• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.215-216
• /
• 2012

This paper proposes a modified converter topology from the existing loaded resonant converter and describe the development of 10kW(50~500V, 0~ 50A) DC/DC Converter using the proposed topology. The suggested converter, which revised the topology of the converter operating on the CCM(Continuous Conduction Mode) (above resonance), has the advantage of enhancing the efficiency of rated load operation by rapidly increasing the primary side resonant current and by improving the resonance current in a trapezoid shape. The proposed topology is described with analysis of operating mode and designed using PSpice simulation and the points on design to consider when implementing the topology are described. It is verified that the advantages of the proposed topology centered on rated load are effectively highlighted. Experimental results carried out at different condition and its results shows 98.5% efficiency at full load condition.

• Journal of Power Electronics
• /
• 제8권4호
• /
• pp.309-316
• /
• 2008

In this paper, new topology is proposed that can dramatically reduce the converter power rating and increase the efficiency of total PV system. Since the output voltage of PV module has very wide voltage range, in general, the DC/DC converter is used to get constant high DC voltage. According to analysis of PV characteristics, in proposed topology, only 20% power of total PV system power is needed for DC/DC converter. DC/DC converter used in proposed topology has flat efficiency curve at all load range and very high efficiency characteristics. The total system efficiency is the product of that of converter and that of inverter. In proposed topology, because the converter efficiency curve is flat all load range, the total system efficiency at the low power range is dramatically improved. The proposed topology is implemented for 200kW PCS system. This system has only three DC/DC converters with 20kW power rating each other. It is only one-third of total system power. The experiment results show that the proposed topology has good performance.

• Journal of Electrical Engineering and Technology
• /
• 제11권4호
• /
• pp.915-920
• /
• 2016

A power system designer may have difficulties in choosing a suitable multiple-input converter topology for a specific target application because each multiple-input converter topology presented in the literature has its own advantages and disadvantages. In this perspective, this paper presents a systematic topology selection method for multiple-input converters with three comparison criteria including cost-saving effect, modularity potential and flexibility. Based on these criteria, this paper proposes a strategic flow chart example for choosing a proper multiple-input converter topology. This flow chart will provide a powerful selection tool to a power system designer when he or she chooses a specific multiple-input converter for a given application.

• 한국인터넷방송통신학회논문지
• /
• 제21권3호
• /
• pp.129-135
• /
• 2021

스위치드 릴럭턴스 전동기 (Switched Reluctance Motor, SRM)는 전류의 크기와 회전자와 고정자의 상대적 위치에 따라 인덕턴스가 매우 비선형적으로 변하는 특성이 있고, 토크는 이 인덕턴스의 기울기에 비례하여 발생하기 때문에 비선형 토크 특성을 가지며 토크 맥동이 크고 소음이 심한 단점도 있다. 이러한 문제점들을 고려하고 경제성과 회로의 간단화를 위하여 기존의 비대칭 컨버터 (Asymmetric Bridge Converter)에서 효율과 성능을 개선할 수 있는 구동용 토폴로지(Topology)에 대한 연구들이 많이 진행되었다. 따라서 본 논문에서는 SRM 구동용 토폴로지로 적용하여 사용되고 있는 각 컨버터들을 비교, 분석함으로써 성능을 확인하고자 한다. 비교, 분석에 적용된 구동용 컨버터는 가장 널리 사용되고 있는 비대칭 브리지 컨버터 (Asymmetric Bridge Converter)와 C-dump 컨버터 형태의 구조를 가진 Conventional C-dump, Modified C-dump, Energy efficient C-dump, 공진형 C-dump 컨버터, 그리고 일반 전동기의 범용으로 사용되고 있는 6-Switch 인버터이다.

• 조명전기설비학회논문지
• /
• 제29권2호
• /
• pp.82-90
• /
• 2015

This paper proposes an efficient bi-directional DC/DC converter topology using multi-phase interleaved method for power storage system. The proposed converter topology is used for a power storage system using a vanadium redox flow battery(VRFB) and is configured to enable bidirectional power flow for charging and discharging of VRFB. Proposed DC/DC converter of the 4 leg method is reduced to 1/4 times the rating of the reactor and the power semiconductor device so can be reduce the system size. Also, proposed topology is obtained the effect of four times the switching frequency as compared to the conventional converter in each leg with a 90 degree phase shift 4 leg method. This can suppress the reduction of the life of the secondary battery because it is possible to reduce the current ripple in accordance with the charging and discharging of VRFB and may increase the efficiency of the entire system. In this paper, it proposed bidirectional high-efficiency DC/DC converter topology Using multi-phase interleaved method and proved the validity through simulations and experiments.

• Journal of Electrical Engineering and Technology
• /
• 제8권5호
• /
• pp.1078-1085
• /
• 2013

This paper presents a novel topology for cascaded transformer sub-multilevel converter. Eachsub-multilevel converter consists of two DC voltage sources with six switches to achieve five-level voltage. The proposed topology results in reduction of DC voltage sources and switches number. Single phase low frequency transformers are used in proposed topology and voltage transformation and galvanic isolation between load and sources are given by transformers. This topology can operate as symmetric or asymmetric converter but in this paper we have focused on symmetric state. The operation and performance of the suggested multilevel converter has been verified by the simulation results of a single-phase nine-level multilevel converter using MATLAB/SIMULINK.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.196-197
• /
• 2010

This paper investigates a high performance converter topology for hydrogen gas generation electrolysis system. The proposed converter topology consists of full-bridge inverter, medium frequency transformer, and diode rectifier. Hydrogen gas generation electrolysis process considered in the paper is analyzed and characterized by its equivalent circuit. The electrolysis cell is modeled as effective resistance, capacitance, inductance, and internal emf voltage source. The proposed converter topology provides enhanced efficiency of hydrogen gas generation process under the operating condition of dc output voltage with high frequency ripple on it. The high performance operation of proposed converter is confirmed through the simulation with the electrolysis cell considered in the equivalent circuit model.

• Journal of Power Electronics
• /
• 제19권4호
• /
• pp.944-955
• /
• 2019

In this paper, the three-level T-type neutral-point-clamped indirect matrix converter topology and the relative space vector modulation methods are introduced to improve the voltage transfer ratio and output voltage performance. The presented converter topology is based on combinations of cascaded-rectifier and three-level T-type neutral-point-clamp inverter. It can overcome the limitation of voltage transfer ratio of the conventional matrix converter and the high voltage rating of power switches of conventional matrix converter. Two SVPWM strategies for proposed converter are described in this paper to achieve the advantages features such as: sinusoidal input/output currents and three-level output voltage waveforms. Results from Psim 9.0 software simulation are provided to confirm the theoretical analysis. Hence, a laboratory prototype was implemented, and the experimental results are shown to validate the simulation results and to verify the effectiveness of the proposed topology and modulation strategies.

• 한국전자통신학회논문지
• /
• 제15권5호
• /
• pp.889-896
• /
• 2020

일반적으로 스텝 업(Step-up) 컨버터는 Boost 컨버터, Buck-Boost 컨버터, Flyback 컨버터, Push-Pull 컨버터 등 다양하며 이 중에서 Boost 컨버터는 매우 간단한 형태로 가장 널리 사용되는 스텝 업(Step-up) 컨버터이다. 하지만, Boost 컨버터는 DCM 동작, 큰 리플 문제 및 RHPZ 문제 등을 가지고 있다. 이러한 문제를 해결하기 위해 새로운 Topology를 적용한 컨버터들이 제시되었는데 그 중 KY 컨버터는 Boost 컨버터의 DCM 동작, 큰 리플 문제 및 RHPZ 문제 등을 개선하였다. 그러나 기존의 KY 컨버터는 Boost 컨버터보다 전압 이득이 상대적으로 낮은 단점이 있다. 따라서 본 논문에서는 기존의 KY 컨버터의 장점이 있으면서 낮은 전압 이득 문제를 해결한 새로운 Topology의 KY 컨버터를 제안하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 추계학술대회
• /
• pp.51-53
• /
• 2018

The Low Voltage DC-DC converters (LDCs) of the Electric Vehicles require high power density and high efficiency operation over the wide range of load and input voltage variations. This paper introduces a novel topology which combines three 1 MHz Half-Bridge (HB) LLC resonant converters and an Inverting Buck-Boost (IBB) converter to adjust the output voltage without frequency modulation. The switching frequency of the proposed converter is fixed at 1MHz to achieve a constant frequency operation for the resonant converter. In the proposed topology GaN FETs and planar transformers are employed to optimize the converter operation at high frequency. A 1 MHz/1.8 kW prototype converter is built to verify the feasibility and the validity of the proposed LDC topology.