• 반도체디스플레이기술학회지
• /
• 제15권2호
• /
• pp.74-80
• /
• 2016

This study presents a thermal device specially designed for thermal nanoimprint lithography equipments, which requires the capability of rapid heating and cooling, high temperature uniformity and the material strength to endure high stamping pressure. The proposal to meet these requirements is a planar-type hot plate extensible to a large area, in which long circular cartridge heaters and heat pipes are installed inside in parallel. The heat pipes are connected to the outside water cooling chamber. A hot plate made of stainless steel is fabricated with a dimension $240mm{\times}240mm{\times}20mm$. Laboratory experiments are conducted to examine the thermal performance of the hot plate. The results illustrate that the employment of heat pipes leads to a notable enhancement of temperature uniformity in the device and provides an efficient heat delivery from the hot plate to outside. It is verified that the suggested hot plate could be a feasible thermal tool for thermal nanoimprint lithography, satisfying the major design requirements.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.175-180
• /
• 2008

This paper is dedicated to the development of cooling devices such as mLHP with Fan-Fin system limited by noise and vibration. As we know, Heat pipe has the limitation of cooling capability to cool down the electronics. It is bounded by capillary and thermal limitation but heat load that it has to deal with is increasing. Especially Today's electronic technology has a tendency to integrate lots of function into the small piece of a processor like Dual core having 35W heat load for mobile and desktop computer respectively. There is an optimum operating condition of temperature, below $70^{\circ}C$, during the maximum heat load, 35W. There is the motivation needed to develop the new type of cooling devices and we can discuss about the new challenge beyond heat pipe.

• 한국추진공학회지
• /
• 제11권5호
• /
• pp.78-84
• /
• 2007

탄화수소계 연료를 사용하는 재생냉각 로켓엔진 연소기에서는 벽면온도가 올라감에 따라 냉각채널 벽면에 화합물이 침전되는 코킹현상이 발생하는 것으로 알려져 있다. 이 현상은 냉각 유체에 의한 냉각 성능을 감소시키고 결과적으로 과열에 의한 연소기 손상을 야기할 수 있다. 본 논문에서는 재생냉각채널을 모사하는 전기가열장치 실험결과를 소개하고 실험결과를 바탕으로 구리합금과 탄화수소계 연료(Jet A-1)와의 적합성에 대해서 검토하였다.

• 한국전자통신학회논문지
• /
• 제9권11호
• /
• pp.1291-1296
• /
• 2014

열전 냉각기는 냉온 정밀온도제어가 가능하고, 소형화 및 경량화가 가능할 뿐만 아니라 기계적인 진동이 없어 신뢰성을 높일 수 있다는 장점 때문에 다양한 분야에 적용이 시도되고 있다. 하지만 열적 모델링 및 해석이 요구되기 때문에 적용분야에 최적한 열전 냉각기를 설계하는 것은 쉽지 않다. 따라서 본 연구에서는 SINDA/FLUINT 해석법을 이용하여 열전 냉각기 모델링과 크기 결정 문제 그리고 열적해석 등을 연구함으로서 열전 냉각기의 적용을 위한 기반기술을 확립하고자 한다.

• 한국화재소방학회논문지
• /
• 제23권6호
• /
• pp.57-65
• /
• 2009

미분무 소화시스템을 이용하여 철도차량 내부 화재진압 실험을 수행하였다. 실험차량은 실물 철도차량이며, 화재시나리오는 표면화재 1종, 유류화재 1종, 그리고 미분무 소화시스템에 의한 화재 공간 내의 공간 냉각 능력을 조사하기 위한 차폐화재 1종 등 총 3종이었다. 실험에 사용된 소화시스템은 6종으로, 일정압력을 가지는 소화시스템 5종, 질소가압 압력용기로부터 분사되는 소화시스템 1종이다. 실험 결과 미분무 소화시스템이 철도 차량 내부의 화재를 효과적으로 소화시키거나, 소화가 되지 않더라도 우수한 공간 냉각 능력으로 화재 피해를 최소화할 수 있음을 알았다.

• Nuclear Engineering and Technology
• /
• 제53권4호
• /
• pp.1134-1145
• /
• 2021

A design parameter study is presented for the closed-loop type passive containment cooling system (PCCS) which is equipped with two heat exchangers: one installed at the inside of the containment and the other submerged in the water pool at the outside of the containment. A GOTHIC code model for PCCS performance analyses was set up and the design parameters such as the heat exchanger sizes, locations, and water pool tank volumes were analyzed to investigate the feasibility of installing this type of PCCS in PWRs like OPR-1000 being operated in Korea. We identified the size of the circulation loop and heat exchangers as major design parameters affecting the performance of PCCS. The analyses showed that the heat exchangers in the inside of the containment would be more influential on the heat removal capability of PCCS than that installed in the water pool at the outside of the containment. Hence, it was recommended to down-size the heat exchangers in the water pool to optimize PCCS without compromising its performance. Based on the parametric study, it was demonstrated that a closed-loop type PCCS could be designed sufficiently compact for installation in the available space within the containment of PWRs like OPR-1000.

• 한국초전도ㆍ저온공학회논문지
• /
• 제11권1호
• /
• pp.64-68
• /
• 2009

To keep the superconducting (SC) magnet coils of KSTAR at proper operating conditions, not only the coils but also other cold components, such as thermal shields (TS), magnet structures, SC bus-lines (BL), and current leads (CL) must be maintained at their respective cryogenic temperatures. A helium refrigeration system (HRS) with an exergetic equivalent cooling power of 9kW at 4.5K without liquid nitrogen $(LN_2)$ pre-cooling has been manufactured and installed for such purposes. In this proceeding, we will present the commissioning and initial operation results of the KSTAR HRS. Circuits which can simulate the thermal loads and pressure drops corresponding to the cooling channels of each cold component of KSTAR have been integrated into the helium distribution system of the HRS. Using those circuits, the performance and the capability of the HRS, to fulfill the mission of establishing the appropriate operating condition for the KSTAR SC magnet coils, have been successfully demonstrated.

• 한국수소및신에너지학회논문집
• /
• 제34권6호
• /
• pp.667-672
• /
• 2023

This study proposes polymer electrolyte membrane fuel cell (PEMFC) based cogeneration system for greenhouse heating and cooling. The main scope of this study is to examine the proposed cogeneration system's suitability for the 660 m²-class greenhouse. A 25 kW PEMFC system generates electricity for two identical air-cooled heat pumps, each with a nominal heating capacity of 70 kW and a cooling capacity of 65 kW. Heat recovered from the fuel cell supports the heat pump, supplying hot water to the greenhouse. In cooling mode, the adsorption system provides cold water to the greenhouse using recovered heat from the fuel cell. As a result, the cogeneration system satisfies both heating and cooling capability, performing 175 and 145 kW, respectively.

• 대한기계학회논문집
• /
• 제18권3호
• /
• pp.729-737
• /
• 1994

A three-dimensional finite element model of a 20-pin plastic dual-in-line package(PDIP) plugged into a PCE has been developed by using the finite element code ANSYS. The model has been used for thermal characterization of the package during its normal operation under natural convection cooling. Temperature distributions in the package and PCB are obtained from numerical analysis and compared with experimentally measured data. Various cases are assumed and analyzed to study the effects of package and PCB materials on thermal characteristics of PDIP with and without aluminum heatspreader. Thermal dissipation capability of PDIP is greatly increased due to copper die pad/lead frame and heatspreader. However, thermally induced stresses in the package and fatigue life of chip are improved for PDIP with Alloy 42 die pad/lead frame and no heatspreader. It is also found that the role of PCB on thermal characteristics of PDIP is very imporatant.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제26회 춘계학술대회논문집
• /
• pp.181-184
• /
• 2006

당사에서는 액체산소 (LOX)와 액체메탄 (LNG)를 추진제로 사용하며, 고성능의 터보펌프가 장착된 추력 10톤급 액체로켓 엔진의 개발에 성공하였다. 이러한 개발 성공은 액체메탄을 이용한 재생냉각에 대한 성능 입증, 액체산소와 액체메탄으로 구동되는 터보펌프에 대한 성능 입증, 가스발생기에 의한 터보펌프의 구동 및 추진제 가압 성능 확인, 등을 완벽히 구현함으로써 메탄 엔진 (CHASE-10)의 상업화에 보다 근접하였다고 할 수 있다.