• 제목/요약/키워드: Cooled

검색결과 2,246건 처리시간 0.026초

고온기 재배시설에 따른 털목이 '건이'의 생육 특성 (Cultural characteristics of Auricularia polytricha 'Geoni' in a high temperature growth room)

  • 김길자;김다미;안호섭;최진경;권오도
    • 한국버섯학회지
    • /
    • 제17권1호
    • /
    • pp.7-11
    • /
    • 2019
  • 흑목이 재배가 어려운 고온기에 에너지와 시설투자비용을 절감할 수 있는 재배방법을 틈새소득작물로 알아보기 위해 간이재배사와 공조재배사에서 털목이 '건이'의 재배특성을 비교하였다. 시험은 6월 15일부터 7월 13까지 3일 간격으로 밀폐형 공조시설재배사와 비닐하우스 간이재배사에 톱밥봉지배지(0.9 kg)를 입상하여 7월 26까지 수확하였다. 생육조건은 공조재배사는 온도 $23^{\circ}C$, 습도 90~95% 조건을 유지하면서 1회/일 관수하였고 간이재배사는 2~3회/일 관수로 온도조절시설은 가동하지 않았다. 그 결과 간이재배사에서 재배한 자실체크기는 공조재배사보다 다소 컸으며, 물리성은 큰 차이를 보이지 않았다. 또한 자실체 명도는 간이재배사가 공조재배사보다 낮아 진한색을 나타냈다. 입상시기별로 수량성은 차별화된 경향을 찾을 수 없었으며 하우스 재배사의 경우 308 g/0.9 kg, 공조재배사에서는 252 g/0.9 kg으로 하우스 재배사에서 22% 더 높았다. 따라서 털목이 '건이' 품종은 여름철 냉방기를 가동하지 않는 간이재배사에서 재배가 가능하여 틈새소득작물로 에너지 비용 절감 효과가 기대되었다.

비활동성 여성의 고강도 인터벌 운동과, 중강도 지속적 운동이 감정적 반응과 신경전달물질에 미치는 영향 (The Effects of High-intensity Interval Exercise and Moderate-intensity Continuous Exercise on Emotional Response and Neurotransmitters in Low-active Women)

  • 최재일
    • 한국체육학회지인문사회과학편
    • /
    • 제58권4호
    • /
    • pp.447-459
    • /
    • 2019
  • 이 연구는 비활동 여성 30명을 대상으로 중강도 지속 운동(moderate-intensity continuous exercise; MICE)과 고강도 인터벌 운동(high-intensity interval exercise; HIIE) 시 감정적 반응과 신경전달물질의 차이를 규명하기 위해 실시되었다. 두 집단 모두 설계된 일회성 트레드밀 운동을 실시하였고, 동일한 운동을 1주일 간격으로 총 3회 반복 실시하였다. MICE는 환기역치(VT) 50% 수준에서 5분간 준비운동 후 90%VT 수준에서 25분간 지속운동을 실시하였고 다시 50%VT 수준에서 5분간 정리운동을 실시하였다. HIIE는 115%VT 수준에서 2분간 6회 반복하였고, 중간의 운동성 회복은 85%VT 수준에서 2분간 4회 반복하였다. 통계분석결과 MICE는 첫 번째 실험에서 운동 중 감정반응과 운동 후 즐거움에 대해 긍정적으로 나타났지만 세 번째 실험에서는 부정적으로 나타났다. 반대로 HIIE는 첫 번째 실험에서 운동 중 감정반응과 운동후 즐거움에 대해 부정적으로 나타났지만 세 번째 실험에서는 긍정적으로 나타났다. 신경전달물질의 경우 3번의 실험에서 두 집단 모두 운동전에 비해 운동 10분 후 유의하게 증가한 것으로 나타났다. 종합해볼 때 비활동 여성에게 HIIE 운동이 운동순응을 높이는 전략이 될 수 있다고 판단된다.

V2O3와 CaO의 농도에 따른 5-성분계 석유코크스 슬래그의 점도 변화 (Effect of V2O3 and CaO Concentrations on the Viscosity of 5-Component Petcoke Slag)

  • 양윤정;오명숙
    • 공업화학
    • /
    • 제31권6호
    • /
    • pp.688-696
    • /
    • 2020
  • 가스화 공정에서 원료 회분의 연속적인 제거를 위해 회분 성분에 따른 점도 거동뿐만 아니라, 온도가 낮아지면서 형성되는 결정체가 점도에 미치는 영향이 연구되어야 한다. 본 연구에서는 석유코크스 슬래그의 주성분 중 CaO와 V2O3 성분의 변화에 따른 슬래그의 점도 거동과 결정 분석을 통해 이 두 성분이 석유코크스 슬래그 점도에 미치는 영향을 조사하였다. 각각의 함유량을 변화시키면서 약 1600 ℃부터 약 1100 ℃까지 온도를 낮추며 점도를 측정하였고, 냉각된 시료의 결정상이 분석되었다. 측정된 시료는 대부분 결정형 점도 거동을 보여주었다. V2O3의 농도가 증가할수록 점도는 유리형에서 결정형으로 변화하였고, Tcv도 증가하는 경향을 보여주었다. CaO의 경우 농도가 증가할수록 낮은 점도와 낮은 Tcv를 보여주었다. 기준 시료를 포함한 모든 시료의 상, 중, 하부에서 다른 결정을 볼 수 있었다. 상, 중부에는 anorthite와 Ca-V 상이 관찰되었으면 하부에서는 주로 V2O3 결정과 anorthite이 관찰되었다. 슬래그의 바나듐은 Ca-V상, V-Fe, 용융 슬래그 상을 형성한다. 융점이 낮은 Ca-V 상은 점도를 낮추는데 기여하는 것으로 보인다.

Heat transfer analysis in sub-channels of rod bundle geometry with supercritical water

  • Shitsi, Edward;Debrah, Seth Kofi;Chabi, Silas;Arthur, Emmanuel Maurice;Baidoo, Isaac Kwasi
    • Nuclear Engineering and Technology
    • /
    • 제54권3호
    • /
    • pp.842-848
    • /
    • 2022
  • Parametric studies of heat transfer and fluid flow are very important research of interest because the design and operation of fluid flow and heat transfer systems are guided by these parametric studies. The safety of the system operation and system optimization can be determined by decreasing or increasing particular fluid flow and heat transfer parameter while keeping other parameters constant. The parameters that can be varied in order to determine safe and optimized system include system pressure, mass flow rate, heat flux and coolant inlet temperature among other parameters. The fluid flow and heat transfer systems can also be enhanced by the presence of or without the presence of particular effects including gravity effect among others. The advanced Generation IV reactors to be deployed for large electricity production, have proven to be more thermally efficient (approximately 45% thermal efficiency) than the current light water reactors with a thermal efficiency of approximately 33 ℃. SCWR is one of the Generation IV reactors intended for electricity generation. High Performance Light Water Reactor (HPLWR) is a SCWR type which is under consideration in this study. One-eighth of a proposed fuel assembly design for HPLWR consisting of 7 fuel/rod bundles with 9 coolant sub-channels was the geometry considered in this study to examine the effects of system pressure and mass flow rate on wall and fluid temperatures. Gravity effect on wall and fluid temperatures were also examined on this one-eighth fuel assembly geometry. Computational Fluid Dynamics (CFD) code, STAR-CCM+, was used to obtain the results of the numerical simulations. Based on the parametric analysis carried out, sub-channel 4 performed better in terms of heat transfer because temperatures predicted in sub-channel 9 (corner subchannel) were higher than the ones obtained in sub-channel 4 (central sub-channel). The influence of system mass flow rate, pressure and gravity seem similar in both sub-channels 4 and 9 with temperature distributions higher in sub-channel 9 than in sub-channel 4. In most of the cases considered, temperature distributions (for both fluid and wall) obtained at 25 MPa are higher than those obtained at 23 MPa, temperature distributions obtained at 601.2 kg/h are higher than those obtained at 561.2 kg/h, and temperature distributions obtained without gravity effect are higher than those obtained with gravity effect. The results show that effects of system pressure, mass flowrate and gravity on fluid flow and heat transfer are significant and therefore parametric studies need to be performed to determine safe and optimum operating conditions of fluid flow and heat transfer systems.

만두의 조리방법에 대한 문헌적 고찰;조선시대 만두의 종류와 조리방법에 대한 문헌적 고찰(1400년대${\sim}$1900년대까지) (The A Literary Investigation on Mandu (Dumpling);Types and Cooking Methods of Mandu (Dumpling) During the Joseon Era (1400's${\sim}$1900's))

  • 복혜자
    • 한국식생활문화학회지
    • /
    • 제23권2호
    • /
    • pp.273-292
    • /
    • 2008
  • Among all the ingredients usedin mandu, the following types were used:, 13 types of grains were used (12.38%), 30 types of vegetables, fruits, bulbs,and nuts were used (28.57%), 32 types of marine products, birds, meats, fishes, and shellfishes were used (30.48%), 10 types of functional ingredients were used (9.52%) and. For spices, 20 types of spices were used (19.05%). 2. Cooking Methods offor Mandu. The mMandu eaten at in the early Joseon era had was primarily made ofusedbuckwheat that contained boiled tofu or egg uiijuk in the kneaded dough for the most part and while kneading with buckwheat, the tofu or egg uiijuk has been boiled down to knead the dough, and and starch powder, bean powder, or rice powder, etc were mixed to make the mandu coating. Buckwheat powder was mixed toadded to the flourwer or was used by itself, while meat, vegetables, tofu, and shiitake mushroom, etc were also addedincluded. From the 18th century, the host plant, or cabbage kimchi, were prepared and combined had been sliced to be used as filling together while red pepper powder was mixed combined withto spices or vinegar soy sauce to be used together. Also, Radishes had beenwere also used as filling, but shown as not being used fromafter the start of the 1900's. For the shape of mMandu, it was madeinto different shapes such as as triangle, rectangle, date plum, gwebul, half moon, or pomegranate shapes, and then shapes to be boiled in simmering water, baked, or cooked as soup in clear broth for soup., In the 17th to 18th century, boilingthen in a steamer gradually became a cooking style, assumed the style of boiling in a steamer in $17th{\sim}18th$ century while in the 16th century,the an essay ofn fermenting flour in ‘Food Dimibang’ in 16th century had indicated it was cooked as the style ofby steaming in a rice steamer. Also, Mandu may have also contained the following: the thin-cut and boiled fish was cut out thin to put into the filling and boiled down, made by putting in added pine nuts after making bbeef jerky or boiled- down meat, fish, or shellfish itself to extractsand mold mandu only the ingredients combined withto put on starch powder, and then boiled down and put on pine nut powder finally, after it or cooled it wasdown to be eaten by dipping in vinegar soy sauce. In conclusion, many different types of mandu were made during the Joseon era using a variety ofwhile the ones using such various ingredients. are also one type of mandu.

Investigation of thermal hydraulic behavior of the High Temperature Test Facility's lower plenum via large eddy simulation

  • Hyeongi Moon ;Sujong Yoon;Mauricio Tano-Retamale ;Aaron Epiney ;Minseop Song;Jae-Ho Jeong
    • Nuclear Engineering and Technology
    • /
    • 제55권10호
    • /
    • pp.3874-3897
    • /
    • 2023
  • A high-fidelity computational fluid dynamics (CFD) analysis was performed using the Large Eddy Simulation (LES) model for the lower plenum of the High-Temperature Test Facility (HTTF), a ¼ scale test facility of the modular high temperature gas-cooled reactor (MHTGR) managed by Oregon State University. In most next-generation nuclear reactors, thermal stress due to thermal striping is one of the risks to be curiously considered. This is also true for HTGRs, especially since the exhaust helium gas temperature is high. In order to evaluate these risks and performance, organizations in the United States led by the OECD NEA are conducting a thermal hydraulic code benchmark for HTGR, and the test facility used for this benchmark is HTTF. HTTF can perform experiments in both normal and accident situations and provide high-quality experimental data. However, it is difficult to provide sufficient data for benchmarking through experiments, and there is a problem with the reliability of CFD analysis results based on Reynolds-averaged Navier-Stokes to analyze thermal hydraulic behavior without verification. To solve this problem, high-fidelity 3-D CFD analysis was performed using the LES model for HTTF. It was also verified that the LES model can properly simulate this jet mixing phenomenon via a unit cell test that provides experimental information. As a result of CFD analysis, the lower the dependency of the sub-grid scale model, the closer to the actual analysis result. In the case of unit cell test CFD analysis and HTTF CFD analysis, the volume-averaged sub-grid scale model dependency was calculated to be 13.0% and 9.16%, respectively. As a result of HTTF analysis, quantitative data of the fluid inside the HTTF lower plenum was provided in this paper. As a result of qualitative analysis, the temperature was highest at the center of the lower plenum, while the temperature fluctuation was highest near the edge of the lower plenum wall. The power spectral density of temperature was analyzed via fast Fourier transform (FFT) for specific points on the center and side of the lower plenum. FFT results did not reveal specific frequency-dominant temperature fluctuations in the center part. It was confirmed that the temperature power spectral density (PSD) at the top increased from the center to the wake. The vortex was visualized using the well-known scalar Q-criterion, and as a result, the closer to the outlet duct, the greater the influence of the mainstream, so that the inflow jet vortex was dissipated and mixed at the top of the lower plenum. Additionally, FFT analysis was performed on the support structure near the corner of the lower plenum with large temperature fluctuations, and as a result, it was confirmed that the temperature fluctuation of the flow did not have a significant effect near the corner wall. In addition, the vortices generated from the lower plenum to the outlet duct were identified in this paper. It is considered that the quantitative and qualitative results presented in this paper will serve as reference data for the benchmark.

임계간 온도에서 열처리한 구상흑연주철의 미세조직 및 경도 예측 (Prediction of Microstructure and Hardness of the Ductile Cast Iron Heat-treated at the Intercritical Temperatures)

  • 서남혁;전준협;송수영;김종수;김민수
    • 한국주조공학회지
    • /
    • 제43권6호
    • /
    • pp.279-285
    • /
    • 2023
  • 본 연구에서는 임계간 온도 범위에서 열처리한 구상흑연주철의 열처리 온도에 따른 물성 예측을 위해, 인장강도 450 MPa 급 구상흑연주철을 다양한 온도에서 열처리한 후 공냉하여 물성 예측에 필요한 미세조직을 분석하고 브리넬 경도를 측정하였다. 임계간 온도 구간에서 열처리 온도가 증가할수록 구상흑연주철 내 페라이트 분율은 감소함과 동시에 펄라이트 분율은 증가하였으나, 흑연 구상화율 및 구상흑연입수는 주방상태에서 측정된 값과 유사하였다. 열처리한 구상흑연주철의 브리넬 경도는 열처리 온도가 증가할수록 점점 증가하였다. 측정된 합금 조성 및 각 안정상의 분율, 그리고 문헌에 알려진 구상흑연주철의 브리넬 경도 예측 모델을 활용하여 열처리 온도 별 구상흑연주철의 경도 값을 계산해 본 결과, 측정값과 매우 유사한 값을 얻을 수 있었다. 또한 열역학 계산을 통해 예측된 상분율을 활용하여 정확한 경도 예측이 가능할지 확인해보기 위해, 열처리 온도 별로 구상흑연주철 내 흑연, 페라이트 및 오스테나이트의 부피를 계산한 후, 이를 면적으로 변환하여 동일한 구상흑연주철의 경도 예측 모델에 적용하였다. 이렇게 열역학 계산과 경도 예측 모델을 동시에 활용하여 계산된 구상흑연주철의 경도 값은 실제 측정한 브리넬 경도 대비 최대 27의 오차 범위 내에서 유사한 값을 나타내었다.

갑상선 미세유두암의 고주파 절제술 후 10년 경과 관찰 (Radiofrequency Ablation of Papillary Thyroid Microcarcinoma: A 10-Year Follow-Up Study)

  • 서유경;조성휘;심정석;양고은;조우진
    • 대한영상의학회지
    • /
    • 제82권4호
    • /
    • pp.914-922
    • /
    • 2021
  • 목적 이 연구는 갑상선 미세유두암을 고주파 절제술로 치료한 후 10년 이상 경과 관찰한 환자들의 결과를 통해 효과와 안전성을 평가하고자 했다. 대상과 방법 2006년 11월부터 2009년 12월까지 갑상선 미세유두암을 고주파 절제술로 치료받은 환자 5명을 대상으로 하였다. 이 환자들은 모두 조직검사를 통해 갑상선 미세유두암으로 진단을 받았고, 병변은 갑상선 내에 국한되어 있었으며, 전이의 증거가 없었고, 수술이나 전신마취가 의학적으로 부적합하거나 수술을 거부한 환자들이었다. 고주파 절제술은 고주파 발생기와 냉각기를 사용하여 한 명의 영상의학과 의사가 시행하였다. 우리는 시술과 연관된 부작용, 소작된 종양의 변화, 재발 여부, 국소 또는 림프절 전이 등에 대해 초음파 영상 소견과 의무 기록을 토대로 분석하였다. 결과 평균 경과 관찰기간은 130.6개월(범위, 121~159개월) 이었다. 세 명의 환자는 한 번의 고주파 절제술을, 두 명의 환자는 두 번의 시술을 받았다. 다섯 명의 환자 모두 시술과 연관된 부작용은 보이지 않았다. 다섯 개 중 세 개의 종양은 시술 후 완전히 사라졌으며 두 개의 종양은 최소한의 흔적으로 남아 평균 16.8개월의 경과 관찰기간 동안 큰 변화가 없었다. 가장 최근의 경과관찰에서 다섯 명의 환자 모두 국소 전이나 림프절 전이는 보이지 않았고 갑상선 글로불린(thyroglobulin)의 수치도 정상 범위였다. 결론 고주파 절제술은 수술에 부적합하거나 수술을 거부하는 저위험 갑상선 미세유두암 환자들에 대해서 효과적이고 안전한 치료법이 될 수 있다.

신선 곰취(Ligularia fischeri Turcz.) 잎 저장을 위한 CA 조성 최적화 (Optimized Controlled Atmosphere Regimen for Storage of Fresh Fischer's Ligularia (Ligularia fischeri Turcz.) Leaves)

  • 박윤문;김태완;김현석;김태훈;박유진
    • 원예과학기술지
    • /
    • 제33권3호
    • /
    • pp.375-382
    • /
    • 2015
  • 곰취의 수확 후 품질 유지와 출하시기 연장을 위한 MAP 저장의 기초 연구로서 3년에 걸쳐 CA 환경 최적화 연구를 수행하였다. 4월과 5월에 수확한 곰취는 차압통풍 예냉 방식으로 $4^{\circ}C$까지 품온을 낮춘 후 펀치 홀 MAP(일반 공기 조성과 같은 대조구) 및 CA 환경을 조성하였다. 대조구로서 MA 포장은 펀치 홀 천공 처리한 PP 필름 봉지를 활용하였다. CA 환경은 1년차에는 $O_2$ 1, 3% 2개 농도에 각각 $CO_2$ 5, 10%를 조합한 $2{\times}2$ 요인 처리, 2년차에는 $O_2$ 3% 고정에 $CO_2$ 0, 2.5, 5% 3개 처리, 3년차에는 $O_2$ 3%와 $CO_2$ 2.5, 5% 2개 처리를 설정하여 단계적인 최적화 과정을 거쳤다. 1년차 실험 결과, $O_2$ 1, 3%와 무관하게 $CO_2$ 10% 조합 CA 조건에서는 호흡속도의 감소와 함께 흑변 증상이 심하게 발생하였다. 2, 3년차에는 CA 저장에서도 장해 발생률이 뚜렷하게 나타나지 않았으나 4주 이상 저장 + 유통 후에는 대조구에 비해 다소 높은 경향이었다. 저장 4주 + 유통 5일 후에 조사한 조직감과 외관 상품성은 $O_2$ 3% + $CO_2$ 2.5% CA 저장에서 우수하였으나 CA 조성에 따른 저장기간 연장 효과는 크지 않았다. 연구 결과를 종합해 보면, 곰취는 이산화탄소 장해에 민감한 작물로서 상품성 유지를 위한 안전하고 효과적인 MAP 또는 CA 저장을 위한 $CO_2$ 농도 조성은 2.5% 수준이 적합한 것으로 판단되었다.

돼지정자의 동결융해 후 활력 및 생존성에 대한 보존액, 동해보호제, 예비동결 및 동결처리시간의 영향 (Effect of Cryodiluents, Cryoprotectants, Pre-freezing Method and Total Time Required for Freezing on Post-thaw Viability of Boar Spermatozoa)

  • 이장희;김인철
    • 한국가축번식학회지
    • /
    • 제23권2호
    • /
    • pp.165-174
    • /
    • 1999
  • 본 연구는 동결융해 후 정자의 생존성에 영향을 미치는 요인을 찾기 위하여 수행하였다. 동결융해 후 생존성에 대한 요인으로써 동결보존액, 동해보호제, 예비동결법 및 동결소요시간을 비교하였다. 동결과정중 정액의 질을 평가하기 위하여 활력, NAR 및 생존율을 조사한 결과는 다음과 같다. 돼지정액을 BF5, LYE, Soejima 및 modified Soejima 보존액으로 동결하였을 때 동결융해 후 정자활력은 M-Soejima 보존액이 44.5$\pm$6.4%로 다소 높았다. M-Soejima 보존액의 2차 회석액에 caffeine(2mM), heparin(l00 ${\mu}\ell$/$m\ell$) 및 caffeine+heparin 를 첨가하였을 때 동결융해 후 활력은 caffeine 첨가구가 61.7% 로 가장 높았으며, 단독 혹은 혼합첨가가 첨가하지 않은 대조구보다 유의적으로 높은 활력을 나타내었다 (p<0.05). M-Soejima 보존액에 동해보호제로서 glycerol(Gly), ethylene glycol(EG), propylene glycol(GP), Gly+EG 및 Gly+PG을 첨가하였을 때 동결융해 후 활력 및 NAR 율은 Gly+PG의 혼합첨가시 (31.3%/39.5%) 가 다른 첨가구보다 다소 높았으며 생존율은 Gly+EG 첨가구가 21.2% 로 다른 첨가구보다 다소 높았다. BE5와 M-Soejima 보존액으로 straw 및 pellet 동결법으로 동결하는 동안 dry ice-pellet, dry ice-straw 및 L$N_2$vapor-straw 법으로 예비동결하였을 때 각각 22.8, 47.5, 52.5% 및 42.5, 47.5, 57.5% 의 활력을 나타내었다. 또한 M-Soejima 보존액의 straw 법으로 l차 희석부터 동결완료까지 소요되는 시간을 2, 5 및 7시간으로 하였을 때 동결융해 후 활력 및 생존율은 처리간에 큰 차이가 없었으나, NAR 율은 처리시간이 길어질수록 다소 높은 경향을 나타내었다. 이러한 결과로 미루어 볼 때 동결융해 후 활력, NAR 및 생존율을 높이기 위해서는 caffeine 이 첨가된 M-Soejima 보존액에 동해보호제로 glycerol과 propylene glycol 또는 ehtylene glycol 을 사용하여 2시간 동안 빠르게 동결처리된 정액이 다소 유리할 것으로 사료되었다.

  • PDF