channel flow at Re$\sub$$\tau$/=140 with wall deformations of │η$\sub$m/$\^$+/ 5. The approximate transformations provide flow structures as wall as turbulence statistics in good agreement with those from a complete coordinate transformation [Phys. Fluids 12, 3301 (2000)] and allow 25-30% savings in the CPU time as compared to the complete one.

• Journal of the Korea Convergence Society
• /
• v.10 no.12
• /
• pp.17-22
• /
• 2019

Network attack analysis and visualization methods using network traffic session data detect network anomalies by visualizing the sender's and receiver's IP addresses and the relationship between them. The traffic flow is a critical feature in detecting anomalies, but simply visualizing the source and destination IP addresses symmetrically from up-down or left-right would become a problematic factor for the analysis. Also, there is a risk of losing timely security situation when designing a visualization interface without considering the temporal characteristics of time-series traffic sessions. In this paper, we propose a visualization interface and analysis method that visualizes time-series traffic data by using the radial axis, divide IP addresses into network and host portions which then projects on the cylindrical coordinate system that could effectively monitor network attacks. The proposed method has the advantage of intuitively recognizing network attacks and identifying attack activity over time.

• Journal of Mechanical Science and Technology
• /
• v.16 no.5
• /
• pp.703-709
• /
• 2002

In the present paper, approximate coordinate transformations for simulation of turbulent flows with wall deformation, significantly reducing computational cost with little degradation in numerical accuracy, are presented. The Wavier-Stokes equations are coordinate-transformed with an approximation of Tailor-series truncation. The performance is evaluated by performing numerical simulations of a channel flow at Re$\sub$$\tau$/ = 140 with active wall motions of η$\sub$m/$\^$+/ $\leq$5. The approximate transformations provide flow structures as well as turbulence statistics in good agreement with those from a complete transformation [Phys. Fluids 12, 3301 (2000) ] and allow 25-30% savings in the CPU time as compared to the complete one.

• Journal of Astronomy and Space Sciences
• /
• v.36 no.4
• /
• pp.283-292
• /
• 2019

The purpose of this study was to develop a period analysis algorithm for detecting new variable stars in the time-series data observed by charge coupled device (CCD). We used the data from a variable star monitoring program of the CBNUO. The R filter data of some magnetic cataclysmic variables observed for more than 20 days were chosen to achieve good statistical results. World Coordinate System (WCS) Tools was used to correct the rotation of the observed images and assign the same IDs to the stars included in the analyzed areas. The developed algorithm was applied to the data of DO Dra, TT Ari, RXSJ1803, and MU Cam. In these fields, we found 13 variable stars, five of which were new variable stars not previously reported. Our period analysis algorithm were tested in the case of observation data mixed with various fields of view because the observations were carried with 2K CCD as well as 4K CCD at the CBNUO. Our results show that variable stars can be detected using our algorithm even with observational data for which the field of view has changed. Our algorithm is useful to detect new variable stars and analyze them based on existing time-series data. The developed algorithm can play an important role as a recycling technique for used data

• Structural Engineering and Mechanics
• /
• v.31 no.6
• /
• pp.663-678
• /
• 2009

An exact solution is obtained for forced torsional vibration of a finite class 622 piezoelectric hollow cylinder with free-free ends subjected to dynamic shearing stress and time dependent electric potential at both internal and external surfaces. The solution is first expanded in axial direction with trigonometric series and the governing equations for the new variables about radial coordinate r and time t are derived with the aid of Fourier series expansion technique. By means of the superposition method and the separation of variables technique, the solution for torsional vibration is finally obtained. Natural frequencies and the transient torsional responses for finite class 622 piezoelectric hollow cylinder with free-free ends are computed and illustrated.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.164-169
• /
• 2001

A comprehensive extension of functions and efficiency of the software system, DS/Block, developed earlier for the purpose of simulation of the motion of a ship block during lifting and turnover operation. A viewpoint change used in 3D-CAD is utilized and saves the time for displays of a series of configurations for the motion. The Euler parameters are adopted to convert 3 rotational degrees of freedom about global coordinate system to those about local coordinate system defined in Pro/ENGINEER. DS/Block provides FEM input data for stress and strain analyses. Several functions are incorporated for user-friendliness. DS/Block is to be tested and installed in a shipyard.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.4
• /
• pp.379-385
• /
• 2000

In order to evaluate the stability of permanent GPS arrays for obtaining high precision coordinates, spectral analysis uses the least square spectrum analysis to the coordinate variations of Suwon, Tsukuba and Sanghai stations. Permanent GPS observations at Suwon, Tsukuba and Sanghai have been more or less continuously carried out since 1994. Time series of the resulting coordinate variations are analyzed for long term repeatability and periodic behaviour.