• International Journal of Precision Engineering and Manufacturing
• /
• 제4권2호
• /
• pp.13-22
• /
• 2003

To coordinate the robot manipulator along the desired trajectory, the exact model of the dynamics is required. The added mass and added moment of inertia, buoyancy, drag force, and friction mainly affect the dynamics of the undersea robot manipulator, and they are quite complex and unknown. In this reason. the exact model of the undersea robot manipulator is difficult to obtain. In this paper, instead of having efforts to get the exact model of the robot dynamics, a control-based approach was performed. We modeled the dynamics of the undersea robot manipulator whose parameters are unknown, and then applied a proposed direct adaptive and robust control, which is different from previous studies. The unknown added mass, and added moment of inertia, drag force and friction are estimated by the direct adaptive control scheme, and the drag force which is dominant disturbance is compensated by the robust control. Also, stability of the proposed control scheme is analyzed.

• 제어로봇시스템학회논문지
• /
• 제16권8호
• /
• pp.727-734
• /
• 2010

This paper deals with an anti-sway control for a ship-mounted container crane which is disturbed by the wave-induced motions of the ship. We derive a simple dynamics of the ship-mounted container crane with an active anti-sway control system and transform it into a dynamic function for a horizontal variable on the absolute coordinate. Then we propose an control method to reduce pendulation of the spreader and compare its performance with well-known feedback linearization control in computer simulation.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권2호
• /
• pp.218-228
• /
• 2003

A hydraulic system is modeled as the second order differential equation with uncertain system parameters and disturbance composed of modeling errors. To Position the load of the hydraulic system to a desired point. the servo valve of the hydraulic system is controlled. As a control scheme. a global sliding mode control(GSMC) is Proposed Since the servo valve has a torque limit. the GSMC is designed to coordinate the position of the load along the minimum time trajectory within the torque limit. The Proposed control scheme can be designed with ranges of parametric uncertainties and specified torque limits. By the proposed control scheme, the closed form solution of the arriving time at the desired position can be estimated.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1239-1243
• /
• 2007

Autonomous Station Control System is automatic route control system of large-scale station. The system has flexibility of system step-by-step construction and expandability. A method of step-by-step construction for Autonomous Station Control System has system expansion and subsystem software expansion. The system has autonomous controllability and autonomous coordinability for system step by step construction. With property for a basis, each of subsystem communicates data field. Also, Each subsystem has its own management system, Autonomous Data Manager to manage itself and coordinate with the others. This paper make clear test method for Autonomous Station Control System expansion and software expansion. The first test method of system increasing construction is single station construction test. The second of method is connecting test the neighbor's Autonomous Station Control System. The third of method is connecting test the Autonomous Line Management System. Also, the test method of software expansion take the case of route control subsystem.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.928-933
• /
• 1998

This paper presents a novel current control system to eliminate the steady state control error and to improve the transient characteristics for PWM AC-DC converter. A general mathematical model of the converter that is represented as a state-space model is first established. The state-space model is used for the simulation of PWM switching converter with the proposed current control system. The proposed sinusoidal tracking control system that does not require coordinate transformations using principle of the integral controller is described. It is proved that the steady state deviation reduces to zero through a transfer function of source current control system. Finally, it is seen that simulations agree with the experimental results in source current and reference of controlled ac current loop.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2362-2364
• /
• 2003

In this paper, behaviors performing controls of a mobile robots are designed based on the concept of closed-loop controls. A control architecture, in which the behaviors coordinate concurrently with one others to achieve a task is also proposed. In the control architecture, task manager allocates valid resources and configures the weight of the behavior outputs to achieve the task. For practical implementation, a rate modulation strategy based on RMS(Rate Modulation Strategy) is proposed for efficient resource allocations. The rate modulation strategy is performed with considering control stability. The efficiency of the proposed rate modulation strategy is validated through simulation tests.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 B
• /
• pp.336-338
• /
• 2000

Recently many studies have been performed for variable speed control of induction motor. Direct Torque Control(DTC) is emerging technique for variable speed control of PWM inverter driven induction motor. DTC allows the direct control of stator flux and instantaneous torque through simple algorithm. In this paper ASIC design technique using VHDL is applied to DTC based speed control of induction motor. ASIC for DTC based speed control is designed through the description of coordinate transformation, speed controller stator flux and torque estimator, stator flux and torque controller, stator flux position detector. FSM(Finite State Machine) and inverter voltage switching vector. Finally the above system has been implemented on the FPGA (XC4052XL-PG411). Simulation and experiment has been performed to verify the performance of the designed ASTC.

• 한국정보전자통신기술학회논문지
• /
• 제14권2호
• /
• pp.140-148
• /
• 2021

본 논문에서는 대잠 작전 시 가장 필수적으로 사용되는 탐지체계인 소노부이를 스마트 기기의 LTE 통신과 접목시켜 가용성을 개선하고자 한다. 북한 잠수함 세력의 위협을 받고 있는 현 상황에서 이에 대응하기 위한 대잠능력은 점점 더 중요해지고 있으며, 지속적인 연구 및 개발이 필요하다. 본 논문은 배에 설치된 군 전용 LTE 통신 시스템과 이에 연동 가능한 스마트기기 그리고 이들의 통제를 받는 다중상태 소노부이를 이용하여 음향 전술의 능력을 높이고자 한다. 제안된 시스템은 각각의 소노부이의 정확한 좌표 정보를 스마트기기에 수신하여 좌표 수치를 표시할 뿐만 아니라 지도에 마커를 표시함으로써 시각적인 효과를 증대시킬 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.160-163
• /
• 1991

Permanent Magnet Synchronous Motor(PMSM) has merits in both simple electrical controllability of dc motor and mechanical reliability of ac motor by applying vector control. The vector control method orients the armature current phasor to be perpendicular to the permenant magnet rotor flux in a two-axis coordinate frame, and provides control characteristics that are similar to those of separately excited dc motors. This paper presents a simple model following scheme for position control of PMSM fed by hysteresis current-controlled PWM inverter. The simulation results show the validity of the proposed control method.

• 한국정밀공학회지
• /
• 제11권6호
• /
• pp.20-27
• /
• 1994

This paper presents a controller design to coordinate a robot manipulator under unknown system parameters and bounded disturbance inputs. To control the motion of the manipulator, an inverse dynamics control scheme is applied. Since parameters of the robot manipulators such as mass and inertia are not perfectly known, the difference between the actual and estimated parameters works as a disturbance force. To identify the unknown parameters, an improved adaptive control algorithm is directly derived from a chosen Lyapunov's function candidate based on the Lyapunov's Second Method. A robust control algorithm is devised to counteract the bounded disturbance inputs such as contact forces and disturbing forces coming from the difference between the actual and the estimated system parameters. Numerical examples are shown using three degree-of-freedom planar arm.