• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.72-76
• /
• 2015

Capital project benchmarking requires an effective cost normalization process to compare cost performance of projects accomplished in different time and location. Existing cost normalization approaches have been established based on the assumption that all required information for cost normalization is fully identified once a project is completed. Cost normalization, however, is sometimes required to evaluate phase-level outcomes of an ongoing project where the required information is not fully available. This paper aims to provide a cost normalization procedure for phase-based performance assessment. The procedure consists of three normalization steps: currency conversion, location adjustment, and time adjustment considering various scenarios where the required information is not fully identified. This paper also presents how the cost normalization procedure has been applied to the 10-10 Performance Assessment Program, which is a phase-based performance assessment system developed by the Construction Industry Institute (CII). Both researchers and industrial professionals can apply the cost normalization procedure to studies and practices regarding to cost estimation, feasibility analysis, and performance assessment.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.265-266
• /
• 2006

The chemical conversion coating formed on magnesium alloy investigated for low cost and harmless in environment by using the colloidal silica as the main component. The film formed in 298 K is thick, the film, which was thought combination of Si-O, was formed. The film formed in 313 K is thinner than that in 298 K. The quantity of film formed at high temperature such as 333 K and 353 K is smaller than dissolved quantity. At the anodic polarization experiment, corrosion resistance in sealing by hot water after chemical conversion treatment in basic solution condition get worse than that in comparison with basic solution condition. In salt spray test, the ratio of black rust on specimen that did not conducted chemical conversion treatment was five times or more compared with those of chemical conversion treated specimen. The film thickness of chemical conversion coating produced by alkali treatment process is thinner than in comparison with that of specimen produced in basic chemical conversion treatment solution condition. It is thought, however, that it showed good corrosion resistance during salt spray test because the area of microcracks is small.

• Journal of Power Electronics
• /
• 제13권5호
• /
• pp.737-745
• /
• 2013

Offshore wind farms are rapidly growing owing to their comparatively more stable wind conditions than onshore and land-based wind farms. The power capacity of offshore wind turbines has been increased to 5MW in order to capture a larger amount of wind energy, which results in an increase of each component's size. Furthermore, the weight of the marine turbine components installed in the nacelle directly influences the total mechanical design, as well as the operation and maintenance (O&M) costs. A reduction in the weight of the nacelle allows for cost-effective tower and foundation structures. On the other hand, longer transmission distances from an offshore wind turbine to the load leads to higher energy losses. In this regard, DC transmission is more useful than AC transmission in terms of efficiency because no reactive power is generated/consumed by DC transmission cables. This paper describes some of the challenges and difficulties faced in designing high-power-density power conversion systems (HPDPCSs) for offshore wind turbines. A new approach for high gain/high voltage systems is introduced using transformerless power conversion technologies. Finally, the proposed converter is evaluated in terms of step-up conversion ratio, device number, modulation, and costs.

• 한국경영과학회지
• /
• 제38권1호
• /
• pp.123-138
• /
• 2013

Keyword advertising has been used as a promotion tool rather than the advertising itself to online retailers. This is because the online retailer expects the direct sales increase when they deploy the keyword sponsorship. In practice, many online sellers rely on keyword advertising to promote their sales in short term with limited budget. Most of the previous researches use direct revenue factors as dependent variables such as CTR (click through rate) and CVI (conversion per impression) in their researches on the keyword advertising[14, 16, 22, 25, 31, 32]. Previous studies were, however, conducted in the context of aggregate-level due to the limitations on the data availability. These researches cannot evaluate the performance of keyword advertising in the individual level. To overcome these limitations, our research focuses on conversion of keyword advertising in individual-level. Also, we consider manageable factors as independent variables in terms of online retailers (the costs of keyword by implementation methods and meanings of keyword). In our study we developed the keyword advertising conversion model in the individual-level. With our model, we can make some theoretical findings and managerial implications. Practically, in the case of a fixed cost plan, an increase of the number of clicks is revealed as an effective way. However, higher average CPC is not significantly effective in increasing probability of purchase conversion. When this type (fixed cost plan) of implementation could not generate a lot of clicks, it cannot significantly increase the probability of purchase choice. Theoretically, we consider the promotional attributes which influence consumer purchase behavior and conduct individuals-level research based on the actual data. Limitations and future direction of the study are discussed.

• 전력전자학회논문지
• /
• 제18권2호
• /
• pp.117-122
• /
• 2013

The distributed power conversion LED driver circuit using parasitic inductance is proposed in this paper. while the conventional LED driver circuit is composed of the large size devices and heatsinks, the proposed circuit can be realized with the small sized no heatsink based. since the processing power can be effectively distributed. Also by using the wire parasitic inductance of the LED string, the proposed circuit can be implemented without external magnetic device. As a result, the proposed circuit which features the small size and volume con be realized even without LED driver module(LDM) board. since, all the device can be attached to the existing LED array Module(LAM) board. Therefore, it features that cost savings and volume reduction of circuit. To confirm the validity of the proposed circuit, theoretical analysis and experimental results from a distributed power conversion LED driver circuit prototype are presented.

• 대한임베디드공학회논문지
• /
• 제5권2호
• /
• pp.67-76
• /
• 2010

Although both functional verification and performance evaluation are necessary for the development of effective and reliable communication systems, they have been often performed independently; by functional modeling with formal language tools and by performance modeling with professional network performance evaluation tools, respectively. Separate and repeated modeling of one system, however, would often result in cost increase and inconsistency between the models. This paper proposes an integrated model design approach in order to overcome this problem that evaluates the performance of a communication protocol designed in SDL with SDL-OPNET model conversion. The proposed technique generates OPNET skeleton code from Tau-generated C code of the SDL model by analyzing the relations between SDL and OPNET models. IEEE 802.2 LLC protocol was used as an example of model conversion to show the applicability and effectiveness of the proposed technique.

• Advances in Energy Research
• /
• 제3권3호
• /
• pp.143-155
• /
• 2015

The Nile blue has been used as a photosensitizer with Arabinose as a reductant in photogalvanic cell for optimum conversion efficiency and storage capacity. Reduction cost of the photogalvanic cell for commercial utility. The generated photopotential and photocurrent are 816.0 mV and $330.0{\mu}A$ respectively. The maximum power of the cell is $269.30{\mu}W$ where as the observed power at power point is $91.28{\mu}W$. The observed conversion efficiency is 0.6095% and the fill factor 0.2566 has been experimentally found out at the power point of the photogalvanic cell, whereas the absolute value is 1.00. The photogalvanic cell so developed can work for 120.0 minutes in dark if it is irradiated for 200.0 minutes that is the storage capacity of photogalvanic cell is 60.00%. The effects of different parameters on the electrical output of the photogalvanic cell have been observed. A mechanism has also been proposed for the photogeneration of electrical energy.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1146-1147
• /
• 2008

PV Power Conditioning System (PCS) must have high conversion and low cost. Generally, PV PCS uses either a single converter or multilevel module integrated converter (MIC). Each of these approaches has both advantage and disadvantage. For a high conversion efficiency and low cost of PV module, this paper proposes series connection of module integrated DC-DC converter's output with PV panel. Output voltage of PV panel is connected to the output capacitor of flyback converter. Thus, converter's output voltage is added to the output voltage of PV panel. Isolated DC-DC converter generates only the difference voltage between the PV panel voltage and the required total output voltage. This method reduces power level of DC-DC converter and enhances the energy conversion efficiency compared with conventional DC-DC converter.

• 여성건강간호학회지
• /
• 제17권4호
• /
• pp.328-336
• /
• 2011

Purpose: The purpose of this study is to develop the optimal nursing fee for nurse-midwifery center (MC) in the national health insurance system. Methods: The three methodologies used to calculate the conversion factors for the MCs in the national health insurance include cost accounting method, sustainable growth rate (SGR) model, and index model. In this study, the macro-economic indicators and the national statistics were used to estimate the conversion factors for the MCs. Results: The optimal nursing fee for the MCs in 2011 was estimated to be an increase of 57.7% by cost accounting analysis, a decrease of 17.1% by SGR model, and a decrease of 16.1% by index model. The results from SGR model and index model could had been biased due to the upswing of medical spendings in the short-term period (2008~2009). A sensitivity analysis of pre-delivery subsidy program for OB & GYN hospitals and clinics showed that the program has substantially diminished the demand for the MC services. Conclusion: More reliable methodologies to estimate nursing fees precisely are required to prove the value of nurses' services and a government subsidy program for the MC services should be followed from a social perspective.

• 한국산학기술학회논문지
• /
• 제12권7호
• /
• pp.3275-3279
• /
• 2011

유무선망 상호접속 서비스 제공을 통한 통화요금의 사업자별 배부가 서비스 설비원가에 의하여 많은 부분이 정의되는 점을 고려한다면 망 설비를 통하여 제공되는 서비스들의 통화량 기준에 의한 평가가 이루어져야 한다. 이러한 관점에서 이동통신망 설비를 음성, 데이터서비스를 위한 전용설비와 공통설비로 구분하고, 공통설비는 합리적 기준에 의한 서비스별 설비원가의 배부 방법의 도출이 필수적이다. 본 논문에서는 유럽 GSM 시스템에서 이용되고 있는 이동통신망 공통설비 원가 배부 방안 분석을 통하여 국내 CDMA 이동망의 공통설비 원가 배부를 위한 회선 음성 서비스와 패킷 데이터서비스간의 단일 통화량으로 계측하기 위한 서비스간 환산계수 방안을 도출하였다.