• 대한기계학회논문집B
• /
• 제26권11호
• /
• pp.1513-1520
• /
• 2002

Effect of Convex Surface Curvature on the Onset of Nucleate Boiling of Subcooled Fluid Flow in Vertical Concentric Annuli An experimental study has been carried out to investigate the effect of the transverse convex surface curvature of core tubes on heat transfer in concentric annular tubes. Water is used as the working fluid. Three annuli having a different radius of the inner cores, Ri=3.18mm, 6.35mm, and 12.70mm with a fixed ratio of Ri/Ro=0.5 are used over a range of the Reynolds number between about 40,000 and 80,000. The inner cores are made of smooth stainless steel tubes and heated electrically to provide constant heat fluxes throughout the whole length of each test section. Experimental result shows that heat flux values on the onset of nucleate boiling of the smaller inner diameter model is much higher than that of the larger size test model.

• 대한기계학회논문집
• /
• 제16권2호
• /
• pp.302-312
• /
• 1992

Three dimensional velocity measurements of a 35.deg. inclined jet issuing into turbulent boundary layer on both concave and convex surfaces have been conducted. To investigate solely the effect of each curvature on the flow field, streamwise pressure variations are minimized by adjusting the shape of the opposite wall in the curved region. From the measured velocity components, streamwise mean vorticities are calculated to determine jet-crossflow interface. The results on convex surface show that the injected jet is separated from the wall and the bound vortex maintains its structure far downstream. On concave surface, the secondary flow in the jet cross-sections are enhanced and in some downstream region from the jet exit, the flow on the concave surface has been developed to Taylor-Gortler vortices

• 대한기계학회논문집
• /
• 제19권3호
• /
• pp.834-845
• /
• 1995

An experimental study is made in a nearly two-dimensional 90.deg. curved duct to investigate the effects of interaction between streamline curvature and mean strain on turbulence. The initial shear at the entrance to the curved duct is varied by an upstream shear generator to produce five different shear conditions ; a uniform flow (UF), a positive weak shear (PW), a positive strong shear(PS), a negative weak shear (NW) and a negative strong shear(NS). With the mean field data of the case UF, variations of the momentum thickness, the shape factor and the skin friction over the convex(inner) surface and the concave (outer) surface are scrutinized quantitatively in-depth. It is found that, while the pressure loss due to curvature is insensitive to the inlet shear rates, the distributions of wall static pressure along both convex and concave surfaces are much influenced by the inlet shear rates.

• 대한수학회지
• /
• 제49권3호
• /
• pp.585-604
• /
• 2012

In this paper we consider the evolution of the rolling stone with a rotationally symmetric nonconvex compact initial surface ${\Sigma}_0$ under the Gauss curvature flow. Let $X:S^n{\times}[0,\;{\infty}){\rightarrow}\mathbb{R}^{n+1}$ be the embeddings of the sphere in $\mathbb{R}^{n+1}$ such that $\Sigma(t)=X(S^n,t)$ is the surface at time t and ${\Sigma}(0)={\Sigma}_0$. As a consequence the parabolic equation describing the motion of the hypersurface becomes degenerate on the interface separating the nonconvex part from the strictly convex side, since one of the curvature will be zero on the interface. By expressing the strictly convex part of the surface near the interface as a graph of a function $z=f(r,t)$ and the non-convex part of the surface near the interface as a graph of a function $z={\varphi}(r)$, we show that if at time $t=0$, $g=\frac{1}{n}f^{n-1}_{r}$ vanishes linearly at the interface, the $g(r,t)$ will become smooth up to the interface for long time before focusing.

• Nuclear Engineering and Technology
• /
• 제26권3호
• /
• pp.440-452
• /
• 1994

핵연료 다발의 설계는 핵연료 표면에서의 열속이 임계열속에 도달되지 않도록 이루어져야한다. 이를 위해서는 설계된 핵연료 다발에 대한 임계열속이 정화하고 신뢰성 있게 평가되는 것이 매우 중요하다. 그러나 현재 사용되고 있는 임계열속 상관식에 관한 쟁점 대상중의 하나는 원통튜브관에서 실험적으로 얻어진 임계열속 자료가 유효직경 형태의 변수와 적당한 보정인자를 사용하여 핵연료다발 부수로 분석에 사용되고 있다는 것인데, 이러한 방법은 임계열속 예측에 있어서 불확실도 요인으로 작용하고 있다. 유효직경은 유동단면적상의 국부적 유체 특성을 제대로 표현하지 못 할 뿐만 아니라 표면구배효과 등을 고려할 수 없다. 더구나 난류유동은 오목구배면에서 보다는 볼록구배면에서 더욱 두드러진다. 즉, 횡방향 볼록구배면이 오목구배면 보다 유동의 반경방향으로의 난류 형성에 영향이 훨씬 크게 나타나는데, 이는 정화한 핵연료 임계열속 평가에 있어서 볼록구배의 영향이 반드시 고려되어야 함을 암시하는 것이다. 본 논문에서는 횡방향 구배의 유동영향에 대하여 전반적으로 심도있게 고찰하고 임계열속에 대한 영향이 논의 되었으며, 이 영향을 정량화하기 위하여 고려되어야 할 유동 모델과 향후 연구 방향이 제시되었다.

• 대한기계학회논문집B
• /
• 제22권3호
• /
• pp.373-385
• /
• 1998

The local Nusselt numbers have been measured for a round turbulent jet impinging on the convex surface with and without rib. Liquid crystal/transient method was used to determine the Nusselt number distributions along the surface. The temperature on the surface was measured to within .+-.0.25 deg. C accuracy using liquid crystal and a digital color image processing system. The experiments were made for the jet Reynolds number (Re) 23,000, the dimensionless nozzle-to-surface distance (L/d) from 6 to 10, the dimensionless surface curvature (d/D) 0.056, and the various rib types (height(d$_{1}$) from 1 to 2 mm, pitch (p) from 6 to 32 mm). It was found that the average Nusselt numbers on the convex surface with rib are higher than those without rib, mainly due to an increase in the turbulent intensity caused by flow separation, recirculation and reattachment on the wall surface. In addition, we compared the results by the steady-state method using the gold-film Intrex with those by the transient method.

• 한국통신학회논문지
• /
• 제14권2호
• /
• pp.121-136
• /
• 1989

圓筒形 物體의 오목면과 블록면의 表面에 密着하여 設置한 마이크로스트립 어레이 안테나의 輻射 特性에 관하여 理論的 解析을 試圖하였으며, 實驗을 통하여 檢證하였다. 單一素子 안테나의 解析은 傳送線路 모델法을 適用하였고, 어레이 안테나의 理論은 曲面 위에 2次元的으로 配列된 각각의 單一素子에 대하여 座標移動과 回轉을 考慮한 座標變換法으로 解析하여 遠距離에서의 合成 電界 强度를 數値計算으로 구하였으며, 10GHz에서 4素子 竝列 어레이 안테나 및 마이크로스트립 給電線路를 設計 製作하여 여러 가지 曲率半徑에 대하여 反射損失, 共振周波數, 輻射패턴, 半 電力 비임幅, 利得 등과 같은 諸 輻射特性을 測定하겨 理論値와 比較 考察하였다. 理論에서 豫測한 바와 같이 오목면과 블록면에서 모두 曲率半徑의 減少에 따라 輻射 패턴의 비임 폭이 더 커지는 것을 確認하였으며, 曲面에서 座標變換法으로 計算한 마이크로스트립 竝列 어레이 안테나의 合成 輻射電力 패턴이 測定値와 잘 一致하였다. 아울러 曲率半徑의 變化에 따른 周波數의 變化, 入力 임피던스 및 利得의 變化는 無視할 수 있을 程度임을 確認하였다.

• Journal of Mechanical Science and Technology
• /
• 제16권9호
• /
• pp.1121-1136
• /
• 2002

The flow characteristics of film coolant issuing into turbulent boundary layer developing on a convex surface have been investigated by means of flow visualization and three-dimensional velocity measurement. The Schlieren optical system with a spark light source was adopted to visualize the jet trajectory injected at 35° and 90° inclination angles. A five-hole directional pressure probe was used to measure three-dimensional mean velocity components at the injection angle of 35°. Flow visualization shows that at the 90° injection, the jet flow is greatly changed near the jet exit due to strong interaction with the crossflow. On the other hand, the balance between radial pressure gradient and centrifugal force plays an important role to govern the jet flow at the 35° injection. The velocity measurement shows that at a velocity ratio of 0.5, the curvature stabilizes downstream flow, which results in weakening of the bound vortex structure. However, the injectant flow is separated from the convex wall gradually, and the bound vortex maintains its structure far downstream at a velocity ratio of 1.98 with two pairs of counter rotating vortices.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.373-378
• /
• 2000

An experimental investigation on the incipience of nucleate boiling in forced flow of water is performed as a verification and extension of previous analysis. The effects of the subcooling, Reynolds number and surface curvature on the onset of nucleate boiling(ONB) in a concentric annulus flow channel with smooth inner heating surface is investigated experimentaly. Through flow visualization, the boiling phenomenon was observed directly and the experimental results were examined to find ONB heat flux. The results show that the variation of heat flux at ONB is increased linearly as the Reynolds number and subcooling are increased. The effect of surface curvature is very great specially for a small radius when radius of the inner heating tube is increased, the heat flux at ONB is almost inversely increased for the range of this investigation. It is found that the effect of convex surface curvature on ONB heat flux is very significant for a small radius.

• 한국수학사학회지
• /
• 제20권4호
• /
• pp.49-60
• /
• 2007

본 논문에서는 초등기하에 나오는 도형의 합동의 개념으로부터 자연스럽게 얻어지는 3차원 유클리드 공간에 있는 매끄러운 곡면의 강성의 개념을 소개하고 컴팩트 곡면의 강성이론의 발전과정과 그 일반화를 살펴본다.