• Journal of Gastric Cancer
• /
• v.15 no.4
• /
• pp.278-285
• /
• 2015

Purpose: Gastric submucosal tumors (SMTs) located very close to the esophagogastric junction (EGJ) are a challenge for gastric surgeons. Therefore, this study reports on the experience of using endoscopic and laparoscopic full-thickness resection (ELFR) with laparoscopic two-layer suturing in such tumors. Materials and Methods: Six patients with gastric SMTs very close to the EGJ underwent ELFR with laparoscopic two-layer suturing at Kyungpook National University Medical Center. With the patient under general anesthesia, the lesser curvature and posterior aspect adjacent to the EGJ were meticulously dissected and visualized using a laparoscopic approach. A partially circumferential full-thickness incision at the distal margin of the tumor was then made using an endoscopic approach under laparoscopic guidance. The SMT was resected using laparoscopic ultrasonic shears, and the gastric wall was closed using two-layer suturing. Thereafter, the patency and any leakage were checked through endoscopy. Results: All the ELFR procedures with laparoscopic two-layer suturing were performed successfully without an open conversion. The mean operation time was $139.2{\pm}30.9$ minutes and the blood loss was too minimal to be measured. The tumors from four patients were leiomyomas, while the tumors from the other two patients were gastrointestinal stromal tumors with clear resection margins. All the patients started oral intake on the third postoperative day. There was no morbidity or mortality. The mean hospital stay was $7.7{\pm}0.8$ days. Conclusions: ELFR with laparoscopic two-layer suturing is a safe treatment option for patients with an SMT close to the EGJ, as major resection of the stomach is avoided.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.8B
• /
• pp.514-524
• /
• 2005

In optical burst switching(OBS) networks, the ingress edge router assembles packets in the same class queue into the appropriate size of burst. A burst control packet(BCP) is generated for channel reservation of corresponding data burst and sent earlier than the corresponding data burst with an offset time. Offset time is determined considering the number of hops from source to destination and the required quality of service(QoS). After offset time, the burst data is passed through tile pre-configured optical switches without any O/E/O conversion. But a failure in OBS networks may lead to the loss of bursts until the ingress nodes receive the failure indication signal. This results in a significant degradation in QoS. Therefore, in this paper, we propose a fault-tolerant node architecture based on sub-carrier multiplexing to reduce the effects of failure in OBS networks. The Performance of the proposed fault-tolerant node architecture exhibits considerable improvement as compared with the previous ones.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.6
• /
• pp.608-618
• /
• 2004

In this paper, modifying the diode star double balanced mixer of Maas, a novel resistive 60 GHz pHEMT MMIC star mixer is suggested. Due to star configuration, troublesome IF balun for ring configuration FET mixer is not necessary. In addition, the sysematic design method of dual balun through EM simulation is suggested rather than the design by inspection as Maas. The mixer circuit is fabricated as MMIC on CPW base using 0.1 um GaAs pHEMT Library of MINT in Dongguk University. The size is 1.5 ${\times}$ 1.5 $\textrm{mm}^2$ and its performance is adjustable by DC supply. It can be operated as both up and down converters and it shows the conversion loss of about 13∼18 ㏈ over the full V-band frequencies.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.1 s.33
• /
• pp.67-72
• /
• 2005

Most of image binarization algorithms analyzes the intensity distribution using the histogram for the determination of threshold value. When the intensity difference between the foreground object and the background is great, the histogram shows the tendency to be bimodal and the selection of the histogram valley as the threshold value shows the good result. On the other side. when the intensity difference is not great and the histogram doesn't show the bimodal property, the histogram analysis doesn't support the selection of the proper threshold value. This Paper Proposed the novel binarization method that applies the fuzzy membership function to each color value on the RGB color model and, by using the operation results, separates the features having the great readability from the background. The proposed method prevents the loss of information incurred by the gray scale conversion by using the RGB color model and extracts effectively the readable features by using the fuzzy inference Compared with the traditional binarization methods, the proposed method is able to remove the majority of noise areas and show the improved results on the image of transport containers , etc.

• Journal of Korean Society for Geospatial Information Science
• /
• v.2 no.1 s.3
• /
• pp.99-106
• /
• 1994

Raster data mode and Vector data are the two major model in geographic information systems. These two data models are difficult to be intergrated because of their differences in structures and properties. Almost all of the current GIS systems process in one data model by converting one data type to another type. So. the loss and change of information caused by data conversiion degrades the accuracy of data. In this paper, we propose a new data model which can process two data models without conversion. We use quadtree for raster data and topological vector model for vector data. The output is formed as raster data model of quadtree. We can get more accurate overay output, and this intergrated model is more suitable for data like forest, landuses, soils that consist of classes which have small distribution changes.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.4
• /
• pp.473-482
• /
• 2013

The desulfurization ability of Sphingomonas subarctica T7b was evaluated using resting and immobilized cells with dibenzothiophene (DBT), alkyl DBTs, and commercial light gas oil (LGO) as the substrates. The resting cells of S. subarctica T7b degraded 239.2 mg of the initial 250 mg of DBT/l (1.36 mM) within 24 h at $27^{\circ}C$, while 127.5 mg of 2-hydroxybiphenyl (2-HBP)/l (0.75 mM) was formed, representing a 55% conversion of the DBT. The DBT desulfurization activity was significantly affected by the aqueous-to-oil phase ratio. In addition, the resting cells of S. subarctica T7b were able to desulfurize alkyl DBTs with long alkyl chains, although the desulfurization rate decreased with an increase in the total carbon number of the alkylated DBTs. LGO with a total sulfur content of 280 mg/l was desulfurized to 152 mg/l after 24 h of reaction. Cells immobilized by entrapment with polyvinyl alcohol (PVA) exhibited a high DBT desulfurization activity, including repeated use for more than 8 batch cycles without loss of biodesulfurization activity. The stability of the immobilized cells was better than that of the resting cells at different initial pHs, higher temperatures, and for DBT biodesulfurization in successive degradation cycles. The immobilized cells were also easily separated from the oil and water phases, giving this method great potential for oil biodesulfurization.

• Journal of Convergence for Information Technology
• /
• v.10 no.7
• /
• pp.7-13
• /
• 2020

IoT which is the core IT of the 4^th industrial revolution, is providing various services from users in the conversion with other industries. The IoT convergence technology is leading the communication paradigm of communication environment in accordance with the increase of convenience for users. However, it is urgently needed to establish the security measures for the rapidly-developing IoT convergence technology. As IoT is closely related to digital ethics and personal information protection, other industries should establish the measures for coping with threatening elements in accordance with the introduction of IoT. In case when security incidents occur, there could be diverse problems such as information leakage, damage to image, monetary loss, and casualty. Thus, this paper suggests a certificate management technique for safe control over access in IoT-based Cloud convergence environment. This thesis designed the device/user registration, message communication protocol, and device renewal/management technique. On top of performing the analysis on safety in accordance with attack technique and vulnerability, in the results of conducting the evaluation of efficiency compared to the existing PKI-based certificate management technique, it showed about 32% decreased value.

• Archives of Pharmacal Research
• /
• v.26 no.10
• /
• pp.826-831
• /
• 2003

ADP-ribose pyrophosphatase (ADPRase) hydrolyzes ADP-ribose (ADPR) into AMP and ribose-5'-phosphate. It is classified into two groups, $Mg^{2+}$-dependent and $Mg^{2+}$-independent ADPRase, depending on its $Mg^{2+}$requirement. Here, we purified $Mg^{2+}$-dependent ADPRase from rabbit liver and examined what factors affect $Mg^{2+}$ requirement. The purified enzyme showed a single band with the molecular weight of 34 kDa on SDS-PAGE both in the presence and absence of 2-mercaptoethanol. The molecular weight of the native enzyme calculated by gel filtration was 68 kDa, indicating that ADPRase is a dimer made up of two identical subunits. $Mg^{2+}$-dependent ADPRase with the highest ADPR affinity had a $K_m$ of 160$\pm$10 $\mu$M and a pH optimum of around pH 9.5. Treatment of the purified ADPRase with heated cytosol fractions at 37$^{\circ}C$ for 3 h caused some changes in the chemical properties of the enzyme, including an increase in molecular weight, a decrease in solubility, and a loss of $Mg^{2+}$-dependency. The molecular weight of the cytosol-treated ADPRase measured by gel filtration was over 420 kDa, suggesting, for the first time, that ADPRase could be polymerized by undefined cytoplasmic factors, and that polymerization is accompanied by changes in the solubility and metal ion dependency of the enzyme.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.3
• /
• pp.305-312
• /
• 2010

The aim of this study is to find an analytic solution to the problem of determining the optimal capacity of a batch-storage network to meet demand for finished products in a system undergoing joint random variations of operating time and batch material loss. The superstructure of the plant considered here consists of a network of serially and/or parallel interlinked batch processes and storage units. The production processes transform a set of feedstock materials into another set of products with constant conversion factors. The final product demand flow is susceptible to joint random variations in the cycle time and batch size. The production processes have also joint random variations in cycle time and product quantity. The spoiled materials are treated through regeneration or waste disposal processes. The objective function of the optimization is minimizing the total cost, which is composed of setup and inventory holding costs as well as the capital costs of constructing processes and storage units. A novel production and inventory analysis the PSW (Periodic Square Wave) model, provides a judicious graphical method to find the upper and lower bounds of random flows. The advantage of this model is that it provides a set of simple analytic solutions while also maintaining a realistic description of the random material flows between processes and storage units; as a consequence of these analytic solutions, the computation burden is significantly reduced. The proposed method has the potential to rapidly provide very useful data on which to base investment decisions during the early plant design stage. It should be of particular use when these decisions must be made in a highly uncertain business environment.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.6
• /
• pp.43-49
• /
• 2015

In this paper, we propose enhanced wireless power transfer system based on magnetic resonance for portable electronic device charging. Resonators were designed and fabricated for efficiency improvement and miniaturization through electromagnetism simulation using HFSS(High Frequency Structure Simulator). Impedance matching network is employed to minimize reflections that is caused by difference between input impedance and output impedance. Receiver IC that consist of rectifier and Low Drop Out(LDO) regulator were designed and fabricated to reduce power loss. This chip is implemented in $0.35{\mu}m$ BCD technology. A maximum overall efficiency of 73.8% is determined for the system through experimental verification.