• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.323-324
• /
• 2006

This paper presents dynamics of register error on a compensator roll type converting machine. Though a register control is an important aspect of a converting machine, it has not been taken into account as a main subject. Lately, demands for high speed converting machines over 500mpm(m/min) are raising but domestic converting industries can not come up with the high speed machines because capacities fur designing of the converting machine is restricted lower than 300mpm. Moreover register control is the key to product flexible displays through roll-to-roll systems. In this paper, a compensator roll type register controller is analyzed using mathematical model of register error. A case study for reducing transient register errors is discussed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.65-66
• /
• 2006

Dancer systems are most widely used mechanism for attenuation of tension disturbances. Lately, demands fur high speed converting machines over 500mpm(m/min) are raising but domestic converting industries can not come up with the machines because capacities for a designing of the converting machine are restricted lower than 300mpm. Moreover roll-to-roll is attracted flexible display manufacturer's attention as a effective method for productivity. A constant tension level in the span before the first printing cylinder is the key of high speed quality printing. This paper presents a modeling and simulations of dancer systems on converting machines.

• 대한기계학회논문집A
• /
• 제33권5호
• /
• pp.482-488
• /
• 2009

Dancer system is typically used equipment for attenuation of tension disturbances. In industrial converting machines, a composite type of dancer system is applied which is mixture of active and passive dancer. It includes feedback position control loop of roll with pendulum dancer and its characteristics is different from passive and active one. In this paper, a mathematical model of the pendulum dancer was derived including PI position feedback controller and it was analyzed by using a pole-zero map and bode plot under various conditions. It was found out that velocity, length of span and inertia were associated with the performance of regulation. It was suggested that the length of upstream span should be greater than that of the downstream and the inertia should be smaller for improvement of the performance. The results can be used for design guidelines of the industrial dancer system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.325-326
• /
• 2006

Recently, it is concentrated on productivity improvement in high speed operation by converting industries. Register error is becoming the one of the most issued problem. Moreover register control is the key to product flexible displays through roll-to-roll systems. This paper presents a derivation of register error modeling. And the dynamics of register error is simulated under various conditions. Register error is affected by both roll velocity and tension between the front and back span. And dynamics of register error is to be an interaction in succeeding spans.

• 한국CDE학회논문집
• /
• 제14권5호
• /
• pp.291-296
• /
• 2009

This paper presents a post-processing algorithm for 5-axis machines with three rotary axes (3R-2L type). 5-axis machining needs the postprocessor for converting cutter location (CL) data to machine control (NC) data. The existing methods for post-processing use inverse kinematics equations from for-ward kinematics. However in case of 5-axis machines with three rotary axes, the inverse kinematics equations are not induced directly since the forward kinematics equations are non-linear. In order to get the joint values from the forward kinematics equations, previous algorithms use numerical method for the post-processing, which needs searching algorithms with computation time and may result in fail. This paper proposes a geometric method for the post-processing of 3 rotary type 5-axis machines. Our algorithm has three advantages: first, it does not need establishing forward kinematics equations. Second, it is reliable method that eliminates any numerical methods for the inverse kinematics, resulting in the exact solution. Finally, the proposed algorithm can also be applied to 2R-3L type of 5-axis machines.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.85-87
• /
• 1998

In the industrial field, the necessity for the linear motion is increasing. Because of the motion converting mechanism there exist many losses. So the application of linear machines instead of rotating machines is increasing. As compared with a mono-polar type linear DC motor, it is possible for a multi-polar type linear BC motor to have a longer stroke and more thrust with thin shape. However, there are thrust ripple on multi-polar type one. In this paper, a design to multi-polarize of the linear DC motor is discussed. In order to make a smoother thrust on multi-polar type linear BC motor. a method is proposed.

• 대한기계학회논문집B
• /
• 제29권7호
• /
• pp.814-819
• /
• 2005

The phase change heat transfer has been applied to the processes of machines as well as of manufacturing. The cycle in a heat exchanger includes the phase change phenomena of coolant for air conditioning, the solidification in casting process makes use of the characteristics of phase change of metal, and the welding also proceeds with melting and solidification. To predict the phase change processes, the experimental and numerical approaches are available. In the case of numerical analysis, the Enthalpy method is most widely applied to the phase change problem, comparing to the other numerical methods, i.e. the Equivalent Specific Heat method and the Temperature Recovery method. It's because that the Enthalpy method is accurate and straightforward. The Enthalpy method does not include any correction step while the correction of final temperature field is inevitable in the Equivalent Specific Heat method and the Temperature Recovery method. When the temperature field is to be used in the calculation, however, there must be converting process from enthalpy to temperature in the calculation scheme of Enthalpy method. In this study, an improved method for the Equivalent Specific Heat method is introduced whose method dose not include the correction steps and takes temperature as an independent variable so that the converting between enthalpy and temperature does not need any more. The improved method is applied to the solidification process of pure metal to see the differences of conventional and improved methods.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제14권6호
• /
• pp.567-581
• /
• 2008

웹의 크기가 폭발적으로 증가함에 따라 인터넷에서 정보를 얻는 수단으로서 검색 엔진의 중요성이 부각되고 있다. 검색 엔진은 사용자에게 최신의 정보를 검색 결과로서 제공하기 위해 웹 페이지를 주기적으로 수집하고 이를 데이타베이스에 저장한다. 웹 크롤러는 이러한 목적으로 웹 페이지를 수집하는 프로그램이다. 대부분의 검색 엔진은 제한된 시간 내에 많은 수의 웹 페이지를 수집하기 위해 다수의 머신을 사용하는 병렬 웹 크롤러를 이용한다. 그러나, 병렬 웹 크롤러의 아키텍처와 세부 구현 방법이 잘 알려져 있지 않기 때문에 실제로 병렬 웹 크롤러를 구현하는 데에 어려움이 많다. 본 논문에서는 병렬 웹 크롤러(parallel web crawler)의 아키텍처와 세부 구현 방법을 제시한다. 병렬 웹 크롤러는 다수의 머신에서 웹 페이지를 병렬적으로 수집하기 위해 조정자(coordinator) 대리자(agent) 구조의 2-티어(tier) 모델을 사용한다. 조정자/대리자 모델은 각 머신에서 웹 페이지를 수집하기 위한 다수의 대리자들과 이 대리자들을 관리하기 위한 하나의 조정자로 구성된다. 병렬 웹 크롤러는 웹 페이지를 수집하기 위한 크롤링(crawling) 모듈, 수집한 웹 페이지를 데이타베이스 로딩 포맷으로 변환하기 위한 컨버팅(converting) 모듈, 수집된 웹 페이지의 중요도를 계산하기 위한 랭킹(ranking) 모듈로 구성된다. 본 논문에서는 병렬 웹 크롤러의 각 모듈들을 설명하고, 세부 구현 방법을 설명한다. 마지막으로, 실험을 통해 병렬 웹 크롤러의 성능을 평가하였다. 실험 결과, 제안된 병렬, 웹 크롤러가 수집해야할 웹 페이지 개수와 머신 개수에 따라 확장 가능함을 보였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권2호
• /
• pp.962-977
• /
• 2019

The human voice is a convenient method of information transfer between different objects such as between men, men and machine, between machines. The development of information and communication technology, the voice has been able to transfer farther than before. The way to communicate, it is to convert the voice to another form, transmit it, and then reconvert it back to sound. In such a communication process, a vocoder is a method of converting and re-converting a voice and sound. The CELP (Code-Excited Linear Prediction) type vocoder, one of the voice codecs, is adapted as a standard codec since it provides high quality sound even though its transmission speed is relatively low. The EVRC (Enhanced Variable Rate CODEC) and QCELP (Qualcomm Code-Excited Linear Prediction), variable bit rate vocoders, are used for mobile phones in 3G environment. For the real-time implementation of a vocoder, the reduction of sound quality is a typical problem. To improve the sound quality, that is important to know the size and shape of noise. In the existing sound quality improvement method, the voice activated is detected or used, or statistical methods are used by the large mount of data. However, there is a disadvantage in that no noise can be detected, when there is a continuous signal or when a change in noise is large.This paper focused on finding a better way to decrease the reduction of sound quality in lower bit transmission environments. Based on simulation results, this study proposed a preprocessor application that estimates the SNR (Signal to Noise Ratio) using the spectral SNR estimation method. The SNR estimation method adopted the IMBE (Improved Multi-Band Excitation) instead of using the SNR, which is a continuous speech signal. Finally, this application improves the quality of the vocoder by enhancing sound quality adaptively.

• 펄프종이기술
• /
• 제32권5호
• /
• pp.72-79
• /
• 2000

On the other hand, the fiber orientation at the surface and middle layer of the sheet controls the bending stiffness of paperboard. Therefore, a reliable measurement of paper surface fiber orientation gives us a magnificent tool to investigate and predict paper curling and cockling tendency, and provides the necessary information to fine-tune the manufacturing process for optimum quality. Many papers, especially heavily calendered and coated grades, do resist liquid and gas penetration very much, being beyond the measurement range of the traditional instruments or resulting inconveniently long measuring time per sample. The increased surface hardness and use of filler minerals and mechanical pulp make a reliable, non-leaking sample contact to the measurement head a challenge of its own. Paper surface coating causes, as expected, a layer which has completely different permeability characteristics compared to the other layers of the sheet. The latest developments in sensor technologies have made it possible to reliably measure gas flow n well controlled conditions, allowing us to investigate the gas penetration of open structures, such as cigarette paper, tissue or sack paper, and in the low permeability range analyze even fully greaseproof papers, silicon papers, heavily coated papers and boards or even detect defects in barrier coatings! Even nitrogen or helium may be used as the gas, giving us completely new possibilities to rank the products or to find correlation to critical process or converting parameters. All the modern paper machines include many on-line measuring instruments which are used to give the necessary information for automatic process control systems. Hence, the reliability of this information obtained from different sensors is vital for good optimizing and process stability. If any of these on-line sensors do not operate perfectly as planned (having even small measurement error or malfunction), the process control will set the machine to operate away from the optimum, resulting loss of profit or eventual problems in quality or runnability. To assure optimum operation of the paper machines, a novel quality assurance policy for the on-line measurements has been developed, including control procedures utilizing traceable, accredited standards for the best reliability and performance.