• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.spc
• /
• pp.61-67
• /
• 2023

Special equipment used for snow removal is only used in the winter and must be moved into storage during non-winter seasons. However, when moving heavy equipment using a forklift within a limited space, safety accidents may occur due to deformation and damage due to the worker's limited visibility and excessive loading of heavy objects. In this study, the scissors boom of the developed heavy load transporter was conducted in two cases: link structural analysis and position-based structural analysis. In detail, the link structural analysis covers four cases of stress and safety factor according to material and thickness to optimize the specifications of the material selected during development, and the structural analysis according to position covers two cases before and after the lift, when maximum stress concentration is achieved. Safety was evaluated through finite element analysis. As a result of the study, when manufacturing a scissors boom type heavy load transporter that can withstand a load of 10 tons, the link showed safety at SS400 4.5mm or higher, and reinforcement is needed in the upper and lower structures, so it is judged to be useful in applying materials according to the load.

• Journal of the Korea Safety Management & Science
• /
• v.20 no.3
• /
• pp.27-36
• /
• 2018

The steel pipe manufacturing industry deals with facilities and materials. Especially thermal facilities are close to vapor cloud explosion (VCE) and may cause secondary damage to facilities because they deal with corrosive substances such as hydrofluoric acid, sulfuric acid and acid, fire, explosion, leakage etc. It is in danger. In this study, hazard identification method was conducted using HAZOP techniques and quantitative risk analysis was conducted using e-CA, a program that supports accident impact analysis. Equipment in the influence range of ERPG - 3 was determined to be a facility requiring replacement. It was decided that neutralization is necessary using slaked lime. Based on the cost of loss, We presented the proper replacement which is the timing of the dangerous facility. As a result, It was ideal to replace the facilities with 20 years of heat treatment facilities, one year of hydrofluoric acid storage tank, 20 years of sulfuric acid storage tank, and 5 years of hydrochloric acid storage tank.

• Journal of Institute of Convergence Technology
• /
• v.2 no.2
• /
• pp.20-24
• /
• 2012

In this paper, we perform a ANSYS simulation of assembly structure composed of three parts, bolt, nut, and coil spring, under the loading of a screw torque 640~800 ($N{\cdot}m$) derived from the given bolt tensile strength 10.9, which allows us to investigate a lock-nut mechanism for the prevention of bolt-loosening after three parts are fastened. And also we investigate the safety factor of each component with effective stress distribution obtained from the simulation, which enables us to estimate the structural safety of a new lock-nut structure. Both simulation and investigation shown in this paper will contribute to the development of a new lock nut structure.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.5
• /
• pp.811-816
• /
• 2022

Even though continuous management and supervision of reinforcement of policies to safeguard accidents at workplace and work sites were implemented. Accident prevention activities such as inspection and diagnosis are urgently required to induce a preliminary investigation to identify the risk factors for each type of work, before the work task to eliminate risks at the worksites. Since safety inspections at work sites were generally conducted through visual inspections, the results of safety inspections may vary depending on the findings and proficiency of the safety officers. The results of those inspections may have loopholes to prevent potential accidents at work. Therefore, the purpose of this study was to develop a risk identification checklist that can effectively perform safety inspections to prevent accidents at work sites. This study initially analyzed the previously developed accident checklist to identify current complications and issues in safety checklists. Based on the findings of major industrial accidents over the past three years, the relationship between accident, workplace, and work type were analyzed refereeing the safety inspection standards. A risk recognition-checklist was developed to provide basic data on identifying risk factors, and inspection guidance at work sites. To prepare for potential accidents by identifying and taking countermeasures to mitigate the high risk and serious accidents at sites by the guidelines of the checklist. The developed inspection checklist has been practically used by experts at work sites to perform safety inspections, and it has been verified its suitability, and feasibility, to prevent or mitigate workplace accidents, including securing the safety and health of field workers. The role of the developed safety checklist has been considered effective at worksites.

• Journal of Construction Engineering and Project Management
• /
• v.2 no.3
• /
• pp.48-57
• /
• 2012

With increasing number of serious construction disasters such as death, a safety management in real-time is more required recently. One of the ways to support the needs, a convergence with Information Technology (IT) has been noticed. Although number of inefficiencies including a limitation of IT equipment (weight, control inconveniences) has been concerned, data exchanging and processing fields have been improved at a wide range with an advance of mobile communication and an introduction of smart mobiles that are simple and convenient. In this research, a framework is realized in connection with smart mobile to find the problems of current safety management and derive demands in order to support effective safety management. Two smart mobile applications, Safety Management application and Safety Guideline application, enable a real-time safety management and less re-work by provided safety information.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.4
• /
• pp.25-34
• /
• 2017

Offshore plants should be managed at a high level of safety condition. Because the offshore plant has cramped space and has difficult access when a fire occurred, a fire can be critical to the plants. LED lighting can reduce the risk of fire by its lower energy consume suitable to intrinsic safety and lower heat radiation that can reduce the possibility of ignition. Also LED has a long lifetime. Though LED luminaire has various advantages for offshore plants, an international standard for the luminaire has not provided because it is new technology. Because there is no international and domestic standard specially provided for the LED luminaire, a guideline is required for developing the LED light and for the future establishment of an international standard. This study was conducted to develop the guideline for LED luminaire for offshore plants. Firstly, relevant standards were analyzed for the guideline. Then we found that there are editorial differences between international standards and domestic standards. So the guideline was developed based on international version and the differences between the domestic and international standard were provided to let Korean developers recognize the differences.

• Journal of the Korean Society of Safety
• /
• v.28 no.2
• /
• pp.73-77
• /
• 2013

Leisure activities alter overland tourism into marine tourism according to a rise in national income. It is expected that the leisure boat with period of introduction in marine tourism will be developed rapidly. It needs to unite with marine technology, optimized layout design, interior design and so on in order to build a yacht of high quality. Because optimized layout design and interior design technique increase the added value of the yacht, it needs to be convergence technology between Ergonomics, Sensibility Ergonomics, and design technique. In this study, we analyzed traffic line of crews in a sailing yacht and assessed working posture using OWAS, RULA and REBA tools. Also we suggested tips of Ergonomic design in the sailing yacht.

• Journal of the Korea Convergence Society
• /
• v.9 no.8
• /
• pp.155-160
• /
• 2018

Automotive seat is a part to supply the convenience and safety of driver at driving. Recently, the seat has the role to protect driver from the outside impact or vibration and give the convenience except such a usage as chair. The design on structural function of the seat frame is important like the impact safety and durability. In this study, the seat is designed by adding one hollow rod to the part of seat back frame in order to enhance the structural safety and durability. This study was carried out by using CATIA and ANSYS as the design and analysis programs. As this study result through the structural and vibrational analyses, model 4 was seen to have the durability more superior than the other models. By utilizing this result, it is thought to be the useful material at designing the automotive seat frame with durability. It is possible to be grafted onto the convergence technique at the automotive seat frame and show the esthetic sense.

• Journal of the Korea Convergence Society
• /
• v.9 no.4
• /
• pp.23-29
• /
• 2018

To reduce the accident rate caused by the delay of corrective action, which is common in the construction site, in order to shorten the time from correcting the existing system to the corrective action, I used a time similarity check to inform the inspectors of the problem in real time, modeling the system so that corrective action can be performed immediately on site, and studied a system that can actively cope with safety accidents. The research result shows that there is more than 90% opening effect and more than 60% safety accident reduction rate. I will continue to study more effective system combining voice recognition and deep learning based on this system.

• Journal of the Korean GEO-environmental Society
• /
• v.23 no.8
• /
• pp.17-22
• /
• 2022

To reduce the bump of bridge/earthwork transition area caused by the settlement of the soft ground during public use, the road agencies have been continuously overlay or repavement at those areas. In this study, the vehicle-mounted ground penetrating radar with 1GHz air-coupled antenna was used to estimate the settlement amount of those areas for nine bridges built in the soft ground. Results shows that it is possible to effectively measure the thickness of pavement up to a depth of 1 m on an asphalt road with ground penetrating radar technology that can inspect under the road surface. Distinctively deformation of the road surface, the variation in the thickness of the pavement measured at bridge/earth transition areas is equivalent to a minimum of 50 mm and a maximum of 600 mm, and there is a risk of cavity in the ground. The difference in the increased pavement thickness is 50~250 mm for each bridge connection, which may cause the differential settlement. In this study, by using the result of the ground penetration radar, a plan for improving drivability and maintenance of the settlement is suggested and applied to the field.