• International Journal of Naval Architecture and Ocean Engineering
• /
• v.2 no.2
• /
• pp.104-111
• /
• 2010

The complete avoidance of cavitation, as a result of gap flow between the fixed and movable portion of a horn type rudder system, is difficult. To reduce gap flow, it is a common practice to attach a half round prismatic bar that protrudes beyond the concave surface of the horn facing the gap and laid along the centerplane of the rudder. However the employment of such a device does not always yield satisfactory results. Previously, the authors have shown that a pair of blocking bars, attached on the convex surface of the movable portion, better enhance the blocking ability of gap flow to that of a single centre bar installed on the concave surface. This also circumvents difficulties that might occur in practical applications. In the present study, a series of numerical computations show that flow injected into the gap of a rudder may also block the flow within, without employment of any physical devices, such as a half circular bar. This study also shows that the combination of flow injection and blocking bars may result in the synergic augmentation of blocking efficiency of gap flow, as demonstrated in computations for a three dimensional rudder system.

• Geomechanics and Engineering
• /
• v.9 no.6
• /
• pp.815-827
• /
• 2015

The mechanical behavior of soil and soil-rock mixture is investigated via the discrete element method. A non-overlapping combination method of spheres is used to model convex polyhedron rock blocks of soil-rock mixture in the DEM simulations. The meso-mechanical parameters of soil and soil-rock interface in DEM simulations are obtained from the in-situ tests. Based on the Voronoi cell, a method representing volumtric strain of the sample at the particle scale is proposed. The numerical results indicate that the particle rotation, occlusion, dilatation and self-organizing force chains are a remarkable phenomena of the localization band for the soil and soil-rock mixture samples. The localization band in a soil-rock mixture is wider than that in the soil sample. The current research shows that the 3D discrete element method can effectively simulate the mechanical behavior of soil and soil-rock mixture.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.1
• /
• pp.94-105
• /
• 2021

This study analyzes the shape change of the breast according to the replica combination method of the lower cup and suggest a pattern construction for the end use purpose. To provide appropriate brassiere patterns to each individual who has various 3D shape characteristics, the ways of layout of 3D replicas were investigated as well as evaluated subjectively and objectively. As for experimental brassieres, basic replicas from the mold cup of long-run brassiere were combined into five different ways to find the appropriate lower brassiere cup pattern. Eighteen women wore experimental brassieres and their breasts were analyzed using the Geomagic Design X program (3D System, Inc., Korea). As result, the pattern that matched the vertexes of the four pieces of the replica and naturally spread the bottom part was best for raising and pushing toward the inside breasts. The fit was good in the case of a pattern in which the convex portions overlapped both sides of the four replica pieces where the vertexes and the bottom part naturally spread apart. The subjects were able to differentiate comfortably fitted brassieres and highly functional brassieres.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.1
• /
• pp.89-98
• /
• 2016

In this paper, we proposed an automated areal feature matching method based on geometric similarity without user intervention and is applied into areal features of many-to-many relation, for confusion of spatial data-sets of different scale and updating cycle. Firstly, areal feature(node) that a value of inclusion function is more than 0.4 was connected as an edge in adjacency matrix and candidate corresponding areal features included many-to-many relation was identified by multiplication of adjacency matrix. For geometrical matching, these multiple candidates corresponding areal features were transformed into an aggregated polygon as a convex hull generated by a curve-fitting algorithm. Secondly, we defined matching criteria to measure geometrical quality, and these criteria were changed into normalized values, similarity, by similarity function. Next, shape similarity is defined as a weighted linear combination of these similarities and weights which are calculated by Criteria Importance Through Intercriteria Correlation(CRITIC) method. Finally, in training data, we identified Equal Error Rate(EER) which is trade-off value in a plot of precision versus recall for all threshold values(PR curve) as a threshold and decided if these candidate pairs are corresponding pairs or not. To the result of applying the proposed method in a digital topographic map and a base map of address system(KAIS), we confirmed that some many-to-many areal features were mis-detected in visual evaluation and precision, recall and F-Measure was highly 0.951, 0.906, 0.928, respectively in statistical evaluation. These means that accuracy of the automated matching between different spatial data-sets by the proposed method is highly. However, we should do a research on an inclusion function and a detail matching criterion to exactly quantify many-to-many areal features in future.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.437-438
• /
• 2006

Generally, the vertical roll process is used to achieve extensive width reduction in hot strip mill. However, it is difficult to avoid the defects such as dog-bone and seam-defect. The sizing press has been developed in response to the defects mentioned above. Especially, this study is carried out to investigate the deformation of slab by two-step sizing press. The deformation behavior in the width sizing process is more favorable than that in conventional vertical rolling edger. The objective of this study is to determine the optimal anvil shape parameters in the sizing press with two-step die from the viewpoint of edge-seam length. In general, the edge-seam defect occurs parallel to the rolling direction at both edges in horizontal rolling process after sizing press. The optimal combination of the parameters is determined by FE-simulation and Artificial Neural Network (ANN). The slab deformation in sizing press with convex anvil is analyzed by FE-simulation. The most suitable profile of the anvil is also discussed fur the improvement of trimming loss because of the side seam defect by FE-simulation and ANN.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2761-2768
• /
• 2010

In this paper, we studied the use of the foreground and background features and SVM classifier to improve the accuracy of offline handwritten numeral recognition. The foreground features are two directional features: directional gradient feature by Kirsch operators and directional stroke feature by projection runlength, and the background feature is concavity feature which is extracted from the convex hull of the numeral, where concavity feature functions as complement to the directional features. During classification of the numeral, these three features are combined to obtain good discrimination power. The efficiency of our feature sets was tested by recognition experiments on the handwritten numeral database CENPARMI, where we used SVM with RBF kernel as a classifier. The experimental results showed that each combination of two or three features gave a better performance than a single feature. This means that each single feature works with a different discriminating power and cooperates with other features to enhance the recognition accuracy. By using the composite feature of the three features, we achieved a recognition rate of 98.90%.

• The Korean Journal of Applied Statistics
• /
• v.34 no.6
• /
• pp.863-874
• /
• 2021

In this paper, we propose a post-selection inference procedure for the fused lasso signal approximator (FLSA). The FLSA finds underlying sparse piecewise constant mean structure by applying total variation (TV) semi-norm as a penalty term. However, it is widely known that this convex relaxation can cause asymptotic inconsistency in change points detection. As a result, there can remain false change points even though we try to find the best subset of change points via a tuning procedure. To remove these false change points, we propose a post-selection inference for the FLSA. The proposed procedure applies a permutation test based on CUSUM statistic. Our post-selection inference procedure is an extension of the permutation test of Antoch and Hušková (2001) which deals with single change point problems, to multiple change points detection problems in combination with the FLSA. Numerical study results show that the proposed procedure is better than naïve z-tests and tests based on the limiting distribution of CUSUM statistics.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.4
• /
• pp.18-26
• /
• 2004

Timbers of 14 by 14 cm, 2.4 m long, were dried in a vacuum kiln to investigate vacuum drying characteristics using three types of heating methods, conduction heating with hot plate, the radio frequency (RF) heating and the combination of both (hybrid heating). Average drying rate is the highest for the hybrid heating and the lowest for the RF heating. Average specific energy is the highest for the RF heating and the lowest for conduction heating. Transverse moisture content distribution of dried timber revealed the convex profile for both conduction and the hybrid heating and moisture content increased from one face to the opposite face for the RF heating. Moisture content distribution along the length of timber increased from the end to the middle of timber length for conduction and the hybrid heating and decreased from the end to the middle of timber length for the RF heating. End- and surface checks for conduction heating were severer than the other heating methods. No internal check occurred in any heating methods. Drying characteristics of conduction heating showed in-between trend of the RF and the hybrid heating.

• Journal of Advanced Information Technology and Convergence
• /
• v.9 no.1
• /
• pp.25-37
• /
• 2019

Power-line communication (PLC) has influenced smart grid development. In addition, PLC has also been instrumental in current research on internet-of-things (IoT). Due to the implementation of PLC in smart grid and IoT environments, strides have been made in PLC and its combination with the wireless system to form a hybrid communication system. Also, PLC has evolved from a single-input-single-output (SISO) configuration to multiple-input-multiple-output (MIMO) configuration system, and from a point-to-point communication system to cooperative communication systems. In this work, we extend a MIMO wireless two-way amplify-and-forward (AF) cooperative communication system to a hybrid PLC and wireless (PLC/W) system configuration. We then maximize the weighted sum-rate for the hybrid PLC/W by optimizing the precoders at each node within the hybrid PLC/W system. The sum-rate problem was found to be non-convex, therefore, an iterative algorithm is used to find the optimal precoders that locally maximize the system sum-rate. For our simulation results, we compare our proposed hybrid PLC/W configuration to a PLC only and wireless only configuration at each node. Due to an improvement in system diversity, the hybrid PLC/W configuration outperformed the PLC only and wireless only system configurations in all simulation results presented in this paper.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.43 no.1
• /
• pp.70-78
• /
• 2016

Many types of orthopedic appliances have been developed and used for the treatment of class II malocclusion in pediatric dentistry. Headgear is one of the extraoral appliances, which is used for the purpose of preventing the overgrowth of maxilla. Hotz appliance is used in couple with a cervical headgear for the expansion of maxilla and retraction of maxillary incisors. This case report is about the orthodontic treatment of three patients with class II division I malocclusion. These young patients were given orthopedic treatment in combination with a cervical headgear and Hotz appliance. After the treatment using these extraoral and intraoral appliances, succeeding treatments were practiced considering individual needs as follows: fixed orthodontic appliance for mandibular anterior crowding, Class II activator for retention and additory orthopedic treatment and the retention with Hotz appliance. Young patients with Class II division I malocclusion reported in this study received the orthodontic treatment using a cervical headgear and Hotz appliance as well as appropriate succeeding treatment afterward. All patients received improved convex profiles and lip protrusions by retracting maxilla and maxillary incisors.