• Culinary science and hospitality research
• /
• v.6 no.1
• /
• pp.225-252
• /
• 2000

This study aims to examine theoretical frame work of franchise restaurant, the characteristics of store manager's job and the level of their job satisfaction through an empirical investigation. Job satisfaction survey study shows that store managers consider important all work to be attended to as part of their duty with service management on top. It is also found that the majority of store managers consider their aptitude as most important job satisfaction factor and those, who are satisfied with their job content, advancement and the prospect, are more proactive in delivering qualify service and more than willing to commit themselves to their duties. Regrading demographical variables, store managers with scholarly competence and higher pay level are more likely to be satisfied with their job but married men are not satisfied with the work environment in general. Ergo, Businesses should correspond by capitalizing on those store managers content with their duty thus collecting additional information and providing opportunities to further contribute to the business. For those dissatisfied individuals, however, businesses should determine their demands and by educational training supply a motive therefore making possible the conversion of such individuals to satisfied store managers and their active participation in business management. But, as with any study, this one has a number of limitation which constraints the generalizability of the empirical findings. It has not been for long since franchise restaurants established in domestic market and has been few studies regarding this topic there. Furthermore, managers are not willing to release operation related data. Therefore, further study are urged to overcome this limitation and should examine other dimensions of job satisfaction such as relations between revenue and profit with the level of store manager's job satisfaction remain to be investigated.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.547-553
• /
• 2017

Thermal analysis of three energetic materials used in pyroelectric device was performed using Differential Scanning Calorimetry (DSC). The theoretical method for extracting the reaction rate equation of energetic materials using DSC experimental data is proposed and the reaction rate extraction is performed. The results of the DSC were analyzed by the conversion method such as Friedman. Activation energy and frequency factor according to mass fraction were extracted to complete the reaction rate equation. The extracted reaction rate equation has a form that represents the entire chemical reaction process, not the assumption that the chemical reaction process of the high energy material is a main step in several stages. It has considerable advantages in terms of theoretical and accuracy as compared with the chemical reaction rate form extracted through conventional thermal analysis experiments. Using the derived reaction rate equation, we predicted the performance change of three energetic materials operating on actual storage condition over 20 years.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.4
• /
• pp.387-394
• /
• 2011

A study on the removal of sulfur dioxide and nitrogen oxide was carried out using a non-thermal nano-pulse corona discharger at different gas temperatures. Pulse voltage with a high voltage of 50 kV, a pulse rising time of about 100 ns, a full width at half maximum of about 500 ns and a frequency of 1 kHz was applied to a wire-cylinder corona reactor. Ammonia and propylene gases were added into the corona reactor as additives with a static mixer. Ammonia addition had less effect on $SO_2$ reduction at the higher temperature because of the retardation of ammonium sulfate formation. However, propylene addition enhanced NO reduction at higher temperature due to increased gas mixture. $SO_2$ was further removed at the mixed $SO_2$ and NO gas due to increased $NO_2$ by the conversion of NO. The addition of ammonia and propylene gases was more highly dominant for the removal of sulfur dioxide compared to the sole pulse corona without the additives. However, the specific energy density per unit concentration of pulse corona as well as propylene additive was an important factor to remove NO gas. Therefore, the specific energy density per unit concentration of 0.04 Wh/($m^3{\cdot}ppm$) was necessary for the NO removal of more than 80% with the concentration ratio of 2.0 for propylene and NO. Hydrogen peroxide was another alternative additive to remove both $SO_2$ and NO in the nano-pulse corona discharger.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1992.05a
• /
• pp.110-113
• /
• 1992

$n^{+}$-p homojunction InP diodes were fabricated using thermal diffusion of Sulfur into p-type InP substrates(Zn doped, LEC grown, p=2.3${\times}$10$^{16}$c $m^{-3}$). The Sulfur diffusion was carried out at 550$^{\circ}C$, 600$^{\circ}C$, 700$^{\circ}C$ for 4 hours in a sealed quartz ampule(～2ml in volume) containing 5mg I $n_2$ $S_3$ and Img of red phosphorus. The formed junction depth was below 0.5$\mu\textrm{m}$. After the removal of diffused layer on the rear surface of the wafer, the beak ohmic contacts to the p-side were made with a vacuum evaporation of An-Zn(2%) followed by an annealing at 450$^{\circ}C$ for 5 minutes in flowing Ar gas. The front contacts were made with a vacuum evaporation of Au-Ge(12%) followed by an annealing at 500$^{\circ}C$ for 3 minutes in flowing Ar gas. The remarkable sprctral response of the cells obtained at the region of 6000-8000${\AA}$ region. The open circuit voltage $V_{oc}$ , short circuit current density $J_{sc}$ , fill factor and conversion efficiency η of the fabricated pattern solar cells(diffusion condition : at 700$^{\circ}C$ for 4 hours) were 0.660V, 14.04㎃/$\textrm{cm}^2$, 0.6536 and 10.09%, respectively.y.

• Current Photovoltaic Research
• /
• v.3 no.4
• /
• pp.135-139
• /
• 2015

$Cu_2SnS_3$ (CTS) based thin film solar cells (TFSCs) are of great interest because of its earth abundant, low-toxic and eco-friendly material with high optical absorption coefficient of $10^4cm^{-1}$. In this study, the DC sputtered precursor thin films have been sulfurized using rapid thermal annealing (RTA) system in the graphite box under Ar gas atmosphere for 10 minute. The systematic variation of sulfur powder during annealing process has been carried out and their effects on the structural, morphological and optical properties of CTS thin films have been investigated. The preliminary power conversion efficiency of 1.47% with a short circuit current density of $33.9mA/cm^2$, an open circuit voltage of 159.7 mV, and a fill factor of 27% were obtained for CTS thin film annealed with 0.05g of S powder, although the processing parameter s have not yet been optimized.

• Archives of design research
• /
• v.12 no.4
• /
• pp.243-250
• /
• 1999

Interior design is depend on combination way of between invisible meaning and visible form, then it has a several meaning by that. The meaning of interior space is a invisible concept which is shown by a form and it is mainly recognized by a image. The purpose of this study is to explore that characters of image in communication process, typical aspect and structural aspect have been shown in interior design. On this study, I try to study space analysis about commercial space to explore character of spatial image through theoretical approach. In a result, the image of interior space is made by deep representation as a designer's basic concept and is delivered by conversion of various codes. Therefore, the image of interior space is not a additional concept which is made by natural factor of space, it is a design concept which must be dealt with space planning.

• Journal of the Korean Society of Safety
• /
• v.26 no.4
• /
• pp.41-46
• /
• 2011

The purpose of this paper is to analyze the causes of accidents related to the 3 phase 170 kV gas insulated switchgear of a power system collected from accident sites to secure data for the prevention of similar accidents and provide important points of view regarding diagnosis for the prevention of accidents involving gas insulated switchgears. The analysis results of the causes of accidents involving gas insulated switchgears showed deformation of the manipulation lever installed at the S-phase, disconnection of the insulation rod connection, melting of the upper conductor, a damaged tulip, damage to the lower spacer and the spacer at the breaker, etc. It is believed from this result that the potential for accidents has expanded due to accumulated energy as a result of repeated deterioration. The carbonization depth of a GIS was formed near the screw (T2, T3) used to secure the lower pole of the S-phase tulip. It is not known what has caused the screws to be extruded and melted. However, it is thought that an unbalanced electromagnetic force, micro-discharge, surface discharge, etc., have occurred at that point. In addition, even though 16 years have passed since its installation, there was no installation defect, act of arson, accidental fire, etc. General periodical inspection and diagnosis failed to find the factors causing the accidents. As a system contained in a closed metal container, it has a high risk factor. Therefore, it is necessary to design, install and operate a GIS in accordance with the standard operational procedure (SOP). In addition, it is necessary to apply conversion technology for periodical SF6 gas analysis and precision safety diagnosis. It is expected that tracking and managing these changes in characteristics by recording the results on the history card will provide a significant accident prevention effect.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.390-392
• /
• 2005

The digital radiation detectors are used clinically by diagnostic apparatus. However the digital radiation detector are some problem like high operating voltage, light blurring, low conversion efficiency, low fill factor, etc. Thus we propose a new radiation detector that the photoconductor layer and liquid crystal layer are coupled in sandwich structure. X-ray absorption in the photoconductor layer controls the state of the liquid crystal via creation of charge carrier and the light modulation of liquid crystal make image formation. The advantage of the new radiation detector is that high resolution image is acquired and the signal amplification is possible by external visible light source. In this study, we study the optical properties and electrical properties of the new radiation detector to irradiate X-ray. The Mercury Iodide($HgI_2$) was used by photoconductor material, and the aluminum is used by reflective layer. The thickness of Mercury Iodide is about $200{\mu}m$, the operating voltage of the liquid crystal is 1.5~5V. The electrical properties of Mercury Iodide was measured, and the transmission efficiency of liquid crystal was measured by modulation potential.

• Journal of the Korean Vacuum Society
• /
• v.22 no.4
• /
• pp.211-217
• /
• 2013

Two types of organic thin film solar cell devices with bulk hetero-junction (BHJ) structure were fabricated on plastic substrates using conjugated polymers of $PCDTBT:PC_{71}BM$ and $PTB7:PC_{71}BM$ blended as active channel layer. Time-variant characteristics of the organic thin film solar cell devices were investigated: short circuit current density ($J_{SC}$); open circuit voltage ($V_{OC}$); ; fill factor (FF); power conversion efficiency (PCE, ŋ). All the performance parameters were degraded by progress of the measurement time, while $V_{OC}$ showed the most drastic decrease with time. Possible factors to cause the time-variant alteration of performance parameters were discussed to be clarified.

• Journal of Preventive Medicine and Public Health
• /
• v.19 no.2 s.20
• /
• pp.281-292
• /
• 1986

Infection by hepatitis B virus is one of the major health problems of this nation. HBsAg positive rates of general population and school children were known to be as about 8 percent and 3.9 to 5.9 percent respectively. To study the incidence rate of hepatitis B infection in school children of rural area, author had examined 475 school children of relatively isolated agricultural area for baseline prevalence of hepatitis B virus serologic markers and followed up 415 school children during 10 months to determined the frequency of serologic conversion. The major results are summarized as followings: 1) Among the 278 susceptible children who were followed up, 26 had seroconversion for HBsAg or Anti-HBs. Therefore, the cumulative incidence rate during 10 months is estimated 9.4%. 2) The incidence rate of hepatitis B infection tends to increase with age (6-9yrs: 3.2%, 10-14yrs: 9.5%, 15-17yrs: 18.9%), and the incidence rate in male (13.0%) was higher than in female (5.7%). 3) The incidence rates of hepatitis B virus infection were not different statistically among three economic classes (The rates of lower, middle and higher class were 11.8%, 7.1% and 10.5%.). 4) The incidence rates of hepatitis B virus infection were not different statistically between visitors and non-visitors of clinic or hospital, dental clinic, persons received IV and not received IV, and persons with familial history and without familial history of liver diseases. Therefore all of these factors were not identified as risk factor of hepatitis B virus infection. And the transmissibility within the class of school was not recognized, too. 5) Among the 25 children who were HBsAg positive when enrolled, 15 (60%) were still HBsAg positive, who were identified as chronic carrier 15 of 415 school children were chronic carriers, then chronic carrier rate was estimated 3.6%, and there was no difference between sexes. 6) Of 38 children who had been Anti-HBs positive when enrolled, 5 (13.2%) lost Anti-HBs. Therefore, the loss rate of Anti-HBs per year is estimated to be 15.8%.