• 제어로봇시스템학회논문지
• /
• 제4권2호
• /
• pp.226-234
• /
• 1998

The concept of dynamic tracking line is proposed as the feasible tracking region for a robot in a robot-conveyor system, which takes the conveyor speed into consideration. This paper presents an effective method to identify the dynamic tracking line in a robotic workcell. The maximum line speed of a robot is derived in an analytic form using the parameterized dynamics and kinematics of the manipulator, and some of its properties are established mathematically. The identification problem of the dynamic tracking line is then formulated as a root-solving problem for a single-variable equation, and solved by using a simple numerical technique. Finally, numerical examples are presented to demonstrate the methodology and its applications in workspace specification.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1046-1051
• /
• 1991

For the conveyor tracking application of a robot manipulator, a new control scheme is presented. The presented scheme is divided into two stages : the upper one is the motion planning stage and the lower one is the motion control stage. In the upper stage, the nominal trajectory which tracks the part moving in a constant velocity, is planned considering the robot arm dynamics. On the other hand, in the lower level, the perturbed trajectory is generated to track the variation in the velocity of conveyor belt via sensory feedback and the perturbed arm dynamics. In both stages, the conveyor tracking problem is formulated as an optimal tracking problem, and the torque constraints of a robot manipulator are taken into account. Simulation results are then presented and discussed.

• 제어로봇시스템학회논문지
• /
• 제4권3호
• /
• pp.349-359
• /
• 1998

A robot control scheme for specific application a line-tracking system is newly presented. To improve the performance of line-tracking, robot arm dynamics and torque constraints are incorporated into the control scheme. The tracking problem for the workpiece on a variable-speed conveyor is formulated as an optimal tracking problem with specific criteria. Dividing the conveyor speed into the nominal term and the perturbed term, a two-stage control strategy is employed to cope with the nonlinearity and uncertainty of the robot-conveyor system. Simulation results are given to verify good tracking performance with fast cycle time and high accuracy in a robotic workcell.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.154-159
• /
• 1989

This paper presents a motion planning algorithm for conveyor tracking. We formulate the problem as the linear quadratic tracking problem in optimal control theory and solve it through dynamic programming. In the proposed algorithm, the steady-state tracking error is eliminated completely, and the joint torque, velocity, acceleration, and jerks are considered as some constraints. Numerical examples are then presented to demonstrate the utility of the proposed motion planning algorithm.

• 대한전기학회논문지
• /
• 제38권12호
• /
• pp.995-1006
• /
• 1989

로보트 매니퓰레이터가 컨베이어 상의 파트를 추적 하면서 작업을 수행하는 것은 작업 효율의 증가에 크게 기여한다. 본 논문은 컨베이어 상의 파트를 추적하기 위한 로보트 매니퓰레이터의 동작계획 알고리즘을 제안한다. 로보트 매니퓰레이터의 추적 동작은 밸트의 속도, 추적 시작 시간에서의 파트와 로보트 핸드의 위체이 의하여 결정된다. 이때 토크 및 관절 속도, 관절 가속도, 관절 저크의 제한범위가 모두 고려되며, 최소의 정착시간을 갖는 추적 궤적이 생성된다. 추적 해는 linearr quadratic tracking문제로 접근하여 구한다. 로보트매니퓰레이터의 동적 방정식은 파라메터의 함수 성능 지수를 최소화 하는 동적 방정식의 해는 동적 계획법에 의하여 구한다. ${\mu}-VAX_@$에 의한 시뮬레이션 결과를 제시한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.433-437
• /
• 1988

Direct measurement of the relative position between the end effector of robot and moving objects reduces difficulties caused by the joint encoder reading and transformation. For those purpose, the on-line sensing method using PSD sensor was developed in this paper. The sensor was calibrated on the precision table. Then, the relative position of a moving objects on the conveyor was measured while the robot was tracking the one.

• 한국통신학회논문지
• /
• 제15권11호
• /
• pp.945-954
• /
• 1990

로보트 팔이 컨베이어를 추적하는 강인한 적응제어계를 작업좌표에서 설계하였다. 제안한 설계방식은 모델규범형 설계방식과 Popov의 초안정정리를 기본으로 하였고 보조입력을 사용하여 Lyapunov 함수 V(t)와 시간미분 V와의 比의 크기를 크게하여 속응성을 좋게하여 과도특성을 개선하였다. 설계변수{lambda} 와 하중함수 $L_K$에서 $L_K$의 값이 {lambda}의 값보다 작은 경우에는 계통이 안정하나 $L_K$의 값이 {lambda}의 값보다 큰 경우에는 계통이 불안정하였다.

• International Journal of Control, Automation, and Systems
• /
• 제3권3호
• /
• pp.461-468
• /
• 2005

This paper proposes a wheel-assembly automation system, which assembles a wheel into a hub of a vehicle hung to a moving hanger in a car manufacturing line. A macro-micro manipulator control strategy is introduced to increase the system bandwidth and tracking accuracy to ensure insertion tolerance. A camera is equipped at the newly designed wheel gripper, which is attached at the center of the end-effector of the macro-micro manipulator and is used to measure position error of the hub of the vehicle in real time. The redundancy problem in the macro-micro manipulator is solved without complicated calculation by assigning proper functions to each part so that the macro part tracks the velocity error while the micro part regulates the fine position error. Experimental results indicate that tracking error satisfies the insertion tolerance of assembly $({\pm}1mm)$, and thus it is verified that the proposed system can be applied to the wheel assembly task on a moving hanger in the manufacturing line.

• 제어로봇시스템학회지
• /
• 제2권3호
• /
• pp.81-91
• /
• 1996

이 글에서는 Multi-Tasking Real Time O.S인 VxWorks를 기본으로 하여 다중센서 융합(Multi-Sensor Fusion) 능력을 갖는 다중 로봇 협조제어 시스템의 구현에 대하여 살펴보았다. 본 제어 시스템은 두대 로봇의 제어에 필요한 장애물 회피, 조건 동작(Conditional Motion) 혹은 동시동작(Concurrent Motion)과 외부 디바이스와의 동기 Motion(Conveyor Tracking)을 수행할 수 있게 구현하였고, 몇몇 작업을 통해 우수성을 입증하였다. 앞으로 본 연구와 관련한 추후 과제로는 1) 자유도가 6관절형인 수직다관절 매니퓰레이터를 위한 충돌회피 알고리즘의 개발, 2) Two Arm Robot의 상대 위치를 위한 Auto-Calibration 시스템의 개발, 3) CAD Based Trajectory 생성 등이 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.211-215
• /
• 1989

This paper describes a dynamic robotic assembly system in which an industrial robot executes peg-in-hole task in a moving state. As an effective means to synchronize the end-effector of the robot with the moving conveyor this work uses a control algorithm which is essentially a PID position control scheme combined with velocity feedforward loop. A RCC wrist is used for the inserting task and its force responses are investigated for various tracking conditions and inserting velocities through a series of experiments.