• 제목/요약/키워드: Cooling system in ship

검색결과 47건 처리시간 0.022초

CFD를 이용한 선박용 해수펌프의 공동현상에 대한 분석 (Cavitation Analysis on Ship Seawater Pump Using CFD)

  • 김부기;김홍렬;양창조;김준호
    • 해양환경안전학회지
    • /
    • 제23권4호
    • /
    • pp.400-406
    • /
    • 2017
  • 선박용 입형 편흡입 원심 해수펌프의 회전체와 파이프 시스템 내부에 발생한 과도한 손상의 원인을 분석하고자 실제 모델을 역설계 하였다. 이를 위해 전산유체역학(CFD)을 이용하여 해수냉각펌프의 내부유동 분석을 실시하였다. 결과적으로 역설계를 통한 대상펌프의 형상 및 경계조건을 설정하여 설계 운전점인 $125m^3/h$에서의 펌프 효율은 85.3 %, 양정 32.0미터로 계산되었다. 대상 펌프의 최고 효율점은 $150m^3/h$에서 약 86.2 %로 예측되었으나 실제 운전점과는 차이가 있었다. 최저 유량점인 $112.5m^3/h$에서는 저 유량점 특성상 유동이 불안정하여 해석의 수렴이 좋지 않았다. 선박에서 운전 중인 해수펌프 및 파이프 시스템 전반에 걸쳐 진행 중인 공동현상의 원인 규명을 통해 개선방안을 도출하고자 하였으나, 입 출구 전체 파이프 시스템의 계산, 각 지관들에 대한 유량 및 유속 측정 등을 통해 보다 명확한 원인분석을 위한 후속연구가 필요하다.

구리의 내식성에 미치는 어닐링 열처리의 영향 (Effect of Annealing Heat Treatment to Corrosion Resistance of a Copper)

  • 김진경;문경만;이진규
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제29권6호
    • /
    • pp.654-661
    • /
    • 2005
  • Copper is a well known alloying element that is used to improve the resistance to general corrosion of stainless steel And also Cu cation have the anti-fouling effect to inhibit adhesion of the marine algae and shellfish to the surface of heat exchanger cooling pipe or outside wall of the ship, Therefore there are some anti-fouling methods such as anti-fouling Paint mixed with copper oxide or MGPS(Marine Growth Preventing System) by using Cu cation dissolved to the sea wather solution. Cu cation can be dissolved spontaneously by galvanic current due to Potential difference between Cu and cooling pipe of heat exchanger with Ti material, which may be one of the anti-fouling designs. In this study the effect of annealing heat treatment to galvanic current and Polarization behavior was investigated with a electrochemical points of view such as measurement of corrosion Potential, anodic polarization curve. cyclic voltammetric curve, galvanic current etc The grain size of the surface in annealed at $700^{\circ}C$ was the smallest than that of other annealing temperatures. and also the corrosion Potential showed more positive potential than other annealing temperatures. The galvanic current between Ti and Cu with annealed at $700^{\circ}C$ was the largest value in the case of static condition. However its value in the case of flow condition was the smallest than the other temperatures. Therefore in order to increase anti-fouling effect by Cu cation, the optimum annealing temperature in static condition of sea water is $700^{\circ}C$, however non- heat treated specimen in the case of flow condition may be desirable.

Human Error Probability Assessment During Maintenance Activities of Marine Systems

  • Islam, Rabiul;Khan, Faisal;Abbassi, Rouzbeh;Garaniya, Vikram
    • Safety and Health at Work
    • /
    • 제9권1호
    • /
    • pp.42-52
    • /
    • 2018
  • Background: Maintenance operations on-board ships are highly demanding. Maintenance operations are intensive activities requiring high man-machine interactions in challenging and evolving conditions. The evolving conditions are weather conditions, workplace temperature, ship motion, noise and vibration, and workload and stress. For example, extreme weather condition affects seafarers' performance, increasing the chances of error, and, consequently, can cause injuries or fatalities to personnel. An effective human error probability model is required to better manage maintenance on-board ships. The developed model would assist in developing and maintaining effective risk management protocols. Thus, the objective of this study is to develop a human error probability model considering various internal and external factors affecting seafarers' performance. Methods: The human error probability model is developed using probability theory applied to Bayesian network. The model is tested using the data received through the developed questionnaire survey of >200 experienced seafarers with >5 years of experience. The model developed in this study is used to find out the reliability of human performance on particular maintenance activities. Results: The developed methodology is tested on the maintenance of marine engine's cooling water pump for engine department and anchor windlass for deck department. In the considered case studies, human error probabilities are estimated in various scenarios and the results are compared between the scenarios and the different seafarer categories. The results of the case studies for both departments are also compared. Conclusion: The developed model is effective in assessing human error probabilities. These probabilities would get dynamically updated as and when new information is available on changes in either internal (i.e., training, experience, and fatigue) or external (i.e., environmental and operational conditions such as weather conditions, workplace temperature, ship motion, noise and vibration, and workload and stress) factors.

3D 프린팅을 이용한 해수분사용 노즐 시제품 개발의 가능성 연구 (A Feasibility Study of Seawater Injection Nozzle Prototype Development by Using 3D Printing)

  • 윤석태;박종천;조용진
    • 한국산학기술학회논문지
    • /
    • 제22권3호
    • /
    • pp.51-57
    • /
    • 2021
  • 함정의 해수냉각 시스템은 화생방전에 의한 유해물질의 세척과 선체 외부의 적외선 신호를 저감하기 위해 설치된다. 시스템은 압력펌프, 각종 배관 그리고 해수분사용 노즐로 구성된다. 그리고 해수의 분사 압력과 노즐 종류에 따라 산포 범위가 결정된다. 따라서 해수의 산포 범위를 넓히고 해수냉각 시스템의 효율을 극대화하기 위해서는 적절한 분사 압력의 설정과 노즐의 최적 설계가 필요하다. 금속재료로 만들어지는 해수분사용 노즐은 초기 개발단계에서 금속 틀을 만들고 최적 성능을 만족할 때까지 수정된다. 이는 많은 시간과 비용을 유발하여 노즐개발에 어려움을 일으킨다. 따라서 본 연구에서는 해수분사용 노즐의 초기 개발단계에서 시제품을 생성하기 위한 3D 프린팅 기술의 적용 가능성을 확인하였다. 이를 위해 3D 프린팅 기술을 이용하여 압출 플라스틱 시험편을 제작하고 인장시험을 통해 시험편의 물리적 특성 값을 측정하였다. 그리고 측정 결과를 유한요소해석 조건에 적용해 해수의 분사 압력에 따른 노즐의 변형과 응력을 계산하였다. 유한요소해석 결과 노즐은 최적 압력에서 탄성 범위 내로 변화하였으며, 구조적으로 안정하다고 판단되어 본 연구의 가능성을 확인하였다.

선박동력용 SOFC/GT 하이브리드시스템의 성능 평가 (터빈 냉각 및 공기극 입구온도 일정 조건을 중심으로) (Performance Analysis of Marine Solid Oxide Fuel Cell and Gas Turbine Hybrid Power System (under Conditions of Turbine Cooling and Constant Temperature in Cathode Inlet))

  • 임태우;길병래;김종수;오세진;박상균;김만응;김명환
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제33권8호
    • /
    • pp.1107-1115
    • /
    • 2009
  • 석유에너지의 고갈과 지구온난화 등의 환경적 문제는 대기오염물질 배출규제 강화와 함께 고효율 및 친환경에 적합한 새로운 선박용 동력장치의 필요성을 제기하고 있다. 최근 이와 같은 문제들을 근본적으로 해결하기 위한 지속가능한 방법으로서 연료전지를 선박의 동력발생장치로 도입하고자 하는 검토가 진행되고 있다. 본 논문은 대형 선박용으로 적합한 고체산화물형 연료전지/가스터빈 하이브리드시스템의 특성을 분석한 것으로 공기극 입구온도를 일정으로 제어하는 경우에 대한 시스템의 성능 및 안전성 등에 관한 문제를 다루고 있다.

Numerical Modeling for Systematization of Line Heating Process

  • Shin, Jong-Gye;Kim, Won-Don;Lee, Jang-Hyun
    • Journal of Hydrospace Technology
    • /
    • 제2권1호
    • /
    • pp.41-54
    • /
    • 1996
  • Sculptured surface structures such as ship hulls are traditionally formed up to the required double curved shape by line heating method. The nature of the line heating process is a transient thermal process, followed by a thermo-elastic-plastic stress field. The permanant shape is dependent on many factors involved in the process, Among them are torch speed and path, supplied heat type and amount , and plate size. Thus, the work is essentially leaded by experts with lots of experiences. However, in order to effectively improve productivity through automation, each factor should be clearly examined how much it affects the final shape. This can not be done only by experiments, but can be achieved by a mechanics-based approach. In this paper, we propose a conceptual configuration for plate forming system, and then present simulations of the line heating process with numerical data in practices and suggest a computerized process of the line heating for practical applications. The modeling of heating torch, water cooling, and the plate to be formed is proposed for the finite element analysis after the mechanics of line heating is studied. Parametric studies are given and discussed for the effects of plate thickness, torch speed and initial curvature in forming a saddle typed surface.

  • PDF

수중용접한 국산 SM41A-2강판의 편진반복 인장하중하의 피로강도특성에 관한 연구 (Study on tension-tension fatigue strength properties of underwater welded joints of SM41A-2 Plate-to-Plate)

  • 오세규;박주성;한상덕
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제11권2호
    • /
    • pp.71-81
    • /
    • 1987
  • Nowadays, the high development of industrial technique demands the optimal design of marine structures to be welded under the water, because the underwater welding of the ship hull and marine structures can decrease manpower and cost of production. However there is not available at present any report on fatigue behavior about underwater welded joints. In this paper under tention- tension repeated fatigue stress with frequency of 10 cycles per second by local controlled system, the fatigue strength properties of underwater welded joints of SM41A-2 Plate-to-Plate of 10 mm thickness were experimentally examined. The results obtained were as follows : 1) The fatigue strength of underwater welded joints of SM41A-2 was peaked at the heat input of about 1, 400 joule/mm(180 A, 36 V), while, at the heat input of more than about 1, 100 joule/mm (160 A, 33 V) that of the underwater welds at the higher than cycle of life rather than the lower cycle was higher than that of the base metal but lower than that of the atmosphere welds on account of both cooling and notch effects. 2) The fatigue limit of underwater welds increased with an increase of heat input resulting in a peak of that at the heat input of about 1, 400 joule/mm and then decreased gradually. 3) The fatigue strength at N cycles was peaked between the heat input of about 1, 400 and 1, 700 joule/mm where the strain was rapidly increased. 4) It was confirmed that the optimal zone of heat input condition for obtaining the underwater welds fatigue strength higher than that of the base metal exists, and if out of this zone, the fatigue strength of the underwater welds was lower than that of the base metal because of lack weld penetration, inclusion of slag, voids, etc. 5) By the fatigue test, the underwater welds fractured brittly without visual deformation, so the strain was remarkably less than of the atmosphere welds. 6) The fatigue life factor was peaked at the heat input of about 1, 600 joule/mm (200 A, 36 V) at which the mean strain is a little higher than that of the base metal but quite lower than those of the atmosphere welds, resulting in good underwater welds because both fatigue strength and ductility of the underwater welds are higher than those of the base metal at such heat input.

  • PDF