• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.315-316
• /
• 2012

Three-level neutral point clamping (NPC) converter has been widely applied in high power drive system. And in this paper, a novel method is proposed to realize this algorithm based on FPGA, And the system is consist of two parts, the DSP part and FPGA part, the DSP part includes the control algorithms and the FPGA part works to generate and putout 12 PWM pulses. And the system is tested and verified using both simulation and experimentation.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.25-26
• /
• 2012

본 논문에서는 태양광 발전 시스템의 직류 모듈 집적형 전력변환장치를 인덕터 전류 및 입 출력 전압을 이용하여 MPPT 및 출력 전류 제한을 수행하는 제어 방법을 제안한다. 이를 통해 기존의 입 출력 전류 및 입력 전압을 이용하는 방식에 비해 전류 센서를 한 개 줄이면서 동일한 특성으로 제어가 가능하다. 또한 실험을 통해 제안하는 방식의 타당성을 검증한다.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.27-28
• /
• 2012

본 논문은 태양광 발전의 주변 환경 변화에 종속적인 태양광 모듈 출력을 개선하기 위해 사용되는 태양광 발전 시스템용 DC-MIC (Module Integrated Converter) 의 효율 향상을 위한 주파수 제어 기법을 제안한다. 최적 주파수 제어 기법을 위해 전부하 범위 DC-MIC의 효율을 이론과 실험을 통해 분석하였고 이를 바탕으로 기존의 고속의 스위칭 주파수 대비 스위칭 주파수를 낮춰 효율을 높이고 과도 상태 구간 동안 주파수를 높여 시스템 응답 속도를 높이는 시스템을 구현한다.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.821-824
• /
• 1993

This paper deals with a $3{\phi}$ rectifier unit for telecommunication system. The rectifier unit is developed to Cope with the step-up of the AC input voltatage from 220V to 380V. By using a buck-type converter in the front-end, it keeps the input power factor high and reduces the voltage ripple in the dc output. It also has a very wide voltage regulation range, which lets the unit be applied for both the 220V and 380V input system. The study includes the power conversion scheme, control strategy, snubber circuit and finally, experimental results.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.715-717
• /
• 1993

Resonant Inverter is analyzed by means of widely available software such a SPICE. In this paper, macro-model of RDCLI is used which is based on converter switch function rather than actual circuit configuration. Computer memory and nm time are greatly reduced compared to micro-model by using macro-model. System overall performance including control strategy and harmonic characteristics can be analyzed easily. This method is suited for stead state analysis and transition analysis at system level.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.4
• /
• pp.345-350
• /
• 2010

This paper presents a Photovoltaic Generation system using a Space Vector Modulation. PWM voltage source inverter using inverter consists of complex type of electric power converter to compensate for the defect, that is solar cell cannot be developed continuously by connecting with the source of electric power for ordinary use. It can cause the effect of saving electric power, from 10 to 20[%]. Synchronous signal and control signal was processed by the 56F8323 microprocessor for stable modulation. Also, Waveforms output current and voltage of system controlled so that phase conforms and can supply electric power that stabilize by the unit power factor.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1416-1417
• /
• 2007

The high frequency pulsed power system is widely available for use in high frequency generator applications. We designed and fabricated our own high frequency pulsed power system to obtain very sort pulse width and high peak value and investigated microbe removal characteristics using it. This paper introduces a simple high voltage high frequency pulsed power system for removing various bacteria caused by dirty water. This system include power supply circuit, switching MOSFET, and flyback converter. We can also control the switching using a PIC one chip microprocessor. As a result, we can obtain good removing characteristics of various bacteria by adjusting the charging voltage, the pulse repetition rate and the electrical field inducing time.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1670-1671
• /
• 2007

산업분야의 통신시스템에는 주로 RS232C 통신, RS485 통신, CAN 통신 등이 주로 사용되었다면 근래에는 고속통신이 가능하며 공장 자동화(CIM)나 시스템 통합에 편리한 이더넷통신이 사용되고 있는 추세이다. 즉, 기존의 PC와 프로세서간의 통신의 방식에서 랜 선을 이용하여 원거리에서 프로세서의 제어와 모니터가 가능하도록 구현되는 실정이다. 이더넷을 통해 연결된 시스템은 $10Mbps{\sim}100Mbps$의 빠른 속도로 모니터링과 제어가 가능하여 널리 사용되고 있다. 본 논문에서는 승압형 컨버터를 구현하기 위하여 마이크로프로세서는 컨버터의 입력전압과 출력전압이 필요하며 이를 마이크로프로세서 내부에 있는 12비트A/D변환기로 구현하였다. 전압 제어를 위해서 본 논문에서는 25us 마다 PWM의 ON/OFF 폭을 미리 예측한 후 타이머를 이용하여 A/D 변환을 하도록 하였다. 원 칩 마이크로프로세서인 DSP(TMS320F2812)의 PWM 기능을 이용하여 승압형 컨버터에서 출력되는 전압을 계측하여 PID 제어이론을 바탕으로 전압을 제어하였다.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.110-113
• /
• 2005

This paper proposes high speed SRM drive system for blower with a new 4-level inverter and precise excitation position generator. For the high speed blower, a proper 12/8 SRM is designed and analyzed. In order to get a fast build-up and demagnetization of excitation a current, now 4-level inverter system is proposed. The proposed 4-level inverter has additional charge capacitor, power switch and diode in the conventional asymmetric converter. The charged high voltage is supplied to the phase winding for fast current build-up, and demagnetization current is charged to additional capacitor of 4-level inverter. In addition, a precise excitation position generator can reduce turn-on and turn-off angle error according to sampling period of digital control system. The proposed high speed SRM drive system is verified by computer simulation.

• Journal of Power System Engineering
• /
• v.18 no.6
• /
• pp.193-199
• /
• 2014

The series connected battery cells are mainly used in high voltage battery pack application. However parameter inequality of each battery cell makes battery voltage imbalance problem. In this paper, a new balancing circuit utilizing converter scheme for the series connected battery cells is proposed. Proposed circuit offers easy control and fast equalization time. Moreover the circuit can be used in a practical application because it has high modularity and can operate during the charging/discharging cycle. To show its superiorness and effectiveness, the principle of proposed circuit is explained with computer simulation and experiment is carried out using lithium-ion battery.