• Korean Institute of Interior Design Journal
• /
• v.19 no.3
• /
• pp.154-161
• /
• 2010

Domestic distribution environment in Korea has rapidly and qualitatively been developed due to the open of distribution market. However, the function of commercial establishment goes beyond the place value that simple transaction of capacity takes place, and it is recognized as life groove space enhancing the satisfaction of costumers' purchasing pattern. For this reason, there has been the need to change the purchasing environment of commercial space. The change factors of commercial space contributed to the establishment of consumption identity formed by change of consumers' lifestyle and the purchasing pattern. It is necessary to see the change factors of the purchasing pattern as the conversion of distribution environment in terms of supplier and as the change of consumers' lifestyle in terms of consumers. In reality, however, the commercial facility ill-imitated the advanced model and qualitatively was developed. In this situation, the change of the purchasing pattern according to the conversion of facility is needed as an early stage. The purpose of this study is to analyze the overflow supply of commercial facility. Also It will discuss the plan characteristics of commercial space conversion of facility conforming to the change of the purchasing pattern that is predicted in the lifestyle on a conversion stage of facility.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.2
• /
• pp.177-186
• /
• 2017

This study concerned the analysis on the efficiency of the conversion of water tank type supply system to direct water supply system to examine the feasibility of the conversion, as well as the calculation of optimal conversion range that enables the supply of safe, high-quality water at stable pressure in accordance with the standards of water supply facility. The results of this research showed that when converting water supply system from water tank type supply system to direct water supply system, more nodal points could be properly converted and more reduction of electricity usage was expected in case water pressure rather than residence time was fixed. This means that higher efficacy can be obtained by fixing water pressure when converting water supply system. However, since the number of the locations that received on-spot inspection was small and the electricity usage measured was not exclusively by water supply facility, it is difficult to judge that such reduction of electricity usage accurately represents reduced electricity usage by water supply facility alone. therefore, after having secured on-spot information about a larger number of locations in apartment complexes that have converted water supply system, and utilizing information about electricity usage exclusively by water supply facility, the proposed method of this research could be applied to accurately deducing expected reduction of electricity usage by water supply facilities of various other apartment complexes. It is also considered possible to deduce an effective operation method of water supply system by finding out an area that shows low pressure or low residual chlorine concentration in the optimal conversion range of water supply, followed by estimating the proper location of pumping station or the proper chlorine dosage at the power purification plant that supply water to the target area.

• Journal of Korean Society for Atmospheric Environment
• /
• v.32 no.5
• /
• pp.526-535
• /
• 2016

Recently, fine dust in atmosphere have been considerably issued as a harmful element for human. Nitrogen oxide ($NO_x$) exhausted from diesel engines and power plants has been disclosed as a main source of secondary production of fine dust. In order to prevent exhausting these nitrogenous compounds into atmosphere, a treatment system with selective catalytic reduction (SCR) catalyst with ammonia as a reductant has been used in various industries. Urea solution has been widely studied to supply ammonia into a SCR catalytic reactor, safely. However, the conversion of urea solution to ammonia has several challenges, especially on a slow conversion velocity. In the present study, a fast urea conversion system including a plasma burner was suggested and designed to evaluate the performances of urea conversion and initial operation time. A designed lab-scale facility has a plasma burner, urea nozzle, mixer, and SCR catalyst which is for hydrolysis of isocyane. Flow rate of methane that is a fuel of the plasma burner was varied to control temperatures in the urea conversion facility. From experimental results, it is found that urea can be converted into ammonia using high temperature condition of above $400^{\circ}C$. In the designed test facility, it is found that ammonia can be produced within 1 min from urea injection and the result shows prospect commercialization of proposed technology in the SCR facilities.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.05a
• /
• pp.298-298
• /
• 2002

• Journal of the Korean housing association
• /
• v.21 no.5
• /
• pp.1-11
• /
• 2010

Due to the growing interest in eco-friendly and sustainable design in the architectural and urban planning field, we are witnessing numerous projects in which old buildings are being reused. However, with the exception of domestic apartments, there hasn't been a systematic approach or policy regarding the reuse of specific building types. On the other hand, we were able to point out two public building types, dong-offices and primary schools, that are expected to be underused, with future needs for conversion. Because the two building types are public buildings, we believe that their conversion must address the needs of the society. In this study, we have chosen 'social integration' as the ultimate goal of reusing public buildings. Upon the conceptual model of 'Housing-Mixed Public Facility', which was produced in a previous study, we have added other core programs that could be adopted into the model. Then, we applied the improved model onto the two building types by producing conversion plans and introducing key planning techniques. During this process, we have found some regulations that would not allow the realization of some models. Therefore, we have suggested amendments to the related regulations.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.169-174
• /
• 2002

In this paper, we suggest a new spatial information system called video GIS where video is used for spatial data construction and is integrated with map. We develop a prototype system of video GIS and apply it to roadside facility management. The main functions supported by the suggested system are data collection, coordinate calculation and conversion, data construction, analysis, searching, and browsing. The stereo images and corresponding position data are collected by a vehicle named 4S-Van that has GPS, IMU, and cameras. The 3-D coordinates of the objects in the images, such as road sign, signal lamp, and building, can be calculated and constructed from the collected data. The spatial objects are displayed on both image and map, and can be searched and browsed, which enables visual and realistic browsing and management of spatial objects. Compared to conventional field survey used in roadside facility management, the method enables faster, easier, and more efficient construction of spatial data. The suggested video GIS can be applied not only to roadside facility management but also to many similar projects of central or local governments that are related to GIS.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.303-308
• /
• 2003

Facility management system has been studied recently due to its increasing demand. As a starting step it is necessary to create 3-D shape of the facility. In this study, we attempted to create 3-D shape of the buildings by fusing the raster and vector information. the raster information comes from stereo aerial photographs and the vector information comes from the existing 2-D digital map. GPS surveying and data conversion using ACAD and ARCINFO also performed to extract building height from stereo aerial photographs. Finally we could be able to perform semi-automatic 3-D building modeling with fusion of two sources of information.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.962-965
• /
• 2005

A high intensity progressive wave tube is installed at Korea Aerospace Research Institute (KARI) for acoustic environmental tests. The test facility has 700 mm x 800 mm cross-sectional area, and provides acoustic environment of 165 dB over the frequency range of $25Hz{\sim}10,000Hz$. The facility consists of a 6 m long acoustic wave tube, acoustic power generation systems, gases nitrogen supply systems, and acoustic control systems. This paper describes how the basic parameters of the facility and power generation systems are controlled to meet the requirement of the test. The shape and length of the tube has been designed by using the size of test objects and the wave propagation characteristics of the tube. The capacity of acoustic power generation systems is determined by the energy conversion of acoustic wave and the efficiency of acoustic modulators. Moreover, the paper introduces test run results of the tube. Overall of 163dB has been generated by using the test facility.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.1013-1014
• /
• 2015

Regardless of the strict enforcement of prevention education in accordance with the school facility management standard, safety accidents that lead to human and physical damages occur in current educational facilities because of teenagers with very low sense of responsibility and insensitivity toward fire and facility safety. To ensure educational facility safety, technology that will enable a fast work process and easy confirmation of electronic blueprints and related documents about the educational facility through smart devices at the site by various means is needed. This paper proposes a system design linked to the National Education Information System (NEIS) that uses the document conversion function, high efficiency resolution, and Internet of Things (IoT) to inspect and control the educational facility in the event of a safety accident through the Educational Facility Resource Management System (EFRMS) that manages the electronic blueprints, and various educational facility documents through various smart devices.

• Spatial Information Research
• /
• v.21 no.5
• /
• pp.73-82
• /
• 2013

In recent years, according to the increase of interests in indoor space, various researches are being carried out for the construction and services of indoor spatial information. BIM data is very useful to build indoor spatial information. Accordingly, many studies for the use of BIM data on GIS part are in progress. In order to take advantage of BIM data on GIS part, the conversion technology for building indoor data and visualization techniques are required. However, most of the previous researches are focused on the conversion technology to construct indoor spatial information by importing BIM data into GIS applications while there is few research on visualization. In this study, an indoor LOD(Level of Detail) model is proposed to apply to on indoor facility management system when indoor data was constructed based on BIM data for the linkage between BIM and GIS.