• 제목/요약/키워드: Conveyor system

검색결과 239건 처리시간 0.023초

차량용 배터리를 이용한 컨베이어 구동용 인버터 개발 (Development of Conveyor Drived Inverter Using Car Battery)

  • 민완기;김남오;김병철;전형석;김형곤;신석두;양인수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 학술대회 논문집 전문대학교육위원
    • /
    • pp.58-61
    • /
    • 2004
  • A novel single-phase induction machine drive containing full bridge inverter is presented. The drive is intended for conveyor system or a similar type of application requiring variable-speed operation with a fan-type load characteristic. An experimental drive based on the proposed setup has been built to verify its practical viability. The paper presents the results obtained from an investigation and discusses the properties and characteristics of the drive for the entire speed range from 0 to 60Hz.

  • PDF

Redesign and Evaluation of a Chickpea Harvester

  • Golpira, H.
    • Journal of Biosystems Engineering
    • /
    • 제40권2호
    • /
    • pp.102-109
    • /
    • 2015
  • Purpose: Slow manual harvesting of rain-fed chickpeas cultivated in fallow fields in developing countries have encouraged the design of a mechanical harvester. Methods: A tractor-pulled harvester was built, in which a modified stripper header detached pods from an anchored plant and a chain conveyor transferred material. The stripper harvester was redesigned to use: 1) the maneuverability of tractor-mounted frames, 2) the adaptability of floating headers, and 3) the flexibility of pneumatic conveyors. Results: A mobile vacuum conveyor, which was an innovator open system, was designed for the dilute phase transferring mode for both grain and material other than grain. A centrifugal fan transferred harvested material to a cyclone separator that settled harvested material in a grain tank 1 m high. The machine at the spot work rate of $0.42ha{\cdot}h^{-1}$ harvested chickpea pods equal to the output of 16.6 farm laborers. Conclusion: The low cost and reasonable projected purchase price are the advantages of the concept. Additionally, the shattering loss reduction confirms the feasibility of the prototype chickpea harvester for commercialization.

A-마트 상온 제품 종합물류센터 실시설계를 위한 시뮬레이션 (A Simulation Study for Detailed Design of A-Mart Logistics Center for General Products)

  • 전병학;장성용
    • 산업공학
    • /
    • 제20권1호
    • /
    • pp.21-32
    • /
    • 2007
  • This paper deals with the simulation model for A-Mart logistic center design and operations. In developed simulation model, receiving docks, conveyor sorter, conveyor system, shipping docks, material handling devices and manual sorting stations are considered. Three types of cargo such as transfer center cargo, distribution center cargo and supermarket cargo are considered. The simulation model and process animation are developed using the simulation package ARENA. Among various design and operation alternatives consisting of the number of workers of receiving dock, allocation of receiving docks by cargo types, conveyor sorter velocity, the number of folk-lift, the number of manual sorting operators and overall layout, the best alternatives of each subsystem are selected by simulation analysis. The major performance measures such as sorter throughput, utilization of operators at each station, receiving docks utilization and folk-lift utilization are considered for the alternative evaluation.

Non-linear vibration and stability analysis of a partially supported conveyor belt by a distributed viscoelastic foundation

  • Ghayesh, M.H.;Khadem, S.E.
    • Structural Engineering and Mechanics
    • /
    • 제27권1호
    • /
    • pp.17-32
    • /
    • 2007
  • The main source of transverse vibration of a conveyor belt is frictional contact between pulley and belt. Also, environmental characteristics such as natural dampers and springs affect natural frequencies, stability and bifurcation points of system. These phenomena can be modeled by a small velocity fluctuation about mean velocity. Also, viscoelastic foundation can be modeled as the dampers and springs with continuous characteristics. In this study, non-linear vibration of a conveyor belt supported partially by a distributed viscoelastic foundation is investigated. Perturbation method is applied to obtain a closed form analytic solutions. Finally, numerical simulations are presented to show stiffness, damping coefficient, foundation length, non-linearity and mean velocity effects on location of bifurcation points, natural frequencies and stability of solutions.

횡방향자속 선형동기전동기의 특성해석 (Characteristics Analysis of Transverse Flux Linear Synchronous Motor)

  • 윤선기;조윤현
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
    • /
    • pp.43-45
    • /
    • 1999
  • This paper is presented about the development of magnetic levitation conveyor with a transverse flux linear synchronous motor (TFLSM). The TFLSM is proposed as the new type linear motor for the conveyor driving system. The flux density distribution. the thrust and etc. of TFLSM are analyzed by the finite element method. To analyze the dynamic characteristics of TFLSM, the parameter of equivalent circuit is calculated by the analytical method.

  • PDF

장거리 벨트 컨베이어의 기동 및 정지시의 동적거동 해석 (Dynamic Analyis of Long Distance Belt Conveyor During Starting and Stopping)

  • 김원진;박태건;이신섭
    • 대한기계학회논문집A
    • /
    • 제20권2호
    • /
    • pp.585-593
    • /
    • 1996
  • According to the considerable increase of the length of belt conveyors, the dynamic analysis of systme becomes necessary to consider the variation of tensions and transient motion of components during starting and stopping of conveyor. The mathematical model of system is derived using the lumped parameter method. The input driving force is represented with two functions of time and pulley speed to count the characteristics of motor and fluid coupling. An example system was studied with 14 km in the distance of carrying. At head, it has two drivers and one gravity take-up and at tail ond driver and one power winch take-up. In the example, the transient tensions and responses, calculated using two cases of driving force, are mutually compared in starting mode. Also, the position of maximum tension and the braking force of take-up are obtained in stopping mode.

클린룸 내 롤러 컨베이어 운송장치 주위의 유동해석 (Flow Analysis around the Roller Conveyor in a Clean Room)

  • 전현주;박찬우;임익태
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2009년도 하계학술발표대회 논문집
    • /
    • pp.1507-1512
    • /
    • 2009
  • Flow field in a roller conveyor system, induced from the movement of a cassette in which glasses for flat panel display are loaded, is numerically studied in this paper. Contamination on the glass surface by dust particles produced from mechanical friction between roller and cassette is predicted from the analysis results of flow fields. Results show that a large swirl flow is formed under the moving cassette with constant speed. This swirl flow is confined only under the cassette because two main streams from the backward and the fan filter unit on the top ceiling are sufficiently strong. Therefore, it can be said that possibility of the contamination by the particles originated from the friction is relatively low. It is also revealed that flow direction between glass plates is changed according to the speed of the cassette movement due to the shear force of glass plates.

  • PDF

머신비전을 이용한 전복 치패 계수에 관한 연구 (A Study on Abalone Young Shells Counting System using Machine Vision)

  • 박경민;안병원;박영산;배철오
    • 해양환경안전학회지
    • /
    • 제23권4호
    • /
    • pp.415-420
    • /
    • 2017
  • 본 논문에서는 머신비전을 이용하여 컨베이어 시스템에서 이동하는 객체를 계수하는 알고리즘을 제안하였다. 영상처리를 이용한 객체 계수 시스템은 유동인구나 교통량 파악 등의 다양한 산업현장에서 사용되고 있으며, 주로 템플릿 매칭이나 기계학습의 방법으로 검출하여 추적 후 계수한다. 하지만 빠르게 움직이는 컨베이어 벨트위의 물체를 검출하기 위해서는 연산에 소요되는 시간이 짧아야 하므로 영역기반의 방법으로 영상처리를 하였다. 본 연구에서는 모양과 크기, 그리고 색깔이 비슷한 전복 치패를 계수하였다. 컨베이어 시스템은 한 방향으로 동작하는 특성을 이용하여 첫 번째 영역에서 치패를 검출하여 정보를 얻은 것을 기반으로 다음 프레임에서의 물체의 위치 범위를 계속적으로 변화하여 치패를 검출하고 각각의 획득한 정보를 비교하여 계수하였다. 치패가 간격을 두고 이동 시에는 정확하게 계수됨을 확인하였으며, 치패가 붙어서 오는 경우에는 크기정보를 이용하여 계수하여 중복되거나 누락됨을 방지하였다. 본 논문에서 제안한 알고리즘은 컨베이어 시스템 위에서 움직이는 다양한 객체 계수 제어에 적용할 수 있을 것이다.

비전시스템을 이용한 이동물체 자동검사에 관한 연구 (A Study on Automatic Inspection Algorithm for Moving Object using by Vision System)

  • 조영석
    • 디지털산업정보학회논문지
    • /
    • 제5권1호
    • /
    • pp.99-105
    • /
    • 2009
  • Recently the research is much interested in about the inspection system using by computer vision system. In this paper, we deal with shape inspection technique for moving to be long and narrow object on conveyor belt. first, we are acquired for moving object on conveyor belt. then the object segmentation is using by color information for background and object. the object position be calculated by horizontal and a vertical histogram. second, we are checked for two hole in front part, widths and top/bottom side information in middle part, and finally checking for two holes in rear part. The performance of our proposed model is evaluated by experiments, within error of 1㎜, and can be checking to 17 object /min.

물류 시스템 적용 유도전동기의 전압강하와 역률 보상 관계 (Voltage Drop and Power Factor Compensation Relation of Induction Motor applied to Logistics System)

  • 김종겸
    • 전기학회논문지P
    • /
    • 제67권3호
    • /
    • pp.155-159
    • /
    • 2018
  • Recently, the expansion or establishment of facilities for the logistics system is increasing. Conveyor facilities play a major role in sorting and transporting logistics. Induction motors are widely used for the operation of these conveyor systems. In the logistics system, a large number of induction motors are used. These motors have a considerable distance from the power source side and have a low power factor. The installation position for the power factor compensation of the induction motor is very important. Since the voltage drop depends on the length of the line, it is an important parameter in capacitor capacity determination for power factor compensation. The capacity of the capacitors installed to compensate the power factor of the inductive load should be designed to the extent that self-excitation does not occur. In this study, we analyze the method of compensating the proper power factor considering the voltage drop and the installation position of the induction motor in the logistics system.