• 반도체디스플레이기술학회지
• /
• 제8권4호
• /
• pp.71-76
• /
• 2009

The clean non-contact type conveyor system for vertical transfer of large size FPD(Flat Panel Display) glasses has been installed at FPD production line just since a few years ago. The most important part of the conveyor is the 3 axis permanent magnet rollers faced orthogonally in pairs. However, the systematic design method about it has not been proposed yet. In this paper, we studied a design analysis for determining geometrical parameters of the magnetic roller by using a commercial FEM tool of the 3D Maxwell. Through a series of simulation, we obtained the relationship of several geometrical parameters affecting the torque of the conveyor.

• 대한산업공학회지
• /
• 제41권2호
• /
• pp.209-219
• /
• 2015

This paper deals with a case study about productivity improvement in medium and small-sized manufacturing factories. It is popular to improve the productivity of lines by shortening the production cycles and assigning multi jobs to workers. We analyze the production lines and improve the productivity in the case study through multi-functional workers and shortened production lines. Based on the case study, we propose some guidelines to improve the productivity of production lines.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.314-324
• /
• 1996

A high speed NMR quality evaluation sensor was designed , constructed and tested . The device consists of an NMR spectrometer coupled to a conveyor system. The conveyor was run at speeds ranging from 0 to 250 mm/s. Spectral of avocado fruits and one-dimensional magnetic resonance images of pickled olives were acquired while the samples were moving on a conveyor belt mounted through a 20Tesla NMR magnet with a 20 mm diameter surface coil and a 150 mm diameter imaging coil respectively. Fro a magnetic resonance spectrum analysis, motion through variations in the magnetic field tends to narrow spectral line width just like using sample rotation in high resolution NMR to narrow spectral line width. Spectrum analysis was used to detect the dry weight of avocado fruits using the ratio oil and water resonance peaks. Good correlations maximum r=0.970@ 50 mm/s and minimum r=0.894@250mm/s ) between oil and water resonance peak ratio and dry weight of avocados were observed at speeds ra ging from0 to 250mm/s. For the application of magnetic resonance imaging (MRI) method, the projections were used to distinguish between pitted and non-pitted olives . Effect of fruit position in the coil was tested and coil degree effects were noticed when projects were generated under dynamic conditions. Various belt speeds (up to 250mm/s) were tested and detection results were compared to static measurements. Higher classification errors were occurred at dynamic conditions compared to errors while olives were at rest.

• 산업경영시스템학회지
• /
• 제36권3호
• /
• pp.95-108
• /
• 2013

The problem of constrained sequencing of a set of jobs on a conveyor system with the objective of minimizing setup cost is investigated in this paper. A setup cost is associated with extra material, labor, or energy required due to the change of attributes in consecutive jobs at processing stations. A finite set of attributes is considered in this research. Sequencing is constrained by the availability of conveyor junctions. The problem is motivated by the paint purge reduction problem at a major U.S. automotive manufacturer. We first model a diverging junction with a sequence-independent setup cost and predefined attributes as an assignment problem and this model is then extended for a more general situation by relaxing the initial assumptions in various ways.

• 한국정보처리학회논문지
• /
• 제6권2호
• /
• pp.377-384
• /
• 1999

본 연구에서는 클라이언트/서버 형태로 승용차 조립라인을 시뮬레이션한 컨베이어 시스템을 원격으로 영상을 감시하고 제어하는 시스템을 설계하고 구현하였다. 웹 애플릿을 기반으로 구현된 클라이언트 시스템은 상황실에 위치하여 컨베이어 현장을 영상 감시하고 직접적으로 제어를 담당하는 서버에게 컨베이어 제어 명령을 내린다. 또한 서버시스템 역시자바 프로그램밍 언어를 사용하여 웹 애플릿을 기반으로 구현되었으며, 컨베이어 시스템을 통과하는 생산품 내역에 대한 분산 데이터베이스 시스템을 유지 관리한다.

• 한국기계가공학회지
• /
• 제12권6호
• /
• pp.175-181
• /
• 2013

The primary element of machining automation is to maximize the utilization of machine tools, which determines the output and lead-time. In particular, 95% of raw materials for wing ribs are cut into chips and 0.6 ton of chips are generated every hour from each machine tool. In order to verify the chip recycling system that controls the chips from the machines in five-axis FMS line, a simulation of the virtual model is constructed using the QUEST simulation program. The optimum speed of the chip conveyor and its operating conditions that directly affect the efficiency of the FMS line are presented including the chip conveyor speed, the maximum capacity of the hopper, and the number of chip compressors.

• 정보처리학회논문지B
• /
• 제10B권3호
• /
• pp.305-310
• /
• 2003

본 논문은 자동으로 볼트를 고속 정밀 검사할 수 있는 장치에 대한 시스템 설계 및 제품 개발에 관해 다룬다. 볼트를 연속적으로 고속 검사하기 위해 컨베이어를 이용하고 이를 동작시키기 위한 서보모터와 엔코더를 부착하여 정확한 이송량를 유지하게 된다. 엔코더 신호를 수신한 라인스캔 카메라의 동작에 따라 프레임 그래버로 볼트 영상을 전송하며 한 프레임을 구성한 후 영상 검사 알고리즘에 의해 파라메터를 측정하고 검사하게 된다. 제작된 결과물을 이용하여 실험을 통해 본 장치의 효용성을 입증하고자 한다.

• 산업공학
• /
• 제16권2호
• /
• pp.229-239
• /
• 2003

The On-Line Analytical Processing (OLAP) tools access data from the data warehouse for complex data analysis, such as multidimensional data analysis, and decision support activities. Current research has lead to new developments in all aspects of data warehousing, however, there are still a number of problems that need to be solved for making data warehousing effective. View maintenance, one of them, is to maintain view in response to updates in source data. Keeping the view consistent with updates to the base relations, however, can be expensive, since it may involve querying external sources where the base relations reside. In order to reduce maintenance costs, it is possible to maintain the views using information that is strictly local to the data warehouse. This process is usually referred to as "self-maintenance of views". A number of algorithm have been proposed for self maintenance of views where they keep some additional information in data warehouse in the form of auxiliary views. But those algorithms did not consider a consistency of materialized views using view self-maintenance. The purpose of this paper is to research consistency problem when self-maintenance of views is implemented. The proposed "conveyor algorithm" will resolved a complete consistency of materialized view using self-maintenance with considering network delay. The rationale for conveyor algorithm and performance characteristics are described in detail.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.433-437
• /
• 1988

Direct measurement of the relative position between the end effector of robot and moving objects reduces difficulties caused by the joint encoder reading and transformation. For those purpose, the on-line sensing method using PSD sensor was developed in this paper. The sensor was calibrated on the precision table. Then, the relative position of a moving objects on the conveyor was measured while the robot was tracking the one.

• 산업경영시스템학회지
• /
• 제1권1호
• /
• pp.37-44
• /
• 1978

The purpose of this study is to search for an efficient application method in solving delay-phenomenon problems which influence upon total production cost through case study. The method of this study is an experimental study based on cutting time data in lead cutting operations from "Lead Cutting Machine (Stripper)" and its service rate data from a large electronic products company which utilizes conveyor line system for the products "Car Stereo" The procedure of this experimental study is as follows; 1) Using loading(Man-Hour) analysis technique j,1 order to analyse and evaluate Production capacity, efficiency, operation and idle rate assembly charge, waiting and service cost -when its are controlled by stripper operator(server) 2) Establishing adequate waiting time model of finite population caused by the interference of 4 stripper machine which is drawn from mathematical statistics testing, that is, goodness of fit test in the waiting and service rate and to search for optimal solution by utilizing the above mentioned model The experimental result was that amount to 8,546,618won Per year was brought down, that is, by optimum point, it shows a decrease as compared with Present point. The major limitation of this experimental study is that the Queue in the Finite Population, so to speak. it comes from the interference of 4 stripper machine dealt with this case were limited only on the Car Stereo conveyor line. Further study of application of this application method to the areas such as material handling, personnel management marketing and transportation management is strong1y recommended.trong1y recommended.